WenmarOpen by Wenmar Pro

Service bulletins for the 2025 Ford Bronco

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

103 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

Only bulletins with component: Throttle and cruise control are shown. Show all

Bulletins, newest first
SSM 547722026-04-28. Service bulletin. VEHICLE SPEED CONTROL; FORWARD COLLISION AVOIDANCE: ADAPTIVE CRUISE CONTROL; POWER TRAIN. Some 2025-2026 Bronco vehicles may exhibit various cruise control, pre-collision and/or front stabilizer bar disconnect related warning messages displayed in the instrument panel cluster (IPC) with diagnostic trouble code (DTC) U0418:86 stored in the image processing module A (IPMA) and no wheel speed sensor specific DTCs present in the anti-lock brake (ABS) module. DTC U0415:00 may also be stored in the CHCM. If a vehicle exhibits this condition, carefully inspect the rear wheel speed sensors for correct installation with the rear wheel speed sensor body seated flush against the axle housing. Repair or replace the affected rear wheel speed sensor as needed, clear the DTC, and retest. Refer to Workshop Manual (WSM), Section 206-09. If the condition persists, advise the customer that Engineering is working on a software robustness solution that is expected to be available Q2 2026. <br /><br /> This condition does not affect vehicle durability, and additional diagnosis or service is not recommended at this time. Replacement or reprogramming of the IPMA and/or ABS modules will not resolve this condition.
SSM 546732026-04-06. Service bulletin. VEHICLE SPEED CONTROL; ELECTRICAL SYSTEM. Some 2025-2026 Bronco Badlands and Raptor only vehicles may exhibit a "Cruise Control Not Available" or "Active Cruise Control Not Available" message displayed in the instrument panel cluster (IPC) with diagnostic trouble code (DTC) U0418:86 stored in the image processing module A (IPMA) and no DTCs present in the anti-lock brake (ABS) module.
SSM 538602025-06-02. Service bulletin. VEHICLE SPEED CONTROL. Some 2025 Bronco vehicles may exhibit an illuminated anti-lock brake system (ABS) warning indicator with diagnostic trouble code (DTC) U3012:68 stored in the ABS module. The vehicle may also exhibit any of the following symptoms: a soft brake pedal following vehicle start-up, various brake system illuminated warning lamps and/or brake-related messages displayed in the instrument panel cluster (IPC).

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.