Service bulletins for the 2024 BMW X6
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
136 on file from NHTSA, as of 2026-10-19.
By type
By component
By topic
Only bulletins with component: Engine are shown. Show all
| B121126 | 2026-09-28. Service bulletin. ENGINE. Potential customer complaints with no fault codes stored / No MIL displayed. 1. “Rough idle after idling for a longer period of time” 2. “Vehicle feels like it is misfiring at idle” The automatic Start/Stop function is deactivated. The vehicle is stopped and the engine runs at idle speed. After prolonged idle operation (approximately 30 to 50 seconds), a slight jolt or slight change in idlespeed may be noticeable. There are no relevant errors in the DME fault code memory. No mixture control error, no misfiring, no error relating to a relevant component of the drive system. Motor vehicles affected: 1. Only MHEVs (mild hybrid electric vehicle) with crankshaft-driven starter generator. 2. Only vehicles with optional equipment 01CE = recuperation system 3. Affected I-levels: I-level 24-07-500 or higher |
|---|---|
| B064426 | 2026-08-28. Other. ENGINE. Air Flap Return |
| B064126 | 2026-08-28. Other. ENGINE. Fan Return |
| B120326 | 2026-07-31. Emissions. ENGINE. Due to an implementation error in various OBD diagnostics in the vehicle's control units, in very rare cases itmay happen that stored fault memory codes (DTCs) and the MIL (warning light) are not automaticallydeleted even though the underlying malfunction has already been rectified. This does not comply with the statutory OBD specifications. |
| B120626 | 2026-06-01. Service campaign. ENGINE. DELIVERY STOP: VARIABLE VALVE TIMING |
| B110425 | 2026-01-23. Service campaign. ENGINE. Due to an assembly error the upper oil pan screws may not have been torqued correctly. |
| B120224 | 2025-11-03. Emissions. ENGINE. RSU availability. VOLUNTARY EMISSIONS RECALL 24E-A02: VALVETRONIC |
| B120725 | 2025-05-31. Service bulletin. ELECTRICAL SYSTEM; ENGINE. A quality check revealed that the DME in these vehicles has a programming error. This results in a deviation of the fuel-air mixture in the internal combustion engine. |
| B110325 | 2025-05-26. Service bulletin. ENGINE. The “Check Engine Oil Level” warning is displayed while driving due to one of the following: Shortly after a detailed measurement has been carried out Shortly after engine oil has been topped up Shortly after an engine oil service has been carried out |
| B120624 | 2025-02-03. Service campaign. ENGINE. BMW AG has decided on a service campaign for certain vehicles from the G0x, G12 and G20 series. Please have the starter motor checked and, if necessary, replaced in the vehicles concerned (according to the vehicle identification number selection) if possible before vehicle delivery. If vehicles have already been delivered, please have the measure carried out the next time the vehicles enter the workshop. A bolting fault on the long bolt screws can cause the magnets in the starter motor to twist. As a result, the power of the starter motor decreases. As a result, the engine does not start. |
| B111024 | 2025-01-25. Service campaign. ENGINE. The engine oil pump mounting screws may not have been tightened with the correct torque. |
| B111024 | 2024-12-31. Service campaign. ENGINE. DELIVERY STOP: OIL PUMP |
| B068324 | 2024-12-03. Other. ENGINE. Wastegate Valve Actuator Return |
| B110824 | 2024-12-02. Service campaign. ENGINE. Delivery Stop Check PCV System |
| B120724 | 2024-09-29. Service campaign. ENGINE; ELECTRICAL SYSTEM. Due to an installation error, the crankshaft sensor connector may not have been properly locked. In very rare cases, the plug connection may become disconnected. If no signal is sent by the crankshaftsensor, the engine will switch to emergency operation and a Check Control message will occur. |
| B110824 | 2024-09-29. Service campaign. ENGINE. Delivery Stop: PCV System |
| B120624 | 2024-09-01. Service campaign. ENGINE. Please have the starter motor checked and, if necessary, replaced in the vehicles concerned (according tothe vehicle identification number selection) if possible before vehicle delivery. If vehicles have already been delivered, please have the measure carried out the next time the vehiclesenter the workshop. A bolting fault on the long bolt screws can cause the magnets in the starter motor to twist. As a result, thepower of the starter motor decreases. As a result, the engine does not start. |
| B110324 | 2024-09-01. Service campaign. ENGINE. Delivery Stop - Oil Pressure Sensor |
| B511219 | 2024-08-02. Service bulletin. ENGINE. A check control message or MIL (Malfunction Indicator Lamp) may be illuminated, with one or more of thefollowing faults stored: 138207 - Active cooling damper control (AKKS), top: blockage at warm ambient temperature 21B043 - Active cooling damper control (AKKS), top: blockage at all ambient temperatures 138222 - Active cooling damper control (AKKS), above: positional deviation error detected at warm ambienttemperature 138209 - Active cooling damper control (AKKS), top: Control deviation at all ambient temperatures 13822B - Active cooling damper control (AKKS), top: Control deviation at all ambient temperatures 21B042 - Active cooling damper control (AKKS), below: blockage at all ambient temperatures 138206 - Active cooling damper control (AKKS), bottom, blockage at warm ambient temperature 138225- Active air-flap control, bottom: top limit position not detected 138224- Active air-flap control, bottom: bottom limit position not detected |
| B120224 | 2024-07-02. Service campaign. ENGINE. VOLUNTARY EMISSIONS RECALL 24E-A02: VALVETRONIC |
| B120424 | 2024-07-01. Service bulletin. ENGINE. Customer perceptions: Vehicles with optional equipment “01CR -Remote Engine Start”. The “Remote Engine Start” selection is missing in the “Pre-conditioning” sub-menu The “Remote Engine Start” can be selected using the vehicle key. However, the “Remote Engine Start” isnot carried out. The Check Control message (number 2055) appears: Remote engine start not available Vehicles with optional equipment “07ME - M Driver’s Package”: The increased maximum speed is not reached Vehicles with optional equipment “01MB - M Drive Professional”: The M MODE “TRACK” is no longer available Only the M MODES “ROAD” and “SPORT” are available Applies to all the customer perceptions: Chance of the error occurring: Very rare, sporadic Both faults listed below are entered in the DME fault memory: 021280 - DME: Certificates (type 1) not ready And 021283 - DME, Secure Feature Activation: Secure Token check still running or unchecked Secure Token present Motor vehicles affected: Vehicles with engine S68T Vehicles with drive unit XB1T |
| B120224B | 2024-05-03. Service bulletin. ENGINE AND ENGINE COOLING. BMW AG has issued a Delivery Stop (effective April 12, 2024) on certain Model Year 2023 - 2025 BMW vehicles that were produced between July 21, 2021, and April 11, 2024. |
| B120224A | 2024-05-03. Service bulletin. ENGINE AND ENGINE COOLING. BMW AG has issued a Delivery Stop (effective April 12, 2024) on certain Model Year 2023 - 2025 BMW vehicles that were produced between July 21, 2021, and April 11, 2024. |
| B120224 | 2024-05-03. Service bulletin. ENGINE AND ENGINE COOLING. BMW AG has issued a Delivery Stop (effective April 12, 2024) on certain Model Year 2023 - 2025 BMW vehicles that were produced between July 21, 2021, and April 11, 2024. |
| B120721 | 2024-04-01. Service bulletin. ENGINE AND ENGINE COOLING. Check Control message (CCM) indicates: (ID 213): Stop, exercising due care. Voltage supply The Service Engine Soon light is on with the following DME Fault Code: 21B209 - Starter alternator / belt for 48V system (OSA_RIEMEN_RISS): Belt betweenCombustion engine and starter generator torn And/or one or more of the following other issues are also occurring: Noise in the area of the belt drive. Odor from the engine compartment. Smoke formation in the area of the belt drive. Drive belt damaged or prematurely worn. Torn drive belt. |
The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.