Service bulletin ITB18-034
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
| Type | Service bulletin |
|---|---|
| NHTSA id | 10149806 |
| Published by NHTSA | 2018-12-03 |
| Manufacturer's number | ITB18-034 |
| Manufacturer's date | 2018-10-12 |
| NHTSA component | POWER TRAIN |
NHTSA's summary
TRANSMISSION & ENGINE AUTOMATED DATA COLLECTION AND DIAGNOSTIC REPORTING SERVICE INFORMATION To support proper diagnosis and to promote Fixed-Right-First-Time ? Infiniti may review CONSULT-III plus (CIII plus) data relating to vehicle operation and function to help with vehicle diagnosis and diagnostic validation. IMPORTANT: For transmission/engine repair or replacement, retailers are required to connect C-III plus and perform ?Diagnosis (All Systems)?. Performing C-III plus ?Diagnosis (All Systems)? is also required prior to contacting any Infiniti call center (i.e. TECH-LINE, PCC, or WCC) for diagnostic support or claim preauthorization. NOTE: For additional information regarding Automated Vehicle Data Collection, refer to IWBI/18-019. To support Automated Vehicle Data Collection, your C-III plus must have the Diagnosis result reporting function-Setting turned ON. If Diagnosis result reporting function-Setting is OFF: - It may cause dealer consideration for Audit or the Anomalous Repair Control (ARC) program, where applicable. - It may result in a repair being non-warrantable. Refer to the Service Procedure on the next page to confirm your C-III plus ?Diagnosis result reporting function-Setting? is turned ON.
The document
The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.
Components
Transmission and driveline
| INFINITI EX35 | 2007 |
|---|---|
| INFINITI EX35 | 2008, 2009, 2010, 2011, 2012, 2013 |
| INFINITI EX37 | 2010 to 2013 |
| INFINITI FX35 | 2001 to 2002 |
| INFINITI FX35 | 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 |
| INFINITI FX35 | 2011 |
| INFINITI FX35 | 2012 |
| INFINITI FX35 | 2013 |
| INFINITI FX37 | 2010 to 2012 |
| INFINITI FX37 | 2013 |
| INFINITI FX45 | 2001 |
| INFINITI FX45 | 2003, 2004, 2005, 2006, 2007, 2008 |
| INFINITI FX45 | 2009 |
| INFINITI FX50 | 2009, 2010, 2011, 2012, 2013 |
| INFINITI G20 | 1991, 1992, 1993, 1994, 1995, 1996 |
| INFINITI G20 | 1997 to 1998 |
| INFINITI G20 | 1999, 2000, 2001, 2002 |
| INFINITI G25 | 2003 to 2010 |
| INFINITI G25 | 2011, 2012 |
| INFINITI G25 | 2013 |
| INFINITI G35 | 2001 to 2002 |
| INFINITI G35 | 2003, 2004, 2005, 2006, 2007, 2008, 2009 |
| INFINITI G35 | 2010 to 2013 |
| INFINITI G37 | 2003 to 2007 |
| INFINITI G37 | 2008, 2009, 2010, 2011, 2012, 2013 |
| INFINITI G37 | 2014 to 2015 |
| INFINITI I30 | 1995 |
| INFINITI I30 | 1996, 1997, 1998, 1999, 2000, 2001 |
| INFINITI I30 | 2002 to 2004 |
| INFINITI I35 | 2000 to 2001 |
| INFINITI I35 | 2002, 2003, 2004 |
| INFINITI J30 | 1991 to 1992 |
| INFINITI J30 | 1993, 1994, 1995, 1996, 1997 |
| INFINITI J30 | 2000 to 2009 |
| INFINITI JX | 2013 |
| INFINITI JX35 | 2013 |
| INFINITI M30 | 1991, 1992 |
| INFINITI M30 | 1993 to 1996 |
| INFINITI M35 | 2001 to 2005 |
| INFINITI M35 | 2006, 2007, 2008, 2009, 2010 |
| INFINITI M35 HYBRID | 2012, 2013 (the catalog's model; the bulletin names a series or trim of it) |
| INFINITI M35 HYBRID | 2014 |
| INFINITI M37 | 2011, 2012, 2013 |
| INFINITI M37 HYBRID | 2011, 2012, 2013 (the catalog's model; the bulletin names a series or trim of it) |
| INFINITI M45 | 2001 to 2002 |
| INFINITI M45 | 2003, 2004 |
| INFINITI M45 | 2005 |
| INFINITI M45 | 2006, 2007, 2008, 2009, 2010 |
| INFINITI M56 | 2011, 2012, 2013 |
| INFINITI M56 HYBRID | 2011, 2012, 2013 (the catalog's model; the bulletin names a series or trim of it) |
| INFINITI Q40 | 2015, 2016 |
| INFINITI Q45 | 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006 |
| INFINITI Q50 | 2014, 2015, 2016, 2017, 2018, 2019 |
| INFINITI Q50 HYBRID | 2014, 2015, 2016, 2017, 2018 (the catalog's model; the bulletin names a series or trim of it) |
| INFINITI Q60 | 2014, 2015 |
| INFINITI Q60 | 2016 |
| INFINITI Q60 | 2017, 2018 |
| INFINITI Q70 | 2014, 2015, 2016, 2017, 2018, 2019 |
| INFINITI Q70 HYBRID | 2014, 2015, 2016, 2017, 2018 (the catalog's model; the bulletin names a series or trim of it) |
| INFINITI QX | 2011 to 2012 |
| INFINITI QX30 | 2017, 2018 |
| INFINITI QX4 | 1997, 1998, 1999, 2000, 2001, 2002, 2003 |
| INFINITI QX4 | 2004 to 2009 |
| INFINITI QX50 | 2014, 2015, 2016, 2017 |
| INFINITI QX50 | 2018 |
| INFINITI QX50 | 2019 |
| INFINITI QX56 | 2001 to 2002 |
| INFINITI QX56 | 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013 |
| INFINITI QX60 | 2014, 2015, 2016, 2017, 2018, 2019 |
| INFINITI QX60 HYBRID | 2014, 2015, 2016, 2017, 2018 (the catalog's model; the bulletin names a series or trim of it) |
| INFINITI QX70 | 2014, 2015, 2016, 2017 |
| INFINITI QX80 | 2014, 2015, 2016, 2017, 2018, 2019 |
| INFINITI rQ50 HYBRID | 2019 |
Listing a model year does not mean every vehicle of it is concerned: the document says which.
| 2010088 | 2010-03-24. Powertrain |
|---|---|
| 03V164000 | 2003-05-05. POWER TRAIN:AUTOMATIC TRANSMISSION |
| 2003119 | 2003-05-01. Powertrain |
| 1999030 | 1999-03-02. Powertrain |
| 98V325000 | 1998-12-14. POWER TRAIN:AUTOMATIC TRANSMISSION |
A recall listed here may apply to some of the same vehicles. Only the manufacturer can say whether it applies to one vehicle.
| ITB13-008D | 2023-04-04. Service bulletin. CLICKING NOISE FROM FRONT OR REAR AXLE DURING TAKE-OFF/ACCELERATION This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin. |
|---|---|
| ITB13-008C | 2022-10-07. Service bulletin. CLICKING NOISE FROM FRONT OR REAR AXLE DURING TAKE-OFF/ACCELERATION This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin. |
| ITB13-008B | 2021-07-10. Service bulletin. CLICKING NOISE FROM FRONT OR REAR AXLE DURING TAKE-OFF/ACCELERATION This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin. |
| ITB10-016A | 2021-07-10. Service bulletin. VOLUNTARY SERVICE CAMPAIGN 2010 4WD INFINITI QX56; FRONT PROPELLER SHAFT Service Campaign ID # PC037 is no longer active. • Repair orders opened after this bulletin’s published date are no longer eligible for reimbursement under Campaign ID # PC037. • Discard all previous versions of ITB10-016. |
| ITB14021B | 2021-05-10. Service bulletin. SERVICE INFORMATION Replacement 5-speed rear wheel drive Automatic Transmission (A/T) assemblies and replacement control valves (valve bodies) now come with blank Transmission Control Modules (TCMs). Blank TCMs come without software and must be programmed (not reprogrammed) and then configured after they are installed. When ordering a replacement A/T or control valve, use the Infiniti electronic parts information systems to obtain the correct software program part number See this bulletin for further detail. |
| ITB14028A | 2021-05-10. Service bulletin. SERVICE INFORMATION The information in this bulletin is provided to help ensure correct diagnosis and repair of fluid leaks. All fluid leaks, when properly diagnosed, should be repaired (whether under warranty or customer pay) to ensure proper vehicle operation. However, certain normal operating conditions can be misdiagnosed as a leak requiring repair. Unnecessary repair or replacement of parts in connection with incorrectly diagnosed "leaks" can negatively impact customer satisfaction, be time consuming and costly, and if not performed correctly can lead to future repairs. See this bulletin for further detail. |
| ITB13005B | 2021-05-10. Service bulletin. IF YOU CONFIRM: The clutch pedal on an applied vehicle does not return to its normal (rested) position after being depressed to the floor OR the customer states the clutch pedal on an applied vehicle does not return to its normal (rested) position after being depressed to the floor AND there are no leaks in the clutch hydraulic system. ACTION: Flush (remove) ALL existing clutch hydraulic system fluid, and refill with GT-R R35 Special Brake Fluid (see PARTS INFORMATION). - Use the SERVICE PROCEDURE in this bulletin for proper flush and refill procedure. See this bulletin for further detail. |
| ITB12025A | 2021-05-10. Service bulletin. IF YOU CONFIRM The Engine Cooling Fan is louder than normal. and There is a noticeable lack of power when accelerating in traffic, particularly in HOT weather. ACTIONS 1. Reprogram the ECM, if necessary. 2. Perform Engine Fan Coupler function inspection. - With engine temperature between 80-95°C (176-203°F), confirm that Cooling Fan speed responds to the commands of the ECM with the procedure starting on page 10. 3. Replace the fan coupler, if necessary. See this bulletin for further detail. |
| ITB14055 | 2021-05-10. Service bulletin. SERVICE INFORMATION If a customer describes lack of power or poor acceleration, perform the following checks before attempting any repair: * Check for stored DTCs. * Check if the driver is resting their left foot on the brake pedal while accelerating. Advise the customer not to rest their foot on the brake while accelerating. * Use CONSULT-III plus in Engine Data Monitor to check operation of the brake lamp circuit signal. Monitor the brake switch during the incident; it should be "OFF". Please see this bulletn for further details. |
| ITB14014 | 2021-05-10. Service bulletin. SERVICE INFORMATION When diagnosing an applied vehicle for possible power steering gear (rack and pinion steering rack, or steering rack) leak issues, in some cases it may appear the steering rack is leaking when actually, it?s not. Use this service bulletin to help make a more accurate diagnosis of the steering rack. - Go to Power Steering Gear Inspection starting on page 2. See this bulletin for further detail. |