WenmarOpen by Wenmar Pro

Service bulletins for the 2018 Ford F-150

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

418 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

Bulletins, newest first
SSM 474522018-09-24. Service bulletin. ELECTRICAL SYSTEM. Some 2017-2019 F-Super Duty vehicles equipped with BLIS that have had the pickup box removed for upfitter modification may exhibit a BLIS warning message in the message center with no associated DTCs. Using the appropriate Ford scan tool at the latest level, re-configure the BLIS system to correct this concern. These settings can be found under toolbox > module programming > programmable parameters > warning lamps and chimes and must be adjusted in multiple modules. Details can be found on the truck body builder advisory service (BBAS) website, found by clicking the link at the bottom of the webpage at https://www.fleet.ford.com. Once at the BBAS website, click on bulletins, and refer to published qualified vehicle modifier (QVM) bulletin for BLIS warning programming. Changes the BLIS configuration as a result of upfitter modifications are non-warrantable.
SSM 474502018-09-24. Service bulletin. SERVICE BRAKES. Some 2018 F-Superduty/F-150/Explorer/Taurus/Flex/MKT vehicles built on 8-Mar-2018 and through 18-Jun-2018 may exhibit a soft brake pedal and/or long brake pedal travel. Bleed the brake system per Workshop Manual (WSM), Section 206-00. For claiming, use causal part BRAKE and applicable labor operations in Section 02 of the Service Labor Time Standards (SLTS) Manual.
SSM 474462018-09-24. Service bulletin. ENGINE AND ENGINE COOLING. Some Ford and Lincoln vehicles equipped with a 2.7L or 3.0L EcoBoost engine may exhibit an oil leak from the engine oil pan RTV seal. Replace the oil pan following the procedure in Workshop Manual (WSM) Section, 303-01. After removing the oil pan it is suggested to allow the crankcase to drain overnight to minimize the chance of residual oil contaminating the crankcase sealing rail. Remove all traces of old RTV and clean the engine sealing surface using only Motorcraftù Metal Brake Parts Cleaner, then wipe with Motorcraftù Metal Surface Prep Wipes and allow to air dry. Refer to WSM, Section 303-00 > RTV Sealing Surface Cleaning and Preparation. If possible, allow the new RTV sealant to cure for 4 hours before refilling the engine with oil. Skipping or improperly completing steps may result in repeat oil pan leaks.
SSM 474452018-09-24. Service bulletin. EQUIPMENT. 2018 F150 vehicles excluding Raptor built at Dearborn Truck Plant on or after 26-Feb-2018 and at Kansas City Assembly Plant on or after 10-Mar-2018 have the AAT sensor located in the right exterior mirror. The AAT sensor is serviced separately from the mirror assembly. If the vehicle is built on or after the dates listed above, do not add the sensor and harness behind the grill. If the sensor is missing from the right mirror the incorrect exterior mirror may have been installed. Refer to Ambient Air Temperature Sensor GSB G0000178 for additional information. The Workshop Manual (WSM) and Wiring Diagram have been updated for non-Raptor vehicles for the early and late build AAT sensor locations. The sensor location on Raptor vehicles has not changed.
SSM 474442018-09-24. Service bulletin. ELECTRICAL SYSTEM. Some 2016-2018 Ford and Lincoln vehicles equipped with SYNC 3 not at the latest software level may exhibit Various Performance Related concerns such as Display Operation, Navigation, Voice Recognition, Phone Pairing, Applink, Travel Link, Slow System Response, etc. Check for SYNC software update under the OASIS Tab SYNC selection. If an update is available refer to WSM, Section 415-00 and update the APIM software. After Installation, complete pop-up appears, remove USB flash drive and install into IDS tool to update Ford database. Perform a complete ignition cycle by turning the key off for 5 minutes which is critical for a successful installation. If no updates are available or a blue or black screen is present after an update refer to WSM, Section 415-00 for diagnosis or SYNC 3 intermittent blank screen GSB for tips. For claiming, use causal part 14G371 and applicable labor operations in section 10 of the SLTS manual.
SSM 474412018-09-24. Service bulletin. ENGINE AND ENGINE COOLING. Some 2018 F-150 vehicles equipped with a 5.0L engine may exhibit an illuminated MIL with DTCs P0390 and/or P0394. These DTCs may be caused by low engine oil level. Before performing any diagnosis or repair, make sure the oil level is between the minimum and maximum marks on the oil level indicator. If the oil level is below the minimum mark, diagnose the low oil level concern first. Refer to the Workshop Manual, Section 303-00. If the oil level is in the normal operating range, inspect C1627. If no concerns are present, replace the bank 2 (LH) exhaust variable camshaft timing (VCT) solenoid. Do not replace camshaft position sensors for these DTCs. For claiming, use causal part 6M280 and applicable labor operations in Section 06 of the Service Labor Time Standards (SLTS) Manual. Engineering is investigating, monitor OASIS for updates.
TSB 18-22702018-09-24. Service bulletin. ELECTRICAL SYSTEM. Some 2018 F-150 vehicles equipped with a 2.7L EcoBoost built on or before 12-Jul-2018 with greater than 500 miles may exhibit an illuminated MIL with diagnostic trouble codes (DTC) P0300, P0316, P0301-P0306, P2196, P2198, P0171, and/or P0174 stored in the powertrain control module (PCM). Follow the Service Procedure steps to correct the condition.
TSB 18-22642018-09-24. Service bulletin. ENGINE. Some 2018 F-Super Duty vehicles equipped with a 6.7L diesel engine may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes (DTCs) P00BD, P012F, P0181, P0474, P124C, P1247, P20EE, P205B, P2263, P2269, and/or P2459. Follow the Service Procedure steps to correct the condition.
TSB 18-22522018-09-24. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM); ELECTRICAL SYSTEM. Some 2018 F-150 vehicles equipped with a 3.3L Duratec/3.5L EcoBoost/5.0L built on or before 23-Jul-2018 at Dearborn Truck Plant or 31-Jul-2018 at Kansas City Assembly Plant may exhibit an illuminated MIL with DTC P2450 and/or P144C stored in the powertrain control module (PCM). Follow the Service Procedure steps to correct the condition.
TSB 18-22502018-09-24. Service bulletin. EQUIPMENT:APPLIANCE:AIR CONDITIONER. Some 2015-2018 F-150 vehicles equipped with a 3.3L/3.5L Duratec, 3.5L EcoBoost and 5.0L engine and equipped with a block heater may exhibit a lack of heat concern from the heating ventilation and air conditioning (HVAC) system when operating the vehicle consistently in temperatures that are below -20Å?C (4Å?F). This condition may be due to deposits from the engine coolant becoming trapped in the heater core. Follow the Service Procedure steps to correct the condition.
TSB 18-22492018-09-24. Service bulletin. ENGINE. Some 2018 F-150 vehicles equipped with a 2.7L EcoBoost and built on or before 27-Nov-2017 may exhibit an intermittent engine stall when coming to a stop while towing. Follow the Service Procedure steps to correct the condition.
TSB 18-22452018-09-24. Service bulletin. EQUIPMENT:APPLIANCE:AIR CONDITIONER. Some 2018 F-150 vehicles equipped with a 3.0L diesel engine built on or before 13-Aug-2018 may exhibit a lack of cooling from the A/C system. Follow the Service Procedure steps to correct the condition.
TSB 18-22442018-09-24. Service bulletin. ENGINE AND ENGINE COOLING. Some 2015-2018 F-150 vehicles equipped with a 3.3L, 3.5L Duratec, 3.5L EcoBoost and 5.0L engine without a block heater may exhibit a lack of heat concern from the heating ventilation and air conditioning (HVAC) system when operating the vehicle in temperatures consistently below -20 degrees C (4 degrees F). This condition may be due to deposits from the engine coolant becoming trapped in the heater core. Follow the Service Procedure steps to correct the condition.
SSM 474062018-09-10. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY; ENGINE. Some 2017-2018 F-150 and 2018 Navigator vehicles equipped with a 3.5L EcoBoost and built on or before 09-Mar-2018 may exhibit excessive oil consumption. If there are no visible external oil leaks, replace both engine valve covers. Refer to Workshop Manual, Section 303-01. For claiming, use causal part 6582 and applicable labor operations in Section 6 of the Service Labor Time Standards (SLTS) Manual.
SSM 473952018-09-10. Service bulletin. VISIBILITY:SUN/MOON ROOF ASSEMBLY; EQUIPMENT. Some 2015-2018 F-150, 2017-2018 F-Super Duty, 2018 Expedition/Navigator vehicles equipped with a vista roof opening panel may exhibit a concern with the glass panel brackets. The brackets may crack and/or break apart resulting in symptoms that include but are not limited to binding/sticking, glass stuck open or closed, noisy operation including chatter, rattling, or grinding. The roof opening panel glass brackets are available for service as a kit (FL3Z-1651070-C). Refer to Workshop Manual (WSM), Section 501-17 for diagnosis and repair procedures. Make sure the track is free of debris prior to assembly. For claiming, use causal part 1651070 and applicable labor operations in Section 12 of the Service Labor Time Standards (SLTS) Manual. Labor operations for removal and installation of the glass and glass brackets (guides) apply.
tsb18-22112018-09-10. Service bulletin. ELECTRICAL SYSTEM; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM). Some 2018 F-150 vehicles equipped with a 2.7L, 3.5L, or 5.0L engine and built on or before 4-May-2018 may exhibit an illuminated MIL with DTC P27B6 stored in the powertrain control module (PCM). Follow the Service Procedure steps to correct the condition.
SSM 473942018-07-23. Service bulletin. EQUIPMENT; ENGINE AND ENGINE COOLING. Some 2013-2018 F-150, 2015-2018 Transit/Expedition, and 2015-2017 Navigator vehicles equipped with a 3.5L EcoBoost engine with greater than 20,000 miles may exhibit a tick type noise from the cylinder block area. This noise may be caused by a cracked piston skirt. The noise can be isolated to a cylinder using a stethoscope or other suitable listening device. Canceling the affected cylinder will reduce or eliminate the noise. If the noise is isolated to a specific cylinder, it is recommended to replace the short block. If the noise cannot be isolated using the methods described, refer to the Workshop Manual (WSM) for diagnosis. A cracked piston skirt does not result in metal contamination of the engine or any related cylinder head damage. Prior approval for short block replacement is not required under new vehicle limited warranty coverage.
SSM 473832018-07-23. Service bulletin. EQUIPMENT; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM). Some 2018 F-150 vehicles equipped with a 3.0L diesel engine may have DTC U0415 set in the powertrain control module (PCM) after a key on engine off (KOEO) or key on engine running (KOER) self-test. Do not attempt any repairs for this DTC at this time. Monitor OASIS for updates.
SSM 473802018-07-23. Service bulletin. EQUIPMENT; EQUIPMENT ADAPTIVE/MOBILITY; ELECTRICAL SYSTEM. Some 2016-2018 Ford and Lincoln vehicles with SYNC 3 may exhibit an intermittent blue or black screen. Check for SYNC software update under the OASIS Tab SYNC selection. If update is available refer to WSM, Section 415-00 and update APIM software. After Installation Complete pop-up appears, remove USB flash drive and install into IDS tool to update Ford database. Perform a complete ignition cycle by turning the key off for 5 minutes which is critical for a successful installation. If no updates are available or a blue or black screen is present after an update refer to WSM, Section 415-00 for diagnosis or SYNC 3 intermittent blank screen GSB for tips. For claiming, use causal part 14G371 and applicable labor operations in section 10 of the SLTS manual.
SSM 473792018-07-23. Service bulletin. ELECTRICAL SYSTEM; EQUIPMENT. Various 2016-2018 vehicles with SYNC 3 may experience a touch screen that does not respond to any input. Using the Professional Technician Society (PTS) website > OASIS tab > SYNC version, verify the vehicle SYNC software version. If the vehicle is at version 2.2 please update the module to the latest software level. After the software is updated make sure you shut the vehicle off, open the door for 2 minutes, then turn the key back on before testing the touch screen. If the software is at a later version than 2.2, proceed with normal diagnostics in Workshop Manual (WSM), Section 415-00. For claiming, use causal part 14G371 and applicable labor operations in section 10 of the Service Labor Times Standards (SLTS) manual.
SSM 473772018-07-23. Service bulletin. ENGINE; EQUIPMENT. Some 2017-2018 F-150 vehicles equipped with a 3.5L EcoBoost engine built at Kansas City Assembly Plant on or before 23-Feb-2018 or Dearborn Truck Plant on or before 26-Feb-2018 may exhibit an oil leak from the oil pan RTV seal. Replace the oil pan following the procedure in Workshop Manual (WSM) Section, 303-01. After removing the oil pan, it is suggested to allow the crankcase to drain overnight to minimize the chance of contaminating the sealing rail. Prepare the engine sealing surface following the procedure in WSM Section, 303-00. Proper usage of the Motorcraftù Metal Surface Prep Wipes is critical. If possible, allow the new RTV sealant to cure for 4 hours before refilling the engine with oil. Correctly following the WSM procedures is critical. Skipping or improperly completing steps may result in repeat oil pan leaks.
SSM 473762018-07-23. Service bulletin. ENGINE; EQUIPMENT. Some 2013-2018 F-150, 2015-2018 Transit/Expedition, and 2015-2017 Navigator vehicles equipped with a 3.5L EcoBoost engine with greater than 20,000 miles may exhibit a tick type noise from the cylinder block area. This noise may be caused by a cracked piston skirt. The noise can be isolated to a cylinder using a stethoscope or other suitable listening device. Canceling the affected cylinder will reduce or eliminate the noise. If the noise is isolated to a specific cylinder, it is recommended to replace the short block. If the noise cannot be isolated using the methods described, refer to the Workshop Manual (WSM) for diagnosis. A cracked piston skirt does not result in metal contamination of the engine or any related cylinder head damage. Short block replacement does not require prior approval.
SSM 473652018-07-23. Service bulletin. EQUIPMENT; ENGINE. Some 2018 F150, Navigator and Expedition vehicles equipped with 3.5L EcoBoost engine may experience malfunction indicator lamp (MIL) illumination with Diagnostic Trouble Code(s) DTC P0365 and/or P0369. This may be due to low engine oil level, low engine oil pressure or damaged variable camshaft timing (VCT) phasers. Before performing Powertrain Control and Emissions Diagnostics (PC/ED) Manual diagnostics, inspect the engine oil level and evaluate any abnormal VCT noise conditions. If engine oil level is correct, and no unusual engine noises are present, proceed with normal PC/ED diagnostics test PPT 'DR'.
SSM 473632018-07-23. Service bulletin. EQUIPMENT; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM); ENGINE AND ENGINE COOLING:ENGINE:DIESEL. Some 2018 F-150 vehicles equipped with a 3.0L diesel engine may have DTC P061B set in the powertrain control module (PCM) after scan tool requested engine speed control. This may include engine speed output state control in data logger, key on engine running (KOER) self-test, or a manual diesel particulate filter (DPF) regeneration where engine speed is increased during the regeneration. Disregard this DTC. Engineering is aware of this concern. Monitor OASIS for updates.
SSM 473602018-07-23. Service bulletin. EQUIPMENT:MECHANICAL; EQUIPMENT; EQUIPMENT ADAPTIVE/MOBILITY. Some 2013-2018 F-150 and 2017-2018 Expedition/Navigator vehicles may exhibit an intermittent grinding noise coming from the right or left IWE area in 2WD mode. This may be caused by an intermittent leak in the check valve. Before completing any normal diagnosis suspect that the check valve is the root cause of the issue. If the check valve has been ruled out as the root cause for the issue refer to Work Shop Manual 308-07 and follow normal diagnosis.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.