WenmarOpen by Wenmar Pro

Service bulletins for the 2016 Cadillac ATS

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

1582 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Bulletins, newest first
PIP5640A2021-05-17. Service bulletin. WHEELS. This Preliminary Information communication provides information to the technician to not remove the torque converter bolts and start the engine as this may cause damage to the torque converter of the crankshaft on vehicles equipped with an automatic transmission.
PIP58032021-05-17. Service bulletin. EQUIPMENT; POWER TRAIN. This Preliminary information communicates to technician's if they remove the front timing cover when perprming a repair, they should inspect the timing chain guide upper bolt for being loose. This document is an attempt to collect parts so engineering can investigate the concern.
PIP58022021-05-17. Service bulletin. POWER TRAIN. This Preliminary information communicates diagnostic assistance for DTC's P219A and P219B.
PIP5247A2021-05-17. Service bulletin. SERVICE BRAKES; ENGINE AND ENGINE COOLING; EXTERIOR LIGHTING. This Preliminary Information communication provides information to the technician about vehicles that have a Service Engine Soon Malfunction Indicator Lamp. Technician may find Diagnostic Trouble Code P06DE set in the Engine Control Module. P0651 may also be set in the ECM with the P06DE. Technician must follow published Service Information diagnostics for P06DE. If diagnostics lead to removing the oil pan or engine oil pressure is below specification when hot, to inspect the oil piston nozzles for damage. Technician should replace the broken oil nozzle(s) as long as the engine does not have any damage which warrants engine replacement.
110089005Q2021-05-03. Service bulletin. EQUIPMENT. This Warranty Administration bulletin provides information on Dealer Empowerment for Goodwill, Customer Enthusiasm and Policy (U.S. Only).
1008110001I2021-05-03. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY. This informational bulletin provides information on proper use of floor mats.
21NA0432021-05-03. Service bulletin. EQUIPMENT. This informational bulletin advises the dealers to maintain the vehicle stock on hand by doing a full inspection on the vehicles before sold (prepping) to the customer.
20NA1382021-05-03. Service bulletin. ENGINE AND ENGINE COOLING; POWER TRAIN. This bulletin provides information on Policies Applicable to All U.S. Dealers for Engine and Transmission Assembly Replacement Under Warranty, Policy or Customer Enthusiasm and information on Submission of Warranty Transaction in Global Warranty Management.
20NA1322021-05-03. Service bulletin. ELECTRICAL SYSTEM. This warranty administration bulletin provides policy information on the requirements for battery testing and warranty replacements.
18NA3062021-05-03. Service bulletin. EQUIPMENT. This Warranty Administration bulletin provides information for dealers/Service advisors on when and how to submit a Pre-Repair Authorization (PRA).
18NA0992021-05-03. Service bulletin. EQUIPMENT. This bulletin provides information for use on a Product Assistance Claim (PAC), which is formerly known as a Product Allegation Resolution (PAR) claim.
16NA1092021-05-03. Service bulletin. STEERING. This service bulletin provides a procedure inspecting for excess grease or Sealant on the Exterior of the steering gear due to seeing grease or sealant on certain locations on the gear.
PI1518A2021-04-26. Service bulletin. EQUIPMENT; ELECTRICAL SYSTEM:12V/24V/48V BATTERY. Stop/Start System Malfunction, DTC P1064, P1065, P1068, P106F, P1070, P108D, P108E, or P1091 Set Condition/Concern Some customers may comment that the message “Stop/Start System Disabled” appears on the DIC. There may be a poor ground terminal connection at G400.
PI1489A2021-04-26. Service bulletin. POWER TRAIN:MANUAL TRANSMISSION; ENGINE AND ENGINE COOLING:ENGINE:ENGINE CONTROL MODULE (ECU/ECM). Malfunction Indicator Lamp (MIL) Illuminated, Intermittently Unable to Shift into Reverse, DTC P0502 Set Condition/Concern Some customers may comment on a malfunction indicator lamp (MIL) illuminated. They may also comment that they intermittently are unable to shift into Reverse. When checking the vehicle for DTCs, the engine control module (ECM) may report P0502 as current or in history. This may be caused by water intrusion into the vehicle’s manual transmission output speed sensor or could be induced by the customer slipping the clutch for an extended period of time, as in holding the vehicle on a hill.
PI1187C2021-04-21. Service bulletin. VISIBILITY:REARVIEW MIRRORS/DEVICES; ELECTRICAL SYSTEM:ADAS:DRIVER MONITORING:CAMERA/SENSOR. Information on Inside Rear View Mirror and Camera Loose Some customers may comment that the inside rear view mirror or front camera is loose or that the mirror/camera mounting bracket is loose or has fallen off. If a vehicle is encountered with the above condition, do not attempt to reinstall the bracket onto the windshield. The above listed vehicles have a revised bracket design that is not serviceable. It is necessary to replace the windshield glass assembly. The bracket comes installed on the new glass assembly. Refer to Windshield Replacement in SI.
13-03-10-001C2021-04-20. Service bulletin. TIRES. Information on Tire Cold Weather Cracking
07-08-49-020J2021-04-20. Service bulletin. ELECTRICAL SYSTEM:INSTRUMENT PANEL:SPEEDOMETER/ODOMETER; EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. IPC Odometer Programming Method Quick Reference Guide Season Odometer Programming Methods in Use Today 1. IPC reprogramming and setup using the service programming system (SPS). 2. Odometer setup at the electronic service center (ESC) when using an exchange IPC/DIC. 3. Tech 2® – The Tech 2 is used to set up a replacement BCM, which includes loading the odometer value that is displayed and stored in the IPC. A replacement IPC will display the previously stored vehicle odometer value, communicated from the BCM, after cycling the ignition or driving the vehicle. *The odometer programming is integrated as part of the BCM programming procedure. It is not a stand-alone event.
06-00-89-031D2021-04-20. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION; ENGINE. OEM and Remanufactured Engine and Automatic Transmission/Transaxle Identification
15-NA-0832021-04-20. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM). Recovery Process from a Controller Reprogramming Interruption During service reprogramming of the T87 TCM, some technicians may notice the TCM may fail during the reprogramming event and become unresponsive to the Service Programming System (SPS), unresponsive to the GDS2 tool. This bulletin addresses corrective actions to attempt to recover the module before declaring the TCM as a bad part and replacing. During reprogramming, an interruption can cause the module to lock up. A module reset may recover the TCM
PIP5163E2021-04-19. Service bulletin. FUEL SYSTEM, GASOLINE. This Preliminary Information communication provides information to the technician about engine block of possible cylinder bore damage, scoring or out of round as the possible cause of engine oil consumption, misfire, cylinder leakage or blow by. Technician will need to inspect the engine for Cylinder damage or scoring, An out of round cylinder bore, Dirt intrusion, and Catalytic Converter failure.
PIC5260D2021-04-19. Service bulletin. VISIBILITY:SUN/MOON ROOF ASSEMBLY. This Preliminary Information communication advises the technician the steps on diagnosing the concern. Customer's sunroof operation intermittent, bind, noise, auto-reverse, and/or water leaks.
PIP5540G2021-04-19. Service bulletin. ENGINE AND ENGINE COOLING:ENGINE:OIL/LUBRICATION:PRESSURE/TEMPERATURE SENSOR. This Preliminary information communicates to the technician the need to inspect the induction system for potential icing issues in very cold ambient temperatures. To allow the ice to melt so that it can be drained from the related components. That any of the listed DTC's may set with or without poor engine performance.
PIP5725A2021-04-19. Service bulletin. EQUIPMENT. This Preliminary information communicates the use of Winter grade fuel during the warm months of 2020 and the potential rivability issues that it can cause. The ongoing Coronavirus (COVID-19) pandemic has caused significant reductions in driving and fuel use. Due to the surplus of winter grade fuel sitting in storage (pipelines/stations) the EPA is waiving the fuel vapor requirement. This will extend the use of winter fuel into the summer months. The drivability concerns should not be single events but should be multiple occurrences associated with hot days.
PIP57902021-04-19. Service bulletin. POWER TRAIN; ENGINE AND ENGINE COOLING. This Preliminary information communicates a corrosion, coolant / engine oil contamination concern of the terminals located in the ECM connectors. This document is an aide for technicians to diagnose and locate a resistance concern associated with these terminals. This condition can set various trouble codes and illuminate the MIL, make the engine stall or have a crank no start condition.
PIP5730B2021-04-19. Service bulletin. INTERIOR LIGHTING; ENGINE. This Preliminary information communicates additional diagnostic information for DTC's P0016 and P0018.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.