WenmarOpen by Wenmar Pro

Service bulletins for the 2010 Chevrolet Camaro

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

1633 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Only bulletins with component: Wheels are shown. Show all

Bulletins, newest first
04-03-10-013K2017-08-31. Service bulletin. WHEELS. This informational bulletin provides information on driving characteristics of rear-wheel drive vehicles and available winter tires.
PIT3271G2017-08-15. Service bulletin. TIRES; WHEELS. This Preliminary Information communication provides information to the technician about changing the tire and wheel size on vehicles. General Motors will only support a tire calibration for tires that have been sized, tested and designed for the vehicle in question and its applications. Technician should not use the information that is provided by the antilock braking system tire size selection.
17-NA-1262017-08-15. Service bulletin. WHEELS:LUGS/NUTS/BOLTS/STUDS. This informational bulletin provides information on Non-Design Intent Wheel Lock Nuts and Lug Nuts.
08-03-10-004B2017-08-15. Service bulletin. TIRES; WHEELS. This informational bulletin communicates comprehensive instructions to GM Dealers and authorized GM Accessory Distributor/Installers as to the proper methods for mounting, balancing, and installing accessory wheels and tires.
PIC5521A2017-08-15. Service bulletin. WHEELS:LUGS/NUTS/BOLTS/STUDS; SEATS. This Preliminary Information communication provides information to the technician about a seat bolt that will spin when trying to remove the seat. Technician will need to remove the cage nut and weld the cage nut into place.
PIC5428E2017-08-15. Service bulletin. SERVICE BRAKES; WHEELS; ELECTRICAL SYSTEM. This Preliminary Information communication provides information to the technician on how to diagnose and repair vehicles that may have the Antilock Braking System, Service Traction Control System, and/or Service Stabilitrak lights are on. The Electronic Brake Control Module may have one or more of the following Diagnostic Trouble Codes C0035-C0050 with specifically symptom 18, 5A, or 0F. Technician will gain access to the correct wheel bear per the Diagnostic Trouble Code that is set. If debris is found on the magnetic encoder ring it will needed to be cleaned.
00-03-10-002J2017-08-15. Service bulletin. WHEELS. This informational bulletin provides information on chemical staining, pitting, and corrosion on wheels and the proper cleaners to use to fix the conditions due to multiple causes.
PIC5280D2017-08-15. Service bulletin. WHEELS. This Preliminary Information communication provides information to the technician about installing wheels and tires onto another vehicle after taking them off a different vehicle. General Motors does not recommend or authorize installing a 20 inch wheel onto a vehicle with a factory installed 18 inch wheel due to differences in the chassis components.
PIC5214D2017-08-15. Service bulletin. WHEELS; SERVICE BRAKES. This Preliminary Information communication provides information to the technician about vehicles that may have wheels that are collecting an excessive amount of brake dust. Dealer should advised the customer that This is considered a normal characteristic.
PIC5280E2017-08-15. Service bulletin. WHEELS; TIRES. This Preliminary Information communication provides information to the technician about installing wheels and tires onto another vehicle after taking them off a different vehicle. General Motors does not recommend or authorize installing a 20 inch wheel onto a vehicle with a factory installed 18 inch wheel due to differences in the chassis components.
PIP4554J2017-08-15. Service bulletin. WHEELS; POWER TRAIN:AUTOMATIC TRANSMISSION; POWER TRAIN. This Preliminary Information communication provides the technician with the steps on repairing a clunk noise after shifting from reverse to drive or drive to reverse and then accelerating. The concern is only with rear wheel drive 6L45 or 6L50 automatic transmissions with Regular Production Option Code MYA or MYB apply. Apply thread locker to the transmission output shaft flange splines and install a new front propeller shaft flange nut. Apply thread locker to the new propeller shaft flange nut if it does not contain a pre-applied adhesive patch.
PIC5280E2016-06-22. Service bulletin. WHEELS. SUMMARY TO BE PROVIDED ON A FUTURE DATE.
PIC5214D2016-06-22. Service bulletin. WHEELS; SERVICE BRAKES. SUMMARY TO BE PROVIDED ON A FUTURE DATE.
PIC5214C2016-06-22. Service bulletin. WHEELS; SERVICE BRAKES. SUMMARY TO BE PROVIDED ON A FUTURE DATE.
PIC5280D2016-06-17. Service bulletin. WHEELS. SUMMARY TO BE PROVIDED ON A FUTURE DATE.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.