Service bulletin SA-038-26c
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
| Type | Service bulletin |
|---|---|
| NHTSA id | 11039110 |
| Published by NHTSA | 2026-11-04 |
| Manufacturer's number | SA-038-26c |
| Manufacturer's date | 2026-10-20 |
| NHTSA component | UNKNOWN OR OTHER; ELECTRICAL SYSTEM |
| Manufacturer's system | Infotainment Center Display |
NHTSA's summary
Some customers may complain about any of the following 1. Infotainment Center Display does not provide the Authorization Code (OTP) during the MyMazda App Connected Vehicle enrollment. 2. Remote function(s) inoperative.
The document
The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.
Components
Electrical system
| MAZDA CX-30 | 2020, 2021, 2022, 2023, 2024, 2025, 2026, 2027 |
|---|---|
| MAZDA CX-5 | 2021, 2022, 2023, 2024, 2025, 2026, 2027 |
| MAZDA CX-50 | 2023, 2024, 2025, 2026, 2027 |
| MAZDA CX-50 HYBRID | 2025, 2026, 2027 (the catalog's model; the bulletin names a series or trim of it) |
| MAZDA CX-70 | 2025, 2026 |
| MAZDA CX-70 PLUG-IN HYBRID | 2025, 2026 (the catalog's model; the bulletin names a series or trim of it) |
| MAZDA CX-9 | 2021, 2022, 2023 |
| MAZDA CX-90 | 2024, 2025, 2026, 2027 |
| MAZDA CX-90 PLUG-IN HYBRID | 2024, 2025, 2026, 2027 (the catalog's model; the bulletin names a series or trim of it) |
| MAZDA MAZDA2 | 2021 |
| MAZDA MAZDA3 | 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026, 2027 |
| MAZDA MX-30 | 2022, 2023 |
| MAZDA MX-5 | 2024, 2025, 2026, 2027 |
Listing a model year does not mean every vehicle of it is concerned: the document says which.
| 25V568000 | 2025-09-02. ELECTRICAL SYSTEM:INSTRUMENT PANEL:FUEL GAUGE:FUEL LEVEL FLOAT/SENSOR/SENDING UNIT; ELECTRICAL SYSTEM:BODY CONTROL MODULE:SOFTWARE |
|---|---|
| 25V418000 | 2025-06-18. ENGINE AND ENGINE COOLING:ENGINE:ENGINE CONTROL MODULE (ECU/ECM); ELECTRICAL SYSTEM:PROPULSION SYSTEM:HYBRID MANAGEMENT:POWER CONTROL UNIT/MODULE (HPCU):SOFTWARE |
| 2024659 | 2024-10-31. Electrical |
| 24V817000 | 2024-10-31. ELECTRICAL SYSTEM:PROPULSION SYSTEM:INVERTER; ELECTRICAL SYSTEM:SOFTWARE |
| 24V816000 | 2024-10-31. POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM); ELECTRICAL SYSTEM:PROPULSION SYSTEM:TRACTION BATTERY:MANAGEMENT SYSTEM/ENERGY CONTROL MODULE (BMS/BECM):SOFTWARE |
| 24V814000 | 2024-10-31. STRUCTURE:INTERIOR PANELS:DASHBOARD; ELECTRICAL SYSTEM:SOFTWARE |
| 19V363000 | 2019-05-14. ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL; SEAT BELTS:FRONT:WARNING LIGHT/DEVICES |
A recall listed here may apply to some of the same vehicles. Only the manufacturer can say whether it applies to one vehicle.
| Dlr Claim Resp | 2026-11-04. Service campaign. Subject: Update – Campaign Warranty Claim Response Enhancements – Modules Not Repaired for Certain Campaigns Dear Mazda Dealer Colleagues, On October 28, 2026, a change was implemented in the warranty claim response screen to provide precise information for all campaigns requiring module programming or module replacement subject to the LECS system software checks. As previously announced, some claims were automatically rejected with the Edit code JN1 – One or More Modules Are Not Updated when submitting a campaign warranty claim. This response was based on the session file received from MDARS or MDARS II at the dealership and the VIN on the claim submitted. This change provides additional Related Information which enhances the edit code information. This information allows the dealer to correct the error without contacting Warranty or Hotline. Edit code JN1 now contains the actual module name and the software version that was collected from the car and what the minimum required software needed to be for the claim. Using this information, the technician can now identify the exact error or errors and correct the concern. |
|---|---|
| SSPE2 Owner Ltr a | 2026-11-04. Over-the-air update. Subject: Announcement of Special Service Program (SSPE2) Ethernet Communication – Over The Air (OTA) Update Concerns and Manufacturer Service Program (MSP67 ) – Battery Depletion - 2026MY CX-5 vehicles URGENT - STOP DELIVERY OF AFFECTED VEHICLES: MAZDA SALES AND SERVICE TEAMS - ACTION ITEM: Between both campaigns there are approximately 27,565 vehicles (for both campaigns) in stock at U.S. Mazda dealers. All Mazda dealers must quarantine any affected New, Used or Certified Pre-Owned in-stock vehicles until the repair is completed. The affected dealer inventory list will be available to each District Service Manager with the notification of this dealer email. Once completed, the vehicle can be delivered, and the Warranty claim can be submitted later without penalty since the vehicle has been repaired. Mazda Motor Corporation has decided to conduct two service programs Special Service Program (SSP) and Manufacturer Service Program (MSP) on certain 2026MY CX -5 vehicles sold in the U.S. and U.S. Territories. Vehicles also produced by Mazda Motor de Mexico (MMdM) and Mazda Canada Inc. (MCI) are affected and should be repaired if presented to your dealership. Please see the description, model, model year, and VIN ranges below for all vehicles in these two campaigns. There are 70,225 vehicles affected by SSPE2 and 53,653 vehicles affected by MSP67. All vehicles in MSP67 are also affected by campaign SSPE2. Please read this complete letter for all the repair information . Special Service Program SSPE2 – Ethernet Communication and OTA Update Concerns - SSPE2 addresses two concerns: 1) Ethernet communication (CDC -DCM communication) concern: Communication in the Cockpit Domain Controller (CDC) and Data Communication Module (DCM), may be interrupted, making the connected services unavailable. The interruption may cause the master warning light to illuminate and audible warning from the emergency call speaker. 2) OTA software update concern: Due to an improper communication control program in the CDC and DCM, may prevent OTA software updates to be completed. In addition, if an OTA software update is successfully completed, the vehicle's software configuration status may not be correctly transmitted to the server, which may prevent notification of subsequent software update successfully completed OTA software updates may not properly sync with Mazda’s servers potentially preventing future OTA updates. Repair Outline: Reprogram the DCM and CDC software, using a USB memory stick with modified software. Manufacturer Service Program MSP67 - Battery Depletion Concern - MSP67 addresses two concerns: On certain subject CX-5 vehicles, the vehicle may fail to start due to battery depletion after IG OFF. 1) Data Communication Module (DCM): Remote Diagnostics software may reset and fail to close a CAN communication channel after ignition OFF and the battery may drain over time. Note: Vehicles for Puerto Rico and Mexico markets are not affected by this factor as they are not equipped with the DCM. 2) Body Control Module (BCM): The Body Control Module (BCM) may intermittently reset during sleep mode operation. Vehicles may cycle between wake-up and sleep states, leading to battery depletion. Repair Outline: Reprogram the BCM software with M-MDS, using Mazda Diagnostic and Repair Software II (MDARS II). The DCM software is being re-programed by SSPE2. Note: When the BCM is reprogrammed, the Central Gateway (CGW) will also be updated automatically. |
| SSPE2_MSP67 Repair a | 2026-11-04. Over-the-air update. Subject: Announcement of Special Service Program (SSPE2) Ethernet Communication – Over The Air (OTA) Update Concerns and Manufacturer Service Program (MSP67 ) – Battery Depletion - 2026MY CX-5 vehicles URGENT - STOP DELIVERY OF AFFECTED VEHICLES: MAZDA SALES AND SERVICE TEAMS - ACTION ITEM: Between both campaigns there are approximately 27,565 vehicles (for both campaigns) in stock at U.S. Mazda dealers. All Mazda dealers must quarantine any affected New, Used or Certified Pre-Owned in-stock vehicles until the repair is completed. The affected dealer inventory list will be available to each District Service Manager with the notification of this dealer email. Once completed, the vehicle can be delivered, and the Warranty claim can be submitted later without penalty since the vehicle has been repaired. Mazda Motor Corporation has decided to conduct two service programs Special Service Program (SSP) and Manufacturer Service Program (MSP) on certain 2026MY CX -5 vehicles sold in the U.S. and U.S. Territories. Vehicles also produced by Mazda Motor de Mexico (MMdM) and Mazda Canada Inc. (MCI) are affected and should be repaired if presented to your dealership. Please see the description, model, model year, and VIN ranges below for all vehicles in these two campaigns. There are 70,225 vehicles affected by SSPE2 and 53,653 vehicles affected by MSP67. All vehicles in MSP67 are also affected by campaign SSPE2. Please read this complete letter for all the repair information . Special Service Program SSPE2 – Ethernet Communication and OTA Update Concerns - SSPE2 addresses two concerns: 1) Ethernet communication (CDC -DCM communication) concern: Communication in the Cockpit Domain Controller (CDC) and Data Communication Module (DCM), may be interrupted, making the connected services unavailable. The interruption may cause the master warning light to illuminate and audible warning from the emergency call speaker. 2) OTA software update concern: Due to an improper communication control program in the CDC and DCM, may prevent OTA software updates to be completed. In addition, if an OTA software update is successfully completed, the vehicle's software configuration status may not be correctly transmitted to the server, which may prevent notification of subsequent software update successfully completed OTA software updates may not properly sync with Mazda’s servers potentially preventing future OTA updates. Repair Outline: Reprogram the DCM and CDC software, using a USB memory stick with modified software. Manufacturer Service Program MSP67 - Battery Depletion Concern - MSP67 addresses two concerns: On certain subject CX-5 vehicles, the vehicle may fail to start due to battery depletion after IG OFF. 1) Data Communication Module (DCM): Remote Diagnostics software may reset and fail to close a CAN communication channel after ignition OFF and the battery may drain over time. Note: Vehicles for Puerto Rico and Mexico markets are not affected by this factor as they are not equipped with the DCM. 2) Body Control Module (BCM): The Body Control Module (BCM) may intermittently reset during sleep mode operation. Vehicles may cycle between wake-up and sleep states, leading to battery depletion. Repair Outline: Reprogram the BCM software with M-MDS, using Mazda Diagnostic and Repair Software II (MDARS II). The DCM software is being re-programed by SSPE2. Note: When the BCM is reprogrammed, the Central Gateway (CGW) will also be updated automatically. |
| SSPE2_MSP67 Warr f | 2026-11-04. Over-the-air update. Subject: Announcement of Special Service Program (SSPE2) Ethernet Communication – Over The Air (OTA) Update Concerns and Manufacturer Service Program (MSP67 ) – Battery Depletion - 2026MY CX-5 vehicles URGENT - STOP DELIVERY OF AFFECTED VEHICLES: MAZDA SALES AND SERVICE TEAMS - ACTION ITEM: Between both campaigns there are approximately 27,565 vehicles (for both campaigns) in stock at U.S. Mazda dealers. All Mazda dealers must quarantine any affected New, Used or Certified Pre-Owned in-stock vehicles until the repair is completed. The affected dealer inventory list will be available to each District Service Manager with the notification of this dealer email. Once completed, the vehicle can be delivered, and the Warranty claim can be submitted later without penalty since the vehicle has been repaired. Mazda Motor Corporation has decided to conduct two service programs Special Service Program (SSP) and Manufacturer Service Program (MSP) on certain 2026MY CX -5 vehicles sold in the U.S. and U.S. Territories. Vehicles also produced by Mazda Motor de Mexico (MMdM) and Mazda Canada Inc. (MCI) are affected and should be repaired if presented to your dealership. Please see the description, model, model year, and VIN ranges below for all vehicles in these two campaigns. There are 70,225 vehicles affected by SSPE2 and 53,653 vehicles affected by MSP67. All vehicles in MSP67 are also affected by campaign SSPE2. Please read this complete letter for all the repair information . Special Service Program SSPE2 – Ethernet Communication and OTA Update Concerns - SSPE2 addresses two concerns: 1) Ethernet communication (CDC -DCM communication) concern: Communication in the Cockpit Domain Controller (CDC) and Data Communication Module (DCM), may be interrupted, making the connected services unavailable. The interruption may cause the master warning light to illuminate and audible warning from the emergency call speaker. 2) OTA software update concern: Due to an improper communication control program in the CDC and DCM, may prevent OTA software updates to be completed. In addition, if an OTA software update is successfully completed, the vehicle's software configuration status may not be correctly transmitted to the server, which may prevent notification of subsequent software update successfully completed OTA software updates may not properly sync with Mazda’s servers potentially preventing future OTA updates. Repair Outline: Reprogram the DCM and CDC software, using a USB memory stick with modified software. Manufacturer Service Program MSP67 - Battery Depletion Concern - MSP67 addresses two concerns: On certain subject CX-5 vehicles, the vehicle may fail to start due to battery depletion after IG OFF. 1) Data Communication Module (DCM): Remote Diagnostics software may reset and fail to close a CAN communication channel after ignition OFF and the battery may drain over time. Note: Vehicles for Puerto Rico and Mexico markets are not affected by this factor as they are not equipped with the DCM. 2) Body Control Module (BCM): The Body Control Module (BCM) may intermittently reset during sleep mode operation. Vehicles may cycle between wake-up and sleep states, leading to battery depletion. Repair Outline: Reprogram the BCM software with M-MDS, using Mazda Diagnostic and Repair Software II (MDARS II). The DCM software is being re-programed by SSPE2. Note: When the BCM is reprogrammed, the Central Gateway (CGW) will also be updated automatically. |
| SSPE2_MSP67 Warr e | 2026-11-04. Over-the-air update. Subject: Announcement of Special Service Program (SSPE2) Ethernet Communication – Over The Air (OTA) Update Concerns and Manufacturer Service Program (MSP67 ) – Battery Depletion - 2026MY CX-5 vehicles URGENT - STOP DELIVERY OF AFFECTED VEHICLES: MAZDA SALES AND SERVICE TEAMS - ACTION ITEM: Between both campaigns there are approximately 27,565 vehicles (for both campaigns) in stock at U.S. Mazda dealers. All Mazda dealers must quarantine any affected New, Used or Certified Pre-Owned in-stock vehicles until the repair is completed. The affected dealer inventory list will be available to each District Service Manager with the notification of this dealer email. Once completed, the vehicle can be delivered, and the Warranty claim can be submitted later without penalty since the vehicle has been repaired. Mazda Motor Corporation has decided to conduct two service programs Special Service Program (SSP) and Manufacturer Service Program (MSP) on certain 2026MY CX -5 vehicles sold in the U.S. and U.S. Territories. Vehicles also produced by Mazda Motor de Mexico (MMdM) and Mazda Canada Inc. (MCI) are affected and should be repaired if presented to your dealership. Please see the description, model, model year, and VIN ranges below for all vehicles in these two campaigns. There are 70,225 vehicles affected by SSPE2 and 53,653 vehicles affected by MSP67. All vehicles in MSP67 are also affected by campaign SSPE2. Please read this complete letter for all the repair information . Special Service Program SSPE2 – Ethernet Communication and OTA Update Concerns - SSPE2 addresses two concerns: 1) Ethernet communication (CDC -DCM communication) concern: Communication in the Cockpit Domain Controller (CDC) and Data Communication Module (DCM), may be interrupted, making the connected services unavailable. The interruption may cause the master warning light to illuminate and audible warning from the emergency call speaker. 2) OTA software update concern: Due to an improper communication control program in the CDC and DCM, may prevent OTA software updates to be completed. In addition, if an OTA software update is successfully completed, the vehicle's software configuration status may not be correctly transmitted to the server, which may prevent notification of subsequent software update successfully completed OTA software updates may not properly sync with Mazda’s servers potentially preventing future OTA updates. Repair Outline: Reprogram the DCM and CDC software, using a USB memory stick with modified software. Manufacturer Service Program MSP67 - Battery Depletion Concern - MSP67 addresses two concerns: On certain subject CX-5 vehicles, the vehicle may fail to start due to battery depletion after IG OFF. 1) Data Communication Module (DCM): Remote Diagnostics software may reset and fail to close a CAN communication channel after ignition OFF and the battery may drain over time. Note: Vehicles for Puerto Rico and Mexico markets are not affected by this factor as they are not equipped with the DCM. 2) Body Control Module (BCM): The Body Control Module (BCM) may intermittently reset during sleep mode operation. Vehicles may cycle between wake-up and sleep states, leading to battery depletion. Repair Outline: Reprogram the BCM software with M-MDS, using Mazda Diagnostic and Repair Software II (MDARS II). The DCM software is being re-programed by SSPE2. Note: When the BCM is reprogrammed, the Central Gateway (CGW) will also be updated automatically. |
| SSPE2_MSP67 Warr d | 2026-11-04. Over-the-air update. Subject: Announcement of Special Service Program (SSPE2) Ethernet Communication – Over The Air (OTA) Update Concerns and Manufacturer Service Program (MSP67 ) – Battery Depletion - 2026MY CX-5 vehicles URGENT - STOP DELIVERY OF AFFECTED VEHICLES: MAZDA SALES AND SERVICE TEAMS - ACTION ITEM: Between both campaigns there are approximately 27,565 vehicles (for both campaigns) in stock at U.S. Mazda dealers. All Mazda dealers must quarantine any affected New, Used or Certified Pre-Owned in-stock vehicles until the repair is completed. The affected dealer inventory list will be available to each District Service Manager with the notification of this dealer email. Once completed, the vehicle can be delivered, and the Warranty claim can be submitted later without penalty since the vehicle has been repaired. Mazda Motor Corporation has decided to conduct two service programs Special Service Program (SSP) and Manufacturer Service Program (MSP) on certain 2026MY CX -5 vehicles sold in the U.S. and U.S. Territories. Vehicles also produced by Mazda Motor de Mexico (MMdM) and Mazda Canada Inc. (MCI) are affected and should be repaired if presented to your dealership. Please see the description, model, model year, and VIN ranges below for all vehicles in these two campaigns. There are 70,225 vehicles affected by SSPE2 and 53,653 vehicles affected by MSP67. All vehicles in MSP67 are also affected by campaign SSPE2. Please read this complete letter for all the repair information . Special Service Program SSPE2 – Ethernet Communication and OTA Update Concerns - SSPE2 addresses two concerns: 1) Ethernet communication (CDC -DCM communication) concern: Communication in the Cockpit Domain Controller (CDC) and Data Communication Module (DCM), may be interrupted, making the connected services unavailable. The interruption may cause the master warning light to illuminate and audible warning from the emergency call speaker. 2) OTA software update concern: Due to an improper communication control program in the CDC and DCM, may prevent OTA software updates to be completed. In addition, if an OTA software update is successfully completed, the vehicle's software configuration status may not be correctly transmitted to the server, which may prevent notification of subsequent software update successfully completed OTA software updates may not properly sync with Mazda’s servers potentially preventing future OTA updates. Repair Outline: Reprogram the DCM and CDC software, using a USB memory stick with modified software. Manufacturer Service Program MSP67 - Battery Depletion Concern - MSP67 addresses two concerns: On certain subject CX-5 vehicles, the vehicle may fail to start due to battery depletion after IG OFF. 1) Data Communication Module (DCM): Remote Diagnostics software may reset and fail to close a CAN communication channel after ignition OFF and the battery may drain over time. Note: Vehicles for Puerto Rico and Mexico markets are not affected by this factor as they are not equipped with the DCM. 2) Body Control Module (BCM): The Body Control Module (BCM) may intermittently reset during sleep mode operation. Vehicles may cycle between wake-up and sleep states, leading to battery depletion. Repair Outline: Reprogram the BCM software with M-MDS, using Mazda Diagnostic and Repair Software II (MDARS II). The DCM software is being re-programed by SSPE2. Note: When the BCM is reprogrammed, the Central Gateway (CGW) will also be updated automatically. |
| SA-062-26 | 2026-11-04. Service bulletin. DESCRIPTION Customers having MAZDA CONNECT 3 concerns should have their vehicle repaired using the following information in the Repair Procedure. |
| 09-030-26 | 2026-11-04. Service bulletin. For vehicles equipped with the Accessory Tow Brake Controller (P/N: C9N1V7782A), the 12V battery may become discharged due to high parasitic current if the vehicle is left unused for an extended period, regardless of whether a trailer is connected or not. This may be caused by power supply to the controller continuing after the ignition is turned OFF due to inadequate software in the Tow Brake Controller. 5. Replace the accessory with the improved part (suffix "B"), and verify that the parasitic current is 65 mA or less. NOTE: For accessory installation procedures, refer to INSTALLATION INSTRUCTIONS in attached. |
| 09-028-26 | 2026-11-03. Service bulletin. This bulletin supersedes the previously issued bulletin(s) listed below. The changes are noted below in Red. 09-038/24 08/08/24 NOTE: This service information is NOT applicable to 7th generation Mazda vehicles because the odometer data is stored in the BCM. DESCRIPTION In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer’s responsibility to comply with Federal, State, and local laws concerning odometer and related documentation requirements when providing a repair or replacement. Mazda vehicles are manufactured with tamper-proof speedometers. |
| SA-042-26a | 2026-10-03. Service bulletin. Mazda Connected Services - Frequently Asked Questions (FAQ) This Service Alert supersedes the previously issued SAs listed below. The changes are noted in Red text. SA-042/26 06/30/26 DESCRIPTION Frequently Asked Questions (FAQ) Index General Questions MAZDA CONNECT Indication Setup and Getting Started Dealer Processes Registration / Enrollment / Take-Over Customer Subscription Status WI-FI General Informatio Opening the TCU Communication Line WI-FI How-To Conditions for Remote Engine Start Will Not Function WI-FI Trial Period Conditions for Remote Engine Start Function Will turn engine OFF Interacting With The App TCU Communication Line Status Service Issues Educational Videos Troubleshooting Resources MyMazda App Error Codes Customer Opt-Out |