Service bulletin ITB-10-035A
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
| Type | Service bulletin |
|---|---|
| NHTSA id | 10034905 |
| Published by NHTSA | 2011-01-26 |
| Manufacturer's number | ITB-10-035A |
| Manufacturer's date | 2010-10-06 |
| NHTSA component | SUSPENSION:FRONT |
NHTSA's summary
INFINITI: FRONT SUSPENSION NOISE. A NOISE (CLUNKING, SQUEAKING, POPPING) CAN BE HEARD WHEN PERFORMING AT LEAST ONE OF THE FOLLOWING ACTIONS-TURNING STEERING WHEEL LEFT/RIGHT; DRIVING OVER SPEED BUMPS; DRIVING ON ROUGH ROADS; ACCELERATING/DECELERATING AND NOISE IS COMING FROM THE FRONT STABILIZER BAR BUSHING. *PE
The document
No address for NHTSA's copy can be built for this communication. Ask the dealer for it by the manufacturer's number.
Components
Suspension
| INFINITI QX56 | 2004, 2005, 2006, 2007, 2008, 2009, 2010 |
|---|
Listing a model year does not mean every vehicle of it is concerned: the document says which.
| 2010159 | 2010-05-26. Suspension |
|---|---|
| 10V208000 | 2010-05-14. SUSPENSION:FRONT:CONTROL ARM:LOWER ARM |
A recall listed here may apply to some of the same vehicles. Only the manufacturer can say whether it applies to one vehicle.
| ITB00024F | 2021-05-10. Service bulletin. SERVICE INFORMATION - This bulletin is to assist you in responding to customer questions about brake operation, and provides diagnostic and repair information for each item listed, if any should occur. - Most brake issues fall into the following categories: a. Brake Noise: A squeak, squeal, clunk, or groan that occurs when the brakes are applied or released. b. Brake Judder: A vibration that can be felt in the vehicle, steering wheel, or brake pedal when the brakes are applied. c. Pedal Feel: The effort needed to operate the brakes is too high or too low. SERVICE PROCEDURE 1. Verify the condition by road testing the vehicle with the customer. 2. Determine the specific brake issue based on the description in the Service Information above. 3. Follow the appropriate repair procedure(s), listed on the following pages, for your specific issue. See this bulletin for further details. |
|---|---|
| ITB99001A | 2021-05-10. Service bulletin. SERVICE INFORMATION This bulletin provides information to identify: - A leaking strut or a shock absorber that qualifies for replacement under warranty. - A strut or shock absorber that has slight oil seepage, a condition which is considered normal, does not affect strut/shock absorber operation or performance, and does not require replacement. - A strut or shock absorber that should be replaced due to rod resistance/noise issues. See this bulletin for further detail. |
| ITB06-005a | 2020-11-07. Service bulletin. VOLUNTARY SERVICE CAMPAIGN FRONT AXLE FLANGE BOLTS (4WD) Service Campaign ID # PB015 is no longer active. • Repair orders opened after this bulletin’s published date are no longer eligible for reimbursement under Campaign ID # PB015. • Please discard all previous versions of ITB06-005. |
| ITB17-018 | 2017-08-01. Service bulletin. BALL JOINT AXIAL END PLAY PROCEDURE SERVICE INFORMATION When working on the front suspension, use the updated service information in this bulletin along with the Electronic Service Manual (ESM). The updated information in this bulletin is a correction and a supplement to the ESM. |
| ITB-04-051B | 2010-05-24. Service bulletin. INFINITI: CLICKING NOISE FROM REAR AXLES DURING TAKE-OFF/ACCELERATION. *PE UPDATED 11/2/11. *PE |