WenmarOpen by Wenmar Pro

Service bulletins for the 2015 Cadillac Escalade

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

2518 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Only bulletins with component: Glass, wipers and mirrors are shown. Show all

Bulletins, newest first
PI1103C2018-05-29. Service bulletin. VISIBILITY:REARVIEW MIRRORS/DEVICES; ELECTRICAL SYSTEM; SEATS:FRONT ASSEMBLY:POWER ADJUST. This preliminary informational bulletin provides a procedure for the technician to test the power seats, the outside power mirriors, shorts in the wiring and the MSM, and reprogram the module if shorts weren't found, for the customers concern of the mirriors and/or seat inoperative.
PI11872018-05-21. Service bulletin. EQUIPMENT; VISIBILITY:WINDSHIELD; VISIBILITY:REARVIEW MIRRORS/DEVICES:INTERIOR. This preliminary bulletin provides a repair to replace the windshield to fix the customers concern of the inside rearview mirrior loose or fell off with bracket.
PI1103D2018-05-21. Service bulletin. SEATS:FRONT ASSEMBLY:POWER ADJUST; VISIBILITY:REARVIEW MIRRORS/DEVICES:EXTERIOR; ELECTRICAL SYSTEM; SEATS. This preliminary informational bulletin provides a procedure for the technician to test the power seats, the outside power mirriors, shorts in the wiring and the MSM, and reprogram the module if shorts weren't found, for the customers concern of the mirriors and/or seat inoperative.
06-08-64-001D2018-05-21. Service bulletin. VISIBILITY:GLASS, SIDE/REAR; STRUCTURE:BODY:DOOR. This Informational bulletin describes warranty part reviews where door glass had chips or scratches.
PI0754C2018-05-21. Service bulletin. VISIBILITY:GLASS, SIDE/REAR. This PI bulletin provides information on Rear and Side Tempered Glass Spots (Quench Marks) and they are normal characteristic.
18NA0792018-05-21. Service bulletin. VISIBILITY:POWER WINDOW DEVICES AND CONTROLS; ELECTRICAL SYSTEM:WIRING; STRUCTURE:BODY:DOOR. This technical bulletin provides a procedure to replace the drivers front door window regulator motor and door wiring harness if water and/or corrosion is found in the connectors.
16NA1712018-05-21. Service bulletin. VISIBILITY:DEFROSTER/DEFOGGER/HVAC SYSTEM:REAR WINDOW. This technical bulletin provides a procedure to reinstall the rear defroster tab on the rear window defogger for vehicles with the condition of rear defrosters inoperative or if one is to break during a normal repair.
PI14542018-05-07. Service bulletin. BACK OVER PREVENTION; VISIBILITY:POWER WINDOW DEVICES AND CONTROLS. This preliminary informational bulletin provides repair information for a customer concern of intermittent clicking/rubbing noise when side door glass is moving up or down at cold temperatures.
PIT54562018-01-22. Service bulletin. VISIBILITY:SUN/MOON ROOF ASSEMBLY. This Preliminary Information communication provides information to the technician about vehicles with a water leak and/or hiss type wind noise from the sunroof or headliner area. Technician should replace the sunroof seal to repair the concern.
PI0373B2017-12-22. Service bulletin. VISIBILITY:REARVIEW MIRRORS/DEVICES. This preliminary bulletin provides a procedure on how to reset the power folding mirriors after they been folded manually, to fix the customers concern of the mirriors shaking or fluttering at normal driving speeds.
PIT5290A2017-12-22. Service bulletin. VISIBILITY:DEFROSTER/DEFOGGER/HVAC SYSTEM; ENGINE AND ENGINE COOLING; EQUIPMENT:APPLIANCE:AIR CONDITIONER. This Preliminary Information communication provides information to the technician about vehicles that may have a rear Heater-Vent-Air Conditioning is inoperative, but the front Heater-Vent-Air Conditioning blows cold and works normally. Technician will need to replace the Thermo Static Expansion Valve with part number 25914263 into the liquid line.
16-NA-1712017-10-05. Service bulletin. VISIBILITY:DEFROSTER/DEFOGGER/HVAC SYSTEM:REAR WINDOW; EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. This informational bulletin provides repair information on reconnection of rear window (defroster) contact or tab.
PIT5288E2017-08-15. Service bulletin. ELECTRONIC STABILITY CONTROL (ESC); VISIBILITY; STEERING; TIRES; ELECTRICAL SYSTEM. This Preliminary Information communication provides information to the technician about vehicles that may have any of these concerns remote keyless entry, passive Entry and Start Inoperative, No Fob detect message on driver information center, service tire pressure system, no audio, touch screen Inoperative, Steering Wheel Controls Inoperative, Service Stabilitrak, rear power windows inoperative, rear wiper inoperative, and or a dead battery. Technician may find Diagnostic Trouble Codes B3101, B144C, C0710, C0544, U1548, U1549, U154A, U0151, U0126, U0415, U0077, U0028 and/or U0029. Technician should inspect the left instrument panel for the wire harness being pinched. Technician will need to repair the wire harness and reroute the wire harness.
PIT5318A2017-08-15. Service bulletin. VISIBILITY:SUN/MOON ROOF ASSEMBLY; STRUCTURE; STRUCTURE:BODY:ROOF AND PILLARS. This Preliminary Information communication provides information to the technician on a concern of body pressure booming. This concern may be more noticeable when the active fuel management is engages and the engine is in 4 cylinder mode. The roof sheet metal may not be attached to the roof bows any longer. If equipped with a sunroof it may leak or be misaligned with the roof. Technician is to follow the steps to apply vibration control material between the roof bow and the roof sheet metal. Any roof bow that is no longer bonded to the sheet metal must be repaired. Remove the old material with an appropriate tool. Once the old material is removed install the appropriate thickness foam shim to fill the gap between the roof sheet metal and the roof bow. The foam should be placed in 5 inch lengths and placed in 5 locations along the bow using vibration control material to fill the distance between the foam shim. If the space between the bow is 6 millimeters or less just use the vibration control material.
PIT53472017-08-15. Service bulletin. VISIBILITY:SUN/MOON ROOF ASSEMBLY. This Preliminary Information communication provides information to the technician about vehicles that when driving at highway speeds and closing the sunroof, it will reverse when it reaches the air deflector. Dealer will need to replace the sunroof motor for this concern.
PIT5318B2017-08-15. Service bulletin. STRUCTURE:BODY:ROOF AND PILLARS; STRUCTURE:BODY; STRUCTURE; VISIBILITY:SUN/MOON ROOF ASSEMBLY. This Preliminary Information communication provides information to the technician on a concern of body pressure booming. This concern may be more noticeable when the active fuel management is engages and the engine is in 4 cylinder mode. The roof sheet metal may not be attached to the roof bows any longer. If equipped with a sunroof it may leak or be misaligned with the roof. Technician is to follow the steps to apply vibration control material between the roof bow and the roof sheet metal. Any roof bow that is no longer bonded to the sheet metal must be repaired. Remove the old material with an appropriate tool. Once the old material is removed install the appropriate thickness foam shim to fill the gap between the roof sheet metal and the roof bow. The foam should be placed in 5 inch lengths and placed in 5 locations along the bow using vibration control material to fill the distance between the foam shim. If the space between the bow is 6 millimeters or less just use the vibration control material.
PIC60862017-08-15. Service bulletin. VISIBILITY:REARVIEW MIRRORS/DEVICES; VISIBILITY:WINDSHIELD. This Preliminary Information communication provides information to the technician about vehicles that may have an oily substance is found on the inside windshield surface and appears to be leaking from the rear view mirror area. Technician should inspect the moisture sensor for being the source of the leak, if found to be leaking, carefully remove the moisture sensor. Clean the glass surface and sensor bracket with an isopropanol alcohol wipe until the surfaces are clean, then re-install the moisture sensor.
06-08-43-003E2017-08-15. Service bulletin. VISIBILITY:WINDSHIELD WIPER/WASHER. This informational bulletin explains how to care for wiper blades.
PIC6086D2017-08-15. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY; VISIBILITY. This Preliminary Information communication provides the technician with steps to resolve the issue of an oily substance that may be found on the inside windshield surface, and appears to be leaking from the rear view mirror area. Technician will remove the moisture sensor and clean the glass and mounting bracket with alcohol wipe. If the gel separates from the sensor the sensor will need to be replaced.
PIT5535B2017-08-15. Service bulletin. LANE DEPARTURE; VISIBILITY:WINDSHIELD. This Preliminary Information communication provides information to the technician about vehicles thatmay have Service Front Camera, Service Lane Departure Warning, and Service Lane Keep Assist Message. Technician may find Diagnostic Trouble Code B1008 Sym 4B set. Technician will need to check the windshield to ensure it is not aftermarket. Technician will also check for anything that may impair the front view camera and ensure the camera is properly mounted.
PIC6086C2017-08-15. Service bulletin. VISIBILITY:WINDSHIELD; VISIBILITY:REARVIEW MIRRORS/DEVICES:EXTERIOR. This Preliminary Information communication provides the technician with steps to resolve the issue of an oily substance that may be found on the inside windshield surface, and appears to be leaking from the rear view mirror area. Technician will remove the moisture sensor and clean the glass and mounting bracket with alcohol wipe. If the gel separates from the sensor the sensor will need to be replaced.
16-NA-0752017-08-15. Service bulletin. VISIBILITY:REARVIEW MIRRORS/DEVICES:EXTERIOR. This technical bulletin provides a procedure to relearn the power folding mirriors and road test to correct a conditon of power fold away mirriors glass shakes or flutters at normal driving speeds
PIC6086B2017-05-05. Service bulletin. VISIBILITY:WINDSHIELD. THIS PRELIMINARY INFORMATION COMMUNICATION PROVIDES THE TECHNICIAN WITH STEPS TO RESOLVE THE ISSUE OF AN OILY SUBSTANCE THAT MAY BE FOUND ON THE INSIDE WINDSHIELD SURFACE, AND APPEARS TO BE LEAKING FROM THE REAR VIEW MIRROR AREA. TECHNICIAN WILL REMOVE THE MOISTURE SENSOR AND CLEAN THE GLASS AND MOUNTING BRACKET WITH ALCOHOL WIPE. IF THE GEL SEPARATES FROM THE SENSOR THE SENSOR WILL NEED TO BE REPLACED.
152762017-02-01. Service bulletin. VISIBILITY:WINDSHIELD. 15276 - SERVICE UPDATE. THIS BULLETIN PROVIDES AN INSPECTION AND SERVICE PROCEDURE TO VERIFY THE CORRECT WINDSHIELD WAS INSTALLED ON CERTAIN 2015 MODEL YEAR CADILLAC ESCALADE VEHICLES EQUIPPED WITH HEAD-UP DISPLAY (UV6). THESE VEHICLES MAY EXHIBIT A HEAD-UP DISPLAY IMAGE THAT IS BLURRY OR HAS A DOUBLE IMAGE APPEARANCE.
PIT5456A2016-11-03. Service bulletin. STRUCTURE; VISIBILITY:SUN/MOON ROOF ASSEMBLY. THIS PRELIMINARY INFORMATION COMMUNICATION ADVISES THE TECHNICIAN OF THE STEPS FOR DIAGNOSING AND REPAIRING THE CONCERN WHEN THE VEHICLE HAS A WATER LEAK AND OR WIND NOISE FROM SUNROOF.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.