WenmarOpen by Wenmar Pro

Service bulletins for the 2013 Chevrolet Volt

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

1953 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Only bulletins with component: Lighting are shown. Show all

Bulletins, newest first
02-08-42-001J2024-01-19. Service bulletin. EXTERIOR LIGHTING. This informational bulletin provides information for dealers/technicians on Headlamp, Tail Lamp, License Lamp or Fog/Driving Lamp Damage.
130089004H2023-12-11. Service bulletin. VISIBILITY:WINDSHIELD; UNKNOWN OR OTHER; ELECTRICAL SYSTEM:SOFTWARE; EXTERIOR LIGHTING:LIGHTING CONTROL MODULE; ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL; VEHICLE SPEED CONTROL:THROTTLE:THROTTLE POSITION SENSOR (TPS). Car and Truck Fix it Right the First Time Issues
120941002B2023-12-04. Service bulletin. AIR BAGS; EXTERIOR LIGHTING. Passenger Presence System (PPS) May Command Seat Belt Reminder Chime Passenger Airbag Indicator On When Electronic Devices or Conductive Objects are Placed on Front Passenger Seat
1209410022023-12-04. Service bulletin. AIR BAGS; EXTERIOR LIGHTING. Passenger Presence System (PPS) May Command Seat Belt Reminder Chime Passenger Airbag Indicator On When Electronic Devices or Conductive Objects are Placed on Front Passenger Seat
PIC6089B2023-04-17. Service bulletin. POWER TRAIN; STRUCTURE; ELECTRICAL SYSTEM; EXTERIOR LIGHTING. This Preliminary Information communication provides information to the technician about vehicles that may have a Battery Saver Message or red Battery Indicator displayed in the Driver Information Center. Technician may find Diagnostic Trouble Code P0AF8 set in history. Technician will need to the 12 volt battery using the GR8 Battery tester. The technician will need to perform the Direct current Power Conversion Test published in Global Service Information to check for maximum current and voltage output. This test requires the use of a Carbon Pyle load tester. In addition, the technician can select the 14V Power Module Control Function in the Engine Control Module and Accessory Power Module Setpoint in the Body Control Module by using the Scan Tool in order to check that the system is able to respond to current loads. If the test fails, if there were low voltage Diagnostic Trouble Codes or P0AF8 was set, the technician should confirm that the 200 amp fuse located in the X50D Fuse Block is torqued to correct specification. Technician should check the voltage on both sides of the 200 amp Fuse while there is a load applied and comparing the voltage readings. Voltage drop can be checked from the positive battery post to the Accessory Power Module side of the 200 amp fuse as well. If the Accessory Power Module will output current under a load but the voltage is low on both sides of the fuse when compared to the voltage output at the Accessory Power Module, check the following Service Information for any other Diagnostic Trouble Codes that may have led to the low voltage condition, Accessory Power Module output terminal is clean and torqued to specification, The Accessory Power Module output cable ring terminal is properly seated to the Accessory Power Module output terminal post and its condition, and test the voltage drop on the ground cables to the engine block, transmission, body and chassis to ensure they are within specification.
01-08-42-001O2023-02-28. Service bulletin. EXTERIOR LIGHTING. This service bulletin provides information for dealers/technicians on Exterior Lamp Condensation and Water Leaks and Replacement Guidelines.
21NA2182022-02-14. Service bulletin. UNKNOWN OR OTHER; EXTERIOR LIGHTING. This bulletin provides a diagnostic service procedure to correct customer concerns of Reduced Propulsion (EREV), Malfunction Indicator Lamp (MIL) Illuminated with DTC P0C17, P1B03 and/or P0C01 Set.
010842001N2021-08-09. Service bulletin. EXTERIOR LIGHTING; EQUIPMENT ADAPTIVE/MOBILITY; EQUIPMENT. This service bulletin provides information for dealers/technicians on Exterior Lamp Condensation and Water Leaks and Replacement Guidelines.
010842001M2019-12-16. Service bulletin. EQUIPMENT; EXTERIOR LIGHTING; EQUIPMENT ADAPTIVE/MOBILITY. This informational bulletin provides information for dealers/technicians on Exterior Lamp Condensation and Replacement Guidelines.
010842001L2019-03-25. Service bulletin. EXTERIOR LIGHTING. This informational bulletin provides information for dealers/technicians on Exterior Lamp Condensation and Replacement Guidelines.
01-08-42-001J2018-05-07. Service bulletin. EXTERIOR LIGHTING. This informational bulletin explains condensation in exterior lights and replacment guidelines for warranty replacement.
PI0645C2018-04-16. Service bulletin. AIR BAGS; EXTERIOR LIGHTING. This preliminary informational bulletin provides information on the driver airbag light is flashing in the cluster and/or the passenger airbag ON indicator does not illuminate when the passenger is present when the SDM setup has not been completed after reprogramming.
02-08-42-001I2017-08-31. Service bulletin. EXTERIOR LIGHTING:HEADLIGHTS; EXTERIOR LIGHTING:BRAKE LIGHTS; EXTERIOR LIGHTING:BACK UP LIGHTS. This informational bulletin provides an out line on Headlamp, Tail Lamp, License Lamp or Fog/Driving Lamp Damage and what should be considered warranty replacement and not
01-08-42-001K2017-08-31. Service bulletin. EXTERIOR LIGHTING:HEADLIGHTS. This informational bulletin provides information on exterior lamp condinsation and replacement guidelines
15-08-42-0012017-08-15. Service bulletin. EXTERIOR LIGHTING. This informational bulletin communicates GM's position on exterior lighting components ?tinted or smoked? by an outside vendor.
PIP5077C2017-08-15. Service bulletin. EXTERIOR LIGHTING; ELECTRICAL SYSTEM. This Preliminary Information communication provides information to the technician about vehicles that have Malfunction Indicator Lamp on and the vehicle will not charge. Technician may find Diagnostic Trouble Code P0D22. Technician will need to update the K114B Hybrid Powertrain Control Module 2 with the current software in TIS-2-Web.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.