WenmarOpen by Wenmar Pro

Service bulletin 300122

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

The communication, as NHTSA indexes it (as of 2026-10-19)
TypeService bulletin
NHTSA id10222971
Published by NHTSA2022-10-17
Manufacturer's number300122
Manufacturer's date2022-01-25
NHTSA componentWHEELS

NHTSA's summary

Charger Pursuit All Wheel Drive (AWD) Front Halfshafts

The document

The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.

Components

Wheels

Vehicles listed
DODGE CHARGER2014, 2015, 2016, 2017, 2018, 2019, 2020

Listing a model year does not mean every vehicle of it is concerned: the document says which.

Recalls for the same vehicles and component
19V7580002019-10-24. SERVICE BRAKES; WHEELS; TIRES

A recall listed here may apply to some of the same vehicles. Only the manufacturer can say whether it applies to one vehicle.

Other bulletins for the same vehicles and component
08-008-232023-02-13. Service bulletin. UAS and UCS Radio Enhancements Customers may experience one or more of the following: **Wi-Fi hotspot connection failure. Speaker popping, crackle noise during Voice Recognition (VR) response and navigation guidance. Mobile Station Integrated Services Digital Network (MSISDN) missing from radio, no connected services working.** Wireless connectivity pairing and/or connection issues. Lost radio presets. Radio channels change by itself. SXMT icon inoperative. SXMT favorite song not displaying/playing. High pitch squeal, pop or hum noise from speakers. Anti-theft code request message. Lines appear across screen. Radio will not switch modes between AM, FM, SAT or Media. Performance control home screen shows ?Norm? mode for engine/transmission even when the vehicle is in ?Drag? mode (LA, LD, LX only). Can not change the time on the clock (LA, LD and LX only). USB hub inoperable (D-Trucks only). Backup camera gridlines missing (D-Trucks only). Device not supported message (D-Trucks only). Remote app inoperative (D-Trucks only). Unable to adjust volume (D-Trucks only). Heated steering wheel inoperable (D-Trucks only). In addition, the following enhancement are included in this update: CarplayT connectivity improvements. Improvement to wireless connectivity phone pairing. Improved sound quality when using a wireless connectivity phone. **This bulletin involves inspecting and if required, updating the radio software level to 40.1. Depending on the radio?s current software level the radio may need a one or two USB update.**
08-233-222023-01-17. Service bulletin. UDQ Radio Enhancements This bulletin involves inspecting and if required, updating the radio to software: 16.11. Customers may experience one or more of the following: Vehicle Finder feature on Sirius® Guardian inop. Excessive weather alerts. Radio freezes and resets after start-up. Navigation will not load when selected on the radio screen. Rear view camera does not display on the screen (unless the screen is blue which indicates a poor camera connection). Applications not launching from the app screen. USB port will not play music from a USB flash drive. Inaccurate location of the vehicle on the navigation map. Paired phones will not connect via wireless connectively. Radio screen will not dim with the thumb wheel when adjusting the cluster brightness. Map screen does not return after rear view camera clears. Performance Control&Performance Page app not performing as expected. Wireless connectively phone call audio too low (requires volume levels above 30 to be audible). Song information on radio screen doesn?t match the song playing. Navigation GPS says not available. Surround sound state not shown correctly. Responding to the Favorites notification does not go to that song. Compass not showing up. No sound or navigation when the radio is in customer mode. No SXM (Sirius XM) audio for channels 301 and above.
05154262A2022-12-19. Service bulletin. Hub & Bearing Assy - Front For LA, LD SRT vehicles with the 2-piece front brake rotor (BR7 sales code), do NOT replace the front Hub & Bearing Assy for a clicking noise occurring while turning during low speed parking lot maneuvers. Instead, remove front wheels and rotors and clean mating surfaces (wheel mounting face, rotor mounting faces (both sides), and hub face) with a Scotch Brite Pad or equivalent, and re-assemble.
90034182022-10-24. Service bulletin. Rotor - Front 2 Piece For LA, LD SRT vehicles with the 2-piece Front Rotor (BR7 sales code), do NOT replace the rotor for a clicking noise occurring while turning at low parking lot speeds. Instead, remove front wheels and rotors and clean mating surfaces (wheel mounting face, rotor mounting faces (both sides), and hub mounting face) with a Scotch Brite Pad or equivalent, and reassemble. When installing wheel, MUST use clicker/torque wrench, set to 110 ft-lb (150 Nm).
2100314REVA2022-09-26. Service bulletin. Flash: 845RE Transmission Shift Enhancements, 2-1 Downshift This bulletin involves reprogramming the Transmission Control Module (TCM) with the latest available software. The following TCM calibration improvements are available for vehicles equipped an 845RE Automatic Transmission (Sales Code DFL). These updates are listed by vehicle and engine.LD and LX vehicles equipped with a 3.6L engine (Sales Code ERB) Software to correct a harsh bump feel during a 2-1 downshift. Software to enable the scan tool based transmission ?Quick Learn.? Software to address customer concerns of Malfunction Indicator Lamp (MIL) illumination and Diagnostic Trouble Code (DTC) P215C Output Shaft Speed, Wheel Speed Correlation setting on AWD equipped vehicles.LX and WK vehicles equipped with a 3.0L engine (Sales Code EHD) Software to correct a harsh bump feel during a 2-1 downshift.WK vehicles equipped with a 3.6L engine (Sales Code ERB) Software to correct a harsh bump feel during a 2-1 downshift.DS vehicles equipped with 3.6L engine (Sales Code ERB)
21031142022-09-26. Service bulletin. Flash: Quick Learn Enable And P215C Output Shaft Speed, Wheel Speed Correlation Set While Braking This bulletin involves selectively erasing and reprogramming the Transmission Control Module (TCM) with new software. The following Transmission Control Module (TCM) calibration update is being released to enable the new wiTECH based ?Quick Learn? procedure to be performed anytime the transmission adaptation memory cells are cleared or addressing customer concerns of poor shift quality. It also addresses customer concerns of Malfunction Indicator Lamp (MIL) illumination and Diagnostic Trouble Code (DTC) P215C Output Shaft Speed, Wheel Speed Correlation setting on AWD equipped vehicles.
05004152022-09-26. Service bulletin. Incorrectly installed front wheel speed sensor wire.
05-004-212022-08-22. Service bulletin. Front Click Noise at Low Speed Turns This bulletin involves installing a friction disc kit on both front hub bearings and rotors. The customer may comment on the following:When making a sharp turn at low speed (parking lot) maneuvers, a click noise is heard. Most of the time the noise can be heard if the windows are open.
02-007-142022-08-22. Service bulletin. Front End Clunk Noise When Coming To A Stop - Police Vehicles Only This bulletin involves replacing the left side or the right side or both side tension struts. Police vehicles with heavy duty suspension and rear wheel drive may experience a front end clunk noise, coming from the tension strut bushing(s), while coming to a stop.
08016162022-08-22. Service bulletin. This bulletin involves updating the Comfort Seat and Wheel Module (CSWM) software for