Service bulletins for the 2014 Chevrolet Camaro
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
1838 on file from NHTSA, as of 2026-10-19.
By type
By component
By trouble code
By topic
| 1008110001C | 2017-12-22. Service bulletin. EQUIPMENT. This information provides the proper way to install the floor mats . |
|---|---|
| 140420001A | 2017-12-22. Service bulletin. POWER TRAIN. This information bulletin provides a procedure to add a friction modifier to the rear differntial in the customers concern is a moan from the rear diff during slow and tight maneuvers. |
| 100089005D | 2017-12-22. Service bulletin. ELECTRICAL SYSTEM:WIRING. This warranty informational bulletin advised the technician that when performing a wiring repair, more information is required. |
| PI0137E | 2017-12-22. Service bulletin. POWER TRAIN:AXLE ASSEMBLY. This preliminary bulletin provides a procedure to repair the rear axle seals to correct the customers concern of a chatter or moan on low speed turns. |
| 17-NA-244 | 2017-12-22. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE. This informational bulletin provides information on Information on How to Prevent Inadvertent Vehicle Starting from Key Fob or OnStar Mobile Application and where to locate the information for future use. |
| 17-NA-239 | 2017-12-22. Service bulletin. PARKING BRAKE. This bulletin provides information on possible normal brake drag caused by sitting. |
| 17-NA-170 | 2017-12-22. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. This informational bulletin explains the Road Force balancers and what they can do for customer concerns. |
| 11-08-49-001V | 2017-12-22. Service bulletin. ELECTRICAL SYSTEM:12V/24V/48V BATTERY. This technical bulletin provides information on Transport Mode On Message Displayed in Driver Information Center (DIC) and/or Battery Light is Flashing and the procedures to turn the transport mode message on and off. |
| 04-00-89-015P | 2017-12-22. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. This warranty administration bulletin provide policy information on required operating procedures. |
| 00-06-01-026H | 2017-12-22. Service bulletin. ENGINE. This informational bulletin provides information on intake manifold inspection/replacement after severe internal engine damage. |
| 16-NA-223 | 2017-12-22. Service bulletin. SERVICE BRAKES. This informational bulletin provides information on installing the correct tires for vehicles with the condition of under hard acceleration at higher speeds, the traction control light will flash. Or, they may come in for ABS or general handling/braking concerns. |
| PIP5209 | 2017-12-22. Service bulletin. ELECTRICAL SYSTEM. This Preliminary Information communication provides information to the technician about vehicles that have Diagnostic Trouble Code P00C6 and/or P228C set. Technician will need to inspect the terminals at the Engine Control Module for fit and tension as well as the crimp to wire connection. Terminals to inspect in the ECM are connector x2 terminals 3, 18, and 19 for the fuel rail pressure sensor. Also connector x3 terminals 16 and 32 for the high pressure fuel pump. |
| PIP4112P | 2017-12-22. Service bulletin. ENGINE; POWER TRAIN. This Preliminary Information communication provides information to the technician of a complaint of a sag or hesitation when accelerating. The concern is present when coasting at low speeds of less than 15 miles per hour and then aggressively applying the throttle, or after making a hard stop followed by an aggressive throttle. This is considered normal operation of the vehicle the throttle is delayed and opened slowly up to .7 seconds to help minimize driveline lash and clunking or will have approximately .5 seconds of zero torque to allow the transmission to shift to first gear. |
| PIC5214C | 2017-12-22. Service bulletin. SERVICE BRAKES; WHEELS. This Preliminary Information communication provides information to the technician about vehicles that may have wheels that are collecting an excessive amount of brake dust. Dealer should advised the customer that This is considered a normal characteristic. |
| PIC6010 | 2017-12-22. Service bulletin. ELECTRICAL SYSTEM; STRUCTURE; EQUIPMENT. This Preliminary Information communication provides information to the technician that when double lock button press with the key fob, the horn will sound, but it will be at a reduced volume. In early Body Control Module calibrations resulted in the horn relay activating for only 10 milliseconds vs. 20 milliseconds. This, in turn, would not allow the horn to reach its full volume, and as a result, the horn chirp would sound noticeably quieter than an equivalent vehicle. As a running change during production, the Body Control Module calibrations were updated and the feature was eliminated. Technician can update the Body Control Module and the horn will sound at a normal volume level from that point on. |
| PIC5088E | 2017-12-22. Service bulletin. EQUIPMENT; EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC.. This Preliminary Information communication provides information to the technician about vehicles that may not receiving all channels on the XM band. Technician will need to use a scan tool and verify current Digital Radio Receiver Status under Data Display. Technician will need to look at the second line labeled Digital Radio Receiver Status will display a number of 00 - 04. Technician will repair per the status code. |
| PIC5588B | 2017-12-22. Service bulletin. EQUIPMENT:ELECTRICAL:NAVIGATIONAL SYSTEM(GLOBAL POSITIONING SYSTEM); EQUIPMENT. This Preliminary Information communication provides information to the technician on the programming and activation of the OnStar system. For many 2008 and prior model year GM vehicles, the programming is performed using the Tech 2 and the activation is initiated by a Service Programming System. For the 2010 and UP model year vehicles, the OnStar set-up procedure and OnStar Activation request have been combined into a single programming event called OnStar Set-up and Activation in Service Programming System. |
| PIC6006 | 2017-12-22. Service bulletin. ENGINE AND ENGINE COOLING:EXHAUST SYSTEM; ENGINE. This Preliminary Information communication provides information to the technician about vehicles that may have a rattle noise coming from their vehicle. Technician will confirm the noise is coming from the exhaust pipe coupling. Technician will also inspect the exhaust for damage. If nothing is found damaged, bend the J-shaped clip away from the exhaust pipe. |
| PIP4554K | 2017-12-22. Service bulletin. POWER TRAIN. This Preliminary Information communication provides the technician with the steps on repairing a clunk noise after shifting from reverse to drive or drive to reverse and then accelerating. The concern is only with rear wheel drive 6L45 or 6L50 automatic transmissions with Regular Production Option Code MYA or MYB apply. Apply thread locker to the transmission output shaft flange splines and install a new front propeller shaft flange nut. Apply thread locker to the new propeller shaft flange nut if it does not contain a pre-applied adhesive patch. |
| PIP4653E | 2017-12-22. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM); POWER TRAIN. This Preliminary Information communication provides information to the technician about vehicle that have a Malfunction Indicator Lamp on. Technician may find Diagnostic Trouble Codes P0601, P0603, P0604, P062F or P1621 stored in the Transmission Control Module. Technician will need to ensure that the Diagnostic Trouble Codes are set in the Transmission Control Module. If the Diagnostic Trouble Codes are only set in the Transmission Control Module reprogram the Transmission Control Module. |
| PIT5119F | 2017-12-14. Service bulletin. ELECTRICAL SYSTEM:IGNITION. This Preliminary Information communication provides information to the technician about vehicles that the keyless entry is inoperative. Technician should inspect the ignition key cylinder door sticks in the up position. If the door is found open do not replace the ignition key cylinder, use a Lubriplate type of lubrication spray and lubricate the ignition key cylinder door. Insert the tip of the key in and out to verify the door of the cylinder is not sticking. |
| PIC3100F | 2017-12-14. Service bulletin. ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL. This Preliminary Information communication provides information to the technician about vehicle's odometer appears to be inaccurate relative to a known distance traveled. Technician should obtain a hand-held GPS unit to test the odometer. If a hand held GPS unit is not available, the only other option is to verify the miles traveled using a surveyor's wheel or a dynamometer. |
| PIC5650C | 2017-11-14. Service bulletin. EQUIPMENT; ELECTRICAL SYSTEM. This Preliminary Information communication provides information to the technician about vehicles that have an intermittent no crank, no start, or start stall concern with the security light coming on. Technician may find Diagnostic Trouble Codes B3055, B3060, and/or B3935. Technician should not replace any parts for this concern. If unable to duplicate the concern ask if the customer uses any Radio Frequency Identification Devices when the concern is present. Dealer should also direct their customers to the appropriate section in the Owner manuals that references that the device complies. |
| PIP5528 | 2017-11-14. Service bulletin. ENGINE. This Preliminary information communicates the identification process for High Feature V6 camshafts in re-manufactured engines. |
| PIC5492F | 2017-11-14. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE. This Preliminary Information communication provides information to the technician about vehicles that have a Diagnostic Trouble Code B101D-37 history in the Vehicle Communication Interface Module or telematics communication interface control module. Engineering has determined that this code will only display in history on the scan tool and will not cause issues with OnStar system operation. |
The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.