WenmarOpen by Wenmar Pro

Service bulletins for the 2019 Dodge Durango

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

404 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

Only bulletins with component: Brakes are shown. Show all

Bulletins, newest first
S18080001522024-01-02. Service bulletin. SERVICE BRAKES. CEL (Check Engine Lamp) Illuminates, Recent PCM Replace or Flash Update Performed, Diagnostic Trouble Codes (DTCs) P057B Brake Pedal Position Sensor Circuit Performance, P1572 Brake Pedal Stuck, C0042-54 Brake Pedal Missing Calibration
S21080001702023-01-17. Service bulletin. PARKING BRAKE. Head unit button stuck DTC code B14DA-2A
S2208000138RevA2022-12-12. Service bulletin. SERVICE BRAKES. Decreased Remote Start And RKE Range. Tire Pressure Sensors Values Are Not Displayed
S21080001702022-09-26. Service bulletin. PARKING BRAKE. Head unit button stuck DTC code B14DA-2A
9004548RevB2022-09-26. Service bulletin. ELECTRICAL SYSTEM; SERVICE BRAKES, HYDRAULIC. Module, Anti-lock brake system / Hydraulic Control Unit Some 2018-19 WD/WK vehicles have the brake lights staying on without depressing the brake pedal as an affect of DTC C1093-62 occurring or due to an internal failure in the HCU/ABS Module please contact FCA Redacted Content. If there is no response within 15 minutes of initiating your call, please - Obtain a vehicle scan report with the diagnostic environmental data. - Record the Primary Pressure Sensor value ($2002) and the Primary Pressure Sensor offset ($2007). - then, continue with your normal diagnostic process, if possible please avoid seperating the ECU and HCU.
9004548RevA2022-09-26. Service bulletin. ELECTRICAL SYSTEM; SERVICE BRAKES, HYDRAULIC. Module, Anti-lock brake system / Hydraulic Control Unit Some 2018-19 WD/WK vehicles have the brake lights staying on without depressing the brake pedal as an affect of DTC C1093-62 occurring or due to an internal failure in the HCU/ABS Module please contact FCA Redacted Content. If there is no response within 15 minutes of initiating your call, please - Obtain a vehicle scan report with the diagnostic environmental data. - Record the Primary Pressure Sensor value ($2002) and the Primary Pressure Sensor offset ($2007). - then, continue with your normal diagnostic process.
90045482022-09-26. Service bulletin. ELECTRICAL SYSTEM; SERVICE BRAKES. Module, Anti-lock brake system / Hydraulic Control Unit Some 2018-19 WD/WK vehicles have the brake lights staying on without depressing the brake pedal as an affect of DTC C1093-62 occurring or due to an internal failure in the HCU/ABS Module please contact FCA Redacted Content. If there is no response within 15 minutes of initiating your call, please continue with your normal diagnostic process.
S21090000012022-07-18. Service bulletin. SERVICE BRAKES. Customer may complain of a MIL lamp on. Upon further investigation there could be a fault code in the PCM for P1524 ? Oil Pressure Out of Range ? Camshaft Advance/Retard Disabled.
90042582020-06-22. Service bulletin. SERVICE BRAKES; EQUIPMENT. SENSOR, Park Assist For diagnostic issues relating to any of the following Park Assist error conditions: ·SERVICE PARK TRONICS ON CLUSTER ·VEHICLE WITH FAULT B1297-12-PTS SENSOR. ·CUSTOMER STATES PARK ASSIST NOT WORKING WITH SENSOR INOP The Product Development team requests that photos be taken of any suspected failed sensors before any repair to the sensor is started on the vehicle. Also, please email a copy of the VSR and sensor photos to the following FCA engineers: FCA Redacted Content We will review the scan report and photos, and let you know the next steps as soon as we can. If no response in 15 minutes, proceed with repair.
08-049-192019-07-15. Service bulletin. ELECTRICAL SYSTEM:IGNITION:ANTI-THEFT:CONTROL MODULE; PARKING BRAKE. Panic Button on FOBIK Inoperable This bulletin involves re-configuring the BCM to turn on the panic button. Customers may comment on the following:The panic button on the FOBIK does not work.
90040282019-07-15. Service bulletin. SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:MASTER CYLINDER. MASTER CYLINDER, Brake Prior to replacing master cylinder, please call Paul Kuehl at (248) 535 -7013 and/or Tim Parks at (248) 202-0919. If no response in 15 minutes, proceed with repair.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.