Transport Canada recall 2023344
A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.
| Published by | Transport Canada (Canada) |
|---|---|
| Campaign number | 2023344 |
| Manufacturer's number | PMA21 |
| Reported | 2023-06-13 |
| Component | Structure |
| Notification type | Safety Mfr |
| Units potentially affected | 5 |
What is wrong
Issue:
On a small number of vehicles, the cowl area below the windshield may not be sealed correctly. As a result, water could leak onto the driver's side floor and damage the main body harness. If this happens, the wiring could short circuit and overheat, and various electrical systems may not work properly.
Safety Risk:
A short circuit can create the risk of a fire. Electrical systems that don't work properly could increase the risk of injury and/or a crash.
Corrective Actions:
Nissan will notify owners by mail and advise you to take your vehicle to a dealership to reseal the windshield in the driver side cowl area. The dealer will also inspect the main body wiring harness connector for signs of moisture or corrosion, and replace the main body harness and engine room wiring harness as necessary.
| 2022 NISSAN SENTRA |
|---|
A vehicle with no link is not in this site's catalog, which covers cars, multipurpose vehicles and trucks by model year. The campaign is from data as of 2026-10-19.
Bulletins for the same vehicles and component
| NTB09-131C | 2026-04-29. Service bulletin. CERTIFICATION LABEL AND VIN PLATE REPLACEMENT SERVICE INFORMATION Because of collision damage or other vehicle repair, a replacement “Certification Label” or “VIN Plate/Label” may be needed. HINT: Certification Label = FMVSS (Federal Motor Vehicle Safety Standards) label. These items may be available from Nissan by request if certain criteria are met. This bulletin lists the criteria and provides an application form for such replacements. · The “VIN Plate/Label” (metal plate or vinyl label) is attached to the instrument panel or body on the driver side at the base of the windshield (see Figure 1). · The “Certification Label” (vinyl adhesive label) is located on the lower area of the driver side B-Pillar (see Figure 1). |
|---|---|
| NTB09-131C | 2026-04-29. Service bulletin. CERTIFICATION LABEL AND VIN PLATE REPLACEMENT SERVICE INFORMATION Because of collision damage or other vehicle repair, a replacement “Certification Label” or “VIN Plate/Label” may be needed. HINT: Certification Label = FMVSS (Federal Motor Vehicle Safety Standards) label. These items may be available from Nissan by request if certain criteria are met. This bulletin lists the criteria and provides an application form for such replacements. · The “VIN Plate/Label” (metal plate or vinyl label) is attached to the instrument panel or body on the driver side at the base of the windshield (see Figure 1). · The “Certification Label” (vinyl adhesive label) is located on the lower area of the driver side B-Pillar (see Figure 1). |
| NTB22-045B | 2024-09-04. Service bulletin. RATTLE OR KNOCK NOISE FROM FRONT WHEN DRIVING OVER BUMPS AND/OR TURNING APPLIED VEHICLES: 2021-2024 Sentra (B18) APPLIED DATES: Built from January 2, 2021 to April 11, 2024 IF YOU CONFIRM A rattle or knock noise is heard from the front of the vehicle when driving over bumps and/or turning. HINT: To aid in diagnosis, it is recommended that you view the video clip on ASIST before starting. To view the video full screen, right click the center of the video screen and select “Full Screen”. ACTION Follow the SERVICE PROCEDURE in this bulletin to verify the passenger (RH) side Engine Mounting Insulator is the source of the noise, and replace it with the one listed in the PARTS INFORMATION on the last page. IMPORTANT: The purpose of ACTION (above) is to give you a quick idea of the work you will be performing. You MUST closely follow the entire SERVICE PROCEDURE as it contains information that is essential to successfully completing this repair. This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin. IF YOU CONFIRM A rattle or knock noise is heard from the front of the vehicle when driving over bumps and/or turning. HINT: To aid in diagnosis, it is recommended that you view the video clip on ASIST before starting. To view the video full screen, right click the center of the video screen and select “Full Screen”. ACTION Follow the SERVICE PROCEDURE in this bulletin to verify the passenger (RH) side Engine Mounting Insulator is the source of the noise, and replace it with the one listed in the PARTS INFORMATION on the last page. IMPORTANT: The purpose of ACTION (above) is to give you a quick idea of the work you will be performing. You MUST closely follow the entire SERVICE PROCEDURE as it contains information that is essential to successfully completing this repair. |
| NTB22-104A | 2024-06-13. Service bulletin. DIAGNOSING DOOR LOCK OPERATION This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin. |
| NTB20-010C | 2023-03-07. Service bulletin. WINDSHIELD WIPER BLADE PERFORMANCE/DIAGNOSIS SERVICE INFORMATION This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin. |
| NTB13-028H | 2023-03-07. Service bulletin. REMOVING FOREIGN MATERIAL FROM THE WINDOW GLASS This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin. |
| NTB09-081J | 2023-03-07. Service bulletin. WINDSHIELD CRACKING This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin. |
| NTB22-104 | 2023-01-10. Service bulletin. DIAGNOSING DOOR LOCK OPERATION SERVICE INFORMATION If a customer describes a concern of a door not opening and/or unlocking properly, on any of the APPLIED VEHICLES, use the Questions for the Customer below to help reproduce the concern, and then follow the SERVICE PROCEDURE starting on page 2 to determine if the Door Lock should be replaced. • Do not replace a Door Lock unless instructed to by the SERVICE PROCEDURE. Questions for the Customer: • When did you first notice the issue? • Is it consistent or intermittent? • Under what conditions does it occur? • Does it seem more likely to happen to a specific passenger/person in your family? • Has there been any change to the issue since it first began? |
A bulletin is the manufacturer's note to its dealers. It is not part of this recall.
Check one vehicle officially
Contains information licensed under the Open Government Licence – Canada.