WenmarOpen by Wenmar Pro

Service bulletins for the 2017 BMW F 800 R

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

269 on file from NHTSA, as of 2026-10-19.

By type

By component

By topic

Only bulletins with component: Backup camera are shown. Show all

Bulletins, newest first
B6504142022-12-12. Service bulletin. LANE DEPARTURE; UNKNOWN OR OTHER; AIR BAGS; SEATS:BARRIERS; BACK OVER PREVENTION. According to the customer, the airbag warning light was on, but it may not be illuminated when the vehicle arrives in the workshop. 1. ACSM fault code "930A60 - Seat occupancy detection, front passenger; malfunction" is stored. The fault may or may not currently be present. Or 2. ACSM fault code "930A1C - Front passenger seat occupancy detection transmitting fault(moisture)" is stored. The fault may or may not currently be present.
B3204202021-12-27. Service bulletin. BACK OVER PREVENTION. A groaning type noise is heard during the height adjustment.
B1212212021-12-27. Service bulletin. BACK OVER PREVENTION. ???Due to an unfavorable operating point primarily in the low-end torque range, the fuel vapor scavenging that takes place in that range may result in incorrect detection of a mixture that is too rich. As a result, an incorrect mixture adaptation value is stored.
B6629192021-04-26. Service bulletin. BACK OVER PREVENTION. TOP VIEW CAMERA IMAGE IS MISALIGNED: The top view image of the vehicle is misaligned when observed in the Control Information Display (CID).
B0901202021-04-26. Service bulletin. BACK OVER PREVENTION:SOFTWARE. BMW REMOTE SOFTWARE UPGRADE IS NOT OFFERED FOR INSTALLATION: The customer complains that the BMW Remote Software Upgrade (RSU) is not possible in his/her vehicle, though the Remote Software Upgrade menu is available in the vehicle and a download was performed by the vehicle or the BMW Connected App.
B6629192020-12-21. Service bulletin. BACK OVER PREVENTION: CAMERA SYSTEM; EQUIPMENT. TOP VIEW CAMERA: The top view image of the vehicle is misaligned when observed in the Control Information Display (CID). When the vehicle is parked in a parking spot with line markings, it is clearly noticed in the CID that the lines are not parallel to the side of the vehicle. This may be noticed on either the driver side, passenger side or both.
B6617202020-12-21. Service bulletin. BACK OVER PREVENTION. SURROUND VIEW - PARKING VIEW IMAGES DISPLAYED INCORRECTLY: After programming and shifting into reverse, there may be various sporadic concerns regarding the rearview camera and the surround view (top view) camera images in the CID (Central Information Display).
B6608202020-11-23. Service bulletin. BACK OVER PREVENTION: SENSING SYSTEM: CAMERA. SERVICE ACTION - REPLACE RIGHT REAR SHORT RANGE RADAR SENSOR (SRR): The functionality of the right rear SRR sensor could be reduced which would display the Driving Assistance Check Control Message.
B3405172020-04-20. Service bulletin. BACK OVER PREVENTION; SERVICE BRAKES, HYDRAULIC; WHEELS; POWER TRAIN. TICKING NOISE WHILE CORNERING WITHOUT THE BRAKES APPLIED: This Service Information Bulletin (Revision 3) replaces SI B34 05 17 dated September 2017. Ticking noise coming from front wheel while cornering without brakes applied noticeable at low speeds. The vehicle must be moving. See attached video V34 01 20 Note: For a similar noise heard when parking with the brakes applied refer to SIB 31 01 12. Microscopic movement of the contact interface between the inner brake disc and the wheel bearing flange on vehicles equipped with lightweight brake discs.
B6608172020-02-18. Service bulletin. BACK OVER PREVENTION; ELECTRICAL SYSTEM:SOFTWARE. REAR VIEW CAMERA FAILS TO DISPLAY IMAGE: This Service Information Bulletin (Revision 5) replaces SI B66 08 17 dated March 2018. Sporadically when the rear view camera is activated no image appears in the display. The rear view camera can be activated by either: 1. Selecting reverse with the shift selector 2. Camera activation via the button on the center console Camera function returns after a terminal change. Note: This error situation can rarely if ever be duplicated on demand. Head-unit interface software start-up synchronization error for the rear view camera.
B6617172018-05-14. Service bulletin. BACK OVER PREVENTION: SENSING SYSTEM: CAMERA. MISSING DISPLAY OF SURROUND VIEW CAMERA: Central Information Display (CID) sporadically does not display Surround View Camera image.
B6608172018-05-14. Service bulletin. BACK OVER PREVENTION. REAR VIEW CAMERA FAILS TO DISPLAY IMAGE: Sporadically, when the rear view camera is activated, either via selecting reverse with the shift selector or by direct camera selection, no image appears in the display.
B6613172018-04-23. Service bulletin. BACK OVER PREVENTION. SURROUND VIEW CAMERA DISPLAYS INCORRECT VEHICLE MODEL: After programming the vehicle, the incorrect vehicle model is displayed in the CID (Central Information Display) when surround view camera function is active.
B6607182018-04-23. Service bulletin. BACK OVER PREVENTION: SENSING SYSTEM: CAMERA. GREEN BARS DISPLAYED IN CENTRAL INFORMATION DISPLAY WHEN CAMERA ACTIVE: Wide green bar across bottom and up right side of Central Information Display (CID) when reverse gear is selected and the Surround View camera is active.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.