Service bulletin 15276

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

The communication, as NHTSA indexes it (as of 2026-10-19)
Type	Service bulletin
NHTSA id	10090067
Published by NHTSA	2017-02-01
Manufacturer's number	15276
Manufacturer's date	2015-04-07
NHTSA component	VISIBILITY:WINDSHIELD

NHTSA's summary

15276 - SERVICE UPDATE. THIS BULLETIN PROVIDES AN INSPECTION AND SERVICE PROCEDURE TO VERIFY THE CORRECT WINDSHIELD WAS INSTALLED ON CERTAIN 2015 MODEL YEAR CADILLAC ESCALADE VEHICLES EQUIPPED WITH HEAD-UP DISPLAY (UV6). THESE VEHICLES MAY EXHIBIT A HEAD-UP DISPLAY IMAGE THAT IS BLURRY OR HAS A DOUBLE IMAGE APPEARANCE.

The document

No address for NHTSA's copy can be built for this communication. Ask the dealer for it by the manufacturer's number.

Components

Glass, wipers and mirrors, Windshield

Vehicles listed
CADILLAC ESCALADE	2015
CADILLAC ESCALADE ESV	2015 (the catalog's model; the bulletin names a series or trim of it)

Listing a model year does not mean every vehicle of it is concerned: the document says which.

Other bulletins for the same vehicles and component
PIC6086E	2018-11-26. Service bulletin. This Preliminary Information communication provides the technician with steps to resolve the issue of an oily substance that may be found on the inside windshield surface, and appears to be leaking from the rear view mirror area. Technician will remove the moisture sensor and clean the glass and mounting bracket with alcohol wipe. If the gel separates from the sensor the sensor will need to be replaced.
060089026N	2018-06-04. Service bulletin. This warranty bulletin provides labor operation numbers for customer concerns that cant be duplicated.
PI1290	2018-05-29. Service bulletin. This preliminary bulletin provides a procedure to replace the windshild to correct the customers concern of a loose mirrior and/or bracket fell off.
05-08-48-001D	2018-05-29. Service bulletin. This warranty administration bulletion provides the dealer technician information and guidelines for claiming a windshield.
PI1187	2018-05-21. Service bulletin. This preliminary bulletin provides a repair to replace the windshield to fix the customers concern of the inside rearview mirrior loose or fell off with bracket.
PIC6086	2017-08-15. Service bulletin. This Preliminary Information communication provides information to the technician about vehicles that may have an oily substance is found on the inside windshield surface and appears to be leaking from the rear view mirror area. Technician should inspect the moisture sensor for being the source of the leak, if found to be leaking, carefully remove the moisture sensor. Clean the glass surface and sensor bracket with an isopropanol alcohol wipe until the surfaces are clean, then re-install the moisture sensor.
PIT5535B	2017-08-15. Service bulletin. This Preliminary Information communication provides information to the technician about vehicles thatmay have Service Front Camera, Service Lane Departure Warning, and Service Lane Keep Assist Message. Technician may find Diagnostic Trouble Code B1008 Sym 4B set. Technician will need to check the windshield to ensure it is not aftermarket. Technician will also check for anything that may impair the front view camera and ensure the camera is properly mounted.
PIC6086C	2017-08-15. Service bulletin. This Preliminary Information communication provides the technician with steps to resolve the issue of an oily substance that may be found on the inside windshield surface, and appears to be leaking from the rear view mirror area. Technician will remove the moisture sensor and clean the glass and mounting bracket with alcohol wipe. If the gel separates from the sensor the sensor will need to be replaced.
PIC6086B	2017-05-05. Service bulletin. THIS PRELIMINARY INFORMATION COMMUNICATION PROVIDES THE TECHNICIAN WITH STEPS TO RESOLVE THE ISSUE OF AN OILY SUBSTANCE THAT MAY BE FOUND ON THE INSIDE WINDSHIELD SURFACE, AND APPEARS TO BE LEAKING FROM THE REAR VIEW MIRROR AREA. TECHNICIAN WILL REMOVE THE MOISTURE SENSOR AND CLEAN THE GLASS AND MOUNTING BRACKET WITH ALCOHOL WIPE. IF THE GEL SEPARATES FROM THE SENSOR THE SENSOR WILL NEED TO BE REPLACED.
PIC-6086-A	2016-08-24. Service bulletin. THIS PRELIMINARY INFORMATION COMMUNICATION PROVIDES THE TECHNICIAN WITH STEPS TO RESOLVE THE ISSUE OF AN OILY SUBSTANCE THAT MAY BE FOUND ON THE INSIDE WINDSHIELD SURFACE, AND APPEARS TO BE LEAKING FROM THE REAR VIEW MIRROR AREA. TECHNICIAN WILL REMOVE THE MOISTURE SENSOR AND CLEAN THE GLASS AND MOUNTING BRACKET WITH ALCOHOL WIPE. IF THE GEL SEPARATES FROM THE SENSOR THE SENSOR WILL NEED TO BE REPLACED.