Transport Canada recall 2025627
A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.
| Published by | Transport Canada (Canada) |
|---|---|
| Campaign number | 2025627 |
| Manufacturer's number | 25SC3 |
| Reported | 2025-11-14 |
| Component | Visual System |
| Notification type | Safety Mfr |
| Units potentially affected | 29371 |
What is wrong
Issue:
On certain vehicles, a software problem could cause the instrument panel cluster not to display when the vehicle is started. As a result, you may not be able to see certain information about the vehicle, including the speedometer, fuel gauge, warning lights and malfunction tell-tales.
Safety Risk:
Warnings, tell-tales and gauges that don't display could increase the risk of a crash.
Corrective Actions:
Ford will notify owners by mail and advise you to take your vehicle to a dealership to update the instrument panel cluster module software.
| 2025 FORD BRONCO | |
|---|---|
| 2026 FORD BRONCO | |
| 2025 FORD BRONCO SPORT | |
| 2026 FORD BRONCO SPORT |
A vehicle with no link is not in this site's catalog, which covers cars, multipurpose vehicles and trucks by model year. The campaign is from data as of 2026-10-19.
Bulletins for the same vehicles and component
| SSM 55008 | 2026-07-20. Service bulletin. Some 2021-2026 Ford vehicles may exhibit inoperative heated/cooled seats, heated steering wheel and/or front/rear defrost features after a remote start is performed through the Ford mobile application or with the key fob. Customers may also experience heated/cooled seats, heated steering wheel and/or front/rear defrost features turning on in unexpected conditions such as during warmer weather. These features will operate normally when commanded in the center display screen. This may be due to the customer not setting up their "Climate Settings" through the Ford mobile application. To correct this condition, inform the customer they should perform a remote start from the Ford mobile application and then adjust the "Climate Settings" in the Ford mobile application as desired. These settings only need to be set once and will persist through subsequent remote starts. Heated and cooled seats will be set to Level 2 when turned ON via "Climate Settings" in the Ford mobile application during a remote start event. This is normal operating characteristic. This condition does not affect vehicle durability and no a |
|---|---|
| TSB 26-2298 | 2026-06-29. Service bulletin. This article supersedes 25-2551. Reason for update: to correct the descriptions for the liftgate glass weather seals. Some of the vehicles listed in the model statement above may exhibit paint wearing along on the top inner edge of the tailgate where the rear window weather strip contacts the tailgate. This may be due to the accumulation of dirt between the rear window seal and tailgate. |
| SSM 54949 | 2026-06-24. Service bulletin. Some 2024-2026 Bronco vehicles may exhibit a condition where short drop windows, window bounce-back, and/or one-touch open/close does not operate properly. This may be due to loss of window initialization. Replacement or reprogramming of the DDM, PDM, and/or any other components may not resolve these conditions. The short drop windows feature may be restored by performing a reset procedure as described in the Digital Owner's Manual > Windows > Using Short Drop Windows > Resetting Short Drop Windows. If the customer is experiencing an inability to fully close the window due to repeated bounce-back events, the window bounce-back feature may be overridden by performing an override procedure as described in the Digital Owner's Manual > Windows > Window Bounce-Back > Overriding Windows Bounce-Back. The one-touch open/close feature may be restored by performing a reset procedure as described in the Digital Owner's Manual > Windows > Opening and Closing the Windows > Resetting Window One-Touch. These symptoms may return after a successful reset/override |
| SYNC-26.2.7.6 Bronco | 2026-04-06. Over-the-air update. "26S09 Recall Remedy -Update to enable rearview camera image to display when in reverse after infotainment screen thermal shutdown" |
| SYNC-26.2.4.11 Bronco | 2026-04-03. Over-the-air update. "26S09 Recall Remedy -Update to enable rearview camera image to display when in reverse after infotainment screen thermal shutdown" |
| IPC-25.21 Bronco | 2026-04-01. Over-the-air update. "25SC3 Recall remedy: -Instrument Panel Cluster update to prevent a potential black screen at start up" |
| SSM 54665 | 2026-03-18. Service bulletin. Some 2026 F-150/Bronco/Ranger/Mustang Mach-E vehicles may exhibit a blank center display screen after deactivating transport mode. To correct the condition, cycle the ignition from On/Ready to Off. Open, close and lock the door and let the vehicle sit for a minimum of 5 minutes. Reprogramming or replacement of any modules will not correct the condition. If the concern continues, refer to Workshop Manual (WSM), Section 415-00 Information and Entertainment System for normal diagnostics. |
| IPC-25.20 BroncoSport | 2026-03-03. Over-the-air update. "25SC3 Recall remedy: -Instrument Panel Cluster update to prevent a potential black screen at start up" |
| SSM 54202 | 2025-09-18. Service bulletin. Some 2023-2025 Explorer (rear windows only), Bronco Sport, Escape, and Maverick vehicles equipped with minor feature code B2DAC may exhibit an inoperative passenger front and/or rear window switch. To confirm a vehicle is built with a certain minor feature code, review the build information by clicking "Additional Information" under Vehicle Information or double-clicking the vehicle identification number (VIN) in the upper left corner of Professional Technician System (PTS). This may be due to an open diode in one of the passenger window switches. To correct the condition, replace the passenger window switch of the affected window. If the condition persists continue with normal diagnostics. Refer to Workshop Manual, Section 501-11. For claiming, use causal part 14529 and labor operation 14529A in the Service Labor Time Standards (SLTS) Manual. |
| SSM 54137 | 2025-08-19. Service bulletin. Various 2021-2025 Ford and Lincoln vehicles equipped with the rear camera on demand feature may exhibit "Please Check Surroundings For Safety" or "Full View Not Available" messages when the rear camera button is pressed and the vehicle is not in reverse. Inform customers this condition is considered normal operation and does not affect vehicle durability because the full rear view camera image can only be shown when the vehicle is in reverse. No additional diagnosis or service is required for this condition. |
A bulletin is the manufacturer's note to its dealers. It is not part of this recall.
Check one vehicle officially
Contains information licensed under the Open Government Licence – Canada.