Service bulletin B661717
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
| Type | Service bulletin |
|---|---|
| NHTSA id | 10136742 |
| Published by NHTSA | 2018-05-14 |
| Manufacturer's number | B661717 |
| Manufacturer's date | 2017-12-01 |
| NHTSA component | BACK OVER PREVENTION: SENSING SYSTEM: CAMERA |
NHTSA's summary
MISSING DISPLAY OF SURROUND VIEW CAMERA: Central Information Display (CID) sporadically does not display Surround View Camera image.
The document
The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.
Components
Driver assistance, Backup camera
| BMW 5-SERIES GRAN TURISMO | 2017 |
|---|---|
| BMW 530I | 2017 |
| BMW 540I | 2017 |
| BMW 740LI | 2016 to 2017 |
| BMW 750LI | 2016 to 2017 |
| BMW F800 R | 2017 |
| BMW M760LI | 2017 |
| BMW X3 | 2017 |
Listing a model year does not mean every vehicle of it is concerned: the document says which.
| B650414 | 2022-12-12. Service bulletin. According to the customer, the airbag warning light was on, but it may not be illuminated when the vehicle arrives in the workshop. 1. ACSM fault code "930A60 - Seat occupancy detection, front passenger; malfunction" is stored. The fault may or may not currently be present. Or 2. ACSM fault code "930A1C - Front passenger seat occupancy detection transmitting fault(moisture)" is stored. The fault may or may not currently be present. |
|---|---|
| B090321 | 2022-06-21. Service bulletin. In some rare cases a customer vehicle might be excluded from one or more Remote Software Upgrade(RSU) campaigns. This SIB gives an overview how to identify these vehicles and how to proceed in case of a customer complaint. |
| B320420 | 2021-12-27. Service bulletin. A groaning type noise is heard during the height adjustment. |
| B121221 | 2021-12-27. Service bulletin. ???Due to an unfavorable operating point primarily in the low-end torque range, the fuel vapor scavenging that takes place in that range may result in incorrect detection of a mixture that is too rich. As a result, an incorrect mixture adaptation value is stored. |
| B662919 | 2021-04-26. Service bulletin. TOP VIEW CAMERA IMAGE IS MISALIGNED: The top view image of the vehicle is misaligned when observed in the Control Information Display (CID). |
| B090120 | 2021-04-26. Service bulletin. BMW REMOTE SOFTWARE UPGRADE IS NOT OFFERED FOR INSTALLATION: The customer complains that the BMW Remote Software Upgrade (RSU) is not possible in his/her vehicle, though the Remote Software Upgrade menu is available in the vehicle and a download was performed by the vehicle or the BMW Connected App. |
| B662919 | 2020-12-21. Service bulletin. TOP VIEW CAMERA: The top view image of the vehicle is misaligned when observed in the Control Information Display (CID). When the vehicle is parked in a parking spot with line markings, it is clearly noticed in the CID that the lines are not parallel to the side of the vehicle. This may be noticed on either the driver side, passenger side or both. |
| B661720 | 2020-12-21. Service bulletin. SURROUND VIEW - PARKING VIEW IMAGES DISPLAYED INCORRECTLY: After programming and shifting into reverse, there may be various sporadic concerns regarding the rearview camera and the surround view (top view) camera images in the CID (Central Information Display). |
| B660820 | 2020-11-23. Service bulletin. SERVICE ACTION - REPLACE RIGHT REAR SHORT RANGE RADAR SENSOR (SRR): The functionality of the right rear SRR sensor could be reduced which would display the Driving Assistance Check Control Message. |
| B660817 | 2020-04-27. Service bulletin. REAR VIEW CAMERA FAILS TO DISPLAY IMAGE: This Service Information Bulletin (Revision 6) replaces SI B66 08 17 dated January 2020. Sporadically when the rear view camera is activated no image appears in the display. The rear view camera can be activated by either: 1. Selecting reverse with the shift selector 2. Camera activation via the button on the center console Camera function returns after a terminal change. |