WenmarOpen by Wenmar Pro

Service bulletin IB08-X-002

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

The communication, as NHTSA indexes it (as of 2026-10-19)
TypeService bulletin
NHTSA id10178754
Published by NHTSA2020-08-24
Manufacturer's numberIB08-X-002
Manufacturer's date2020-07-22
NHTSA componentEQUIPMENT:OTHER:LABELS; FUEL SYSTEM, DIESEL; EQUIPMENT

NHTSA's summary

ISUZU DIESEL ENGINES AVAILABLE IN THE ABOVE AFFECTED VEHICLES MEET THE CALIFORNIA AIR RESOURCE BOARD'S (CARB) OPTIONAL IDLING EMISSIONS STANDARD OF 30 GRAMS PER HOUR OF OXIDES OF NITROGEN (NOX) WITH NO INCREASE IN THE EMISSION OF OTHER REGULATED POLLUTANTS. AS A RESULT THESE VEHICLES HAVE BEEN APPROVED AS "CERTIFIED CLEAN IDLE" AND ARE "EXEMPT" FROM THE ENGINE SHUTDOWN SYSTEM (ESS) REQUIREMNET PURSUANT OT SECTION 1956.8 OF TITLE 13, CALIFORNIA CODE OF REGULATIONS. AS REQUIRED BY THE ESS REGULATION, FOR "CERTIFICED CLEAN IDLE" VEHICLES, ISUZU HAS INTRODUCED A TAMPER RESISTANCE "CERTIFIED CLEAN IDLE" LABEL LOCATED ON THE DRIVER'S SIDE DOOR PANEL. IT IS IMPORTANT THAT THIS LABEL REMAIN, PERMANENTLY, ON THE VEHICLE TO IDENTIFY IT AS "CERTIFIED CLEAN IDLE." CARB REQUIRES THIS LABEL AS EVIDENCE THAT, AT HTE TIME OF MANUFACTURE, THE ENGINE INSTALLED MET THE APPLICABLE EMISSION STANDARDS. SHOULD THE LABEL BE FOUND MISSING OR DAMGED DURING AN INSPECTION, A CITATION AND PENALTIES MAY BE ISSUED. IF THE VEHICLE IS OPERATED IN CALIFORNIA WITH A DAMAGED OR MISSING CLEAN IDLE LABEL, ISUZU RECOMMENDS VEHICLE OPERATORS FOLLOW THE 5 MINUTE ESS REQUIREMENT BY MANUALLY TURNING OFF THE ENGINE. FOLLOWING THIS ESS REQUIREMNET WILL KEEP THE VEHICLE OPERATION COMPLIANT UNTIL A REPLACEMENT LABEL CAN BE INSTALLED. "CLEAN AIR IDLE" LABELS ARE PRINTED WITH A SERIAL NUMBER AND REGISTERED TO AN INDIVIDUAL VIN. AS A RESULT, A REPLACEMNET LABEL WILL ALSO INCLUDE A NEW SERIAL NUMBER WHICH MUST BE REGISTERED TO THE VEHICLE'S VIN BY THE MANUFACTURER. THE BELOW INFORMATION IS PROVIDED TO ASSIT IN ACQUIRING, REPLACING AND REGISTERING A REPLACEMENT LABEL.

The document

The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.

Components

Equipment and accessories, Fuel system, Labels and manuals

Vehicles listed
CHEVROLET W-SERIES2009 to 2011
GMC W-SERIES2009 to 2011
ISUZU ASCENDER2009
ISUZU F SERIES2009
ISUZU F-SERIES2009 to 2011
ISUZU F-SERIES2018 to 2020
ISUZU FTR2009
ISUZU FTR2018, 2019, 2020
ISUZU FVR2009
ISUZU FXR2009
ISUZU H SERIES2009
ISUZU HTR2009
ISUZU HVR2009
ISUZU HXR2009
ISUZU I-2902009 to 2010
ISUZU N-SERIES2009 to 2020
ISUZU NPR2009, 2010
ISUZU NPR2011 to 2015
ISUZU NPR2016, 2017, 2018, 2019, 2020
ISUZU NPR HD2009, 2010 (the catalog's model; the bulletin names a series or trim of it)
ISUZU NPR HD2011 to 2015
ISUZU NPR HD2016, 2017, 2018, 2019, 2020
ISUZU NPR XD2012 to 2015
ISUZU NPR XD2016, 2017, 2018, 2019, 2020
ISUZU NQR2009 to 2015
ISUZU NQR2016, 2017, 2018, 2019, 2020
ISUZU NRR2009 to 2015
ISUZU NRR2016, 2017, 2018, 2019, 2020
ISUZU REACH2012 to 2015
ISUZU REACH2016, 2017, 2018
ISUZU T SERIES2009 to 2010
ISUZU W-SERIES2009

Listing a model year does not mean every vehicle of it is concerned: the document says which.

Recalls for the same vehicles and component
19V4280002019-06-11. EQUIPMENT
17V7260002017-11-14. EQUIPMENT
16V1050002016-02-24. EQUIPMENT:OTHER:LABELS
15V7780002015-11-20. EQUIPMENT

A recall listed here may apply to some of the same vehicles. Only the manufacturer can say whether it applies to one vehicle.

Other bulletins for the same vehicles and component
WB23-X-001A2023-12-05. Service bulletin. THIS BULLETIN PROVIDES INFORMATION WITH REGARDS TO THE ISUZU COMMERCIAL VEHICLE (CV) SERVICE POLICIES AND PROCEDURES MANUAL (SPPM). THE ISUZU CV SPPM (SECTIONS 2.15 AND 2.16) PROVIDES DETAILED PROCEDURES RELATED TO VEHICLE STORAGE UP TO AND BEYOND 30 DAYS. PERFORMING THESE REQUIRED PROCEDURES AT THE SPECIFIED INTERVALS WILL PROPERLY MAINTAIN VEHICLES UNTIL THEY ARE RETAILED. FAILURE TO FOLLOW THE PROCEDURES OUTLINED MAY RESULT IN REPAIRS AND ADDITIONAL COSTS THAT COULD HAVE BEEN AVOIDED. WE ARE PROVIDING DEALERS WITH THIS BRIEF OVERVIEW OF THE RECOMMENDED PROCEDURES AS A REMINDER TO MAINTAIN OLDER INVENTORY. FAILURES RESULTING FROM IMPROPER, OR LACK OF, STORAGE PROCEDURES ARE NOT COVERED UNDER THE VEHICLE FACTORY WARRANTY.
WB23-X-0012023-11-06. Service bulletin. This bulletin provides information with regards to the Isuzu Commercial Vehicle (CV) Service Policies and Procedures Manual (SPPM). The Isuzu CV SPPM (sections 2.15 and 2.16) provides detailed procedures related to vehicle storage up to and beyond 30 days. Performing these required procedures at the specified intervals will properly maintain vehicles until they are retailed. Failure to follow the procedures outlined may result in repairs and additional costs that could have been avoided. We are providing dealers with this brief overview of the recommended procedures as a reminder to maintain older inventory. Failures resulting from improper, or lack of, storage procedures are not covered under the vehicle factory warranty.
WB08-X-001J2023-10-06. Service bulletin. Policies and procedures update for all commercial vehicles. This bulletin provides instructions with regard to the Isuzu Commercial Vehicle (CV) Warranty Parts Center on the topics of parts retention, parts preparation for shipping, and administration.
WB13-X-001B2022-08-30. Service bulletin. Isuzu Commercial Truck of America, Inc. (ICTA) is providing the following procedural recommendations to improve dealer efficiency when submitting Parts Warranty claims. We strongly recommend dealers follow these procedures in order to avoid delays in Parts Warranty claim payments and/or claim chargeback. This bulletin was revised to add a Parts Warranty Form
WB13-X-001A2022-08-30. Service bulletin. Isuzu Commercial Truck of America, Inc. (ICTA) is providing the following procedural recommendations to improve dealer efficiency when submitting Parts Warranty claims. We strongly recommend dealers follow these procedures in order to avoid delays in Parts Warranty claim payments and/or claim chargeback.
IB09-X-004C2022-08-02. Service bulletin. The Isuzu Commercial Truck of America (ICTA) Service Technical Assistance Center (TAC) provides diagnostic support to Isuzu dealer technicians repairing Isuzu vehicles in and out of vehicle warranty. A TAC case number will be issued solely for information tracking purposes and future contact reference.
IB09-X-002B2022-08-02. Service bulletin. The following is a list of the Isuzu-recommended Threebond product part numbers identified in the various Isuzu Workshop Manuals and bulletins. If a Threebond product is unavailable, we recommend that you utilize the chart below to find equivalent of similar products (when available) from Loctite and Permatex.
WB13X002F2022-06-04. Service bulletin. Isuzu is providing this bulletin to outline Isuzu's policy and procedures for Isuzu vehicles with Tire Warranty Coverage. Tire Warranty, Policy, Procedure, and Claim Submission are the categories in this bulletin.
CB21J0032022-02-12. Service bulletin. Voluntary Emissions Recall: Vehicles equipped with 6.6L L8T gasoline engines before 5/18/2021: Recall on the engine Important Engine Information. Label does not meet all regulatory requirements. Dealer will install new labels.
CB21J0022022-02-12. Service bulletin. Voluntary Emissions Recall: Vehicles equipped with 6.6L L8T gasoline engines after 5/18/2021: Recall on the engine Important Engine Information. Label does not meet all regulatory requirements. Dealer will install new label.