Transport Canada recall 2022313
A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.
| Published by | Transport Canada (Canada) |
|---|---|
| Campaign number | 2022313 |
| Manufacturer's number | R22A2 / R24C6 |
| Reported | 2022-06-14 |
| Component | Structure |
| Notification type | Safety TC |
| Units potentially affected | 37115 |
What is wrong
Issue:
Over time, dirt buildup could cause the secondary hood latch to stick open after it is used. If this happens, and the primary hood latch is released, the hood may open suddenly while driving.
Safety Risk:
A hood that opens suddenly while driving could block the driver's view and increase the risk of a crash.
Corrective Actions:
Nissan will notify owners by mail and advise you to take your vehicle to a dealership to replace the secondary hood latch.
| 2013 NISSAN PATHFINDER | |
|---|---|
| 2014 NISSAN PATHFINDER | |
| 2015 NISSAN PATHFINDER | |
| 2016 NISSAN PATHFINDER |
A vehicle with no link is not in this site's catalog, which covers cars, multipurpose vehicles and trucks by model year. The campaign is from data as of 2026-10-19.
Bulletins for the same vehicles and component
| ITB09-063C | 2026-04-29. Service bulletin. CERTIFICATION LABEL AND VIN PLATE REPLACEMENT SERVICE INFORMATION Because of collision damage or other vehicle repair, a replacement “Certification Label” or “VIN Plate/Label” may be needed. HINT: Certification Label = FMVSS (Federal Motor Vehicle Safety Standards) label. These items may be available from Infiniti by request if certain criteria are met. This bulletin lists the criteria and provides an application form for such replacements. · The “VIN Plate/Label” (metal plate or vinyl label) is attached to the instrument panel or body on the driver side at the base of the windshield (see Figure 1). · The “Certification Label” (vinyl adhesive label) is located on the lower area of the driver side B-Pillar (see Figure 1). |
|---|---|
| NTB09-131C | 2026-04-29. Service bulletin. CERTIFICATION LABEL AND VIN PLATE REPLACEMENT SERVICE INFORMATION Because of collision damage or other vehicle repair, a replacement “Certification Label” or “VIN Plate/Label” may be needed. HINT: Certification Label = FMVSS (Federal Motor Vehicle Safety Standards) label. These items may be available from Nissan by request if certain criteria are met. This bulletin lists the criteria and provides an application form for such replacements. · The “VIN Plate/Label” (metal plate or vinyl label) is attached to the instrument panel or body on the driver side at the base of the windshield (see Figure 1). · The “Certification Label” (vinyl adhesive label) is located on the lower area of the driver side B-Pillar (see Figure 1). |
| NTB09-131C | 2026-04-29. Service bulletin. CERTIFICATION LABEL AND VIN PLATE REPLACEMENT SERVICE INFORMATION Because of collision damage or other vehicle repair, a replacement “Certification Label” or “VIN Plate/Label” may be needed. HINT: Certification Label = FMVSS (Federal Motor Vehicle Safety Standards) label. These items may be available from Nissan by request if certain criteria are met. This bulletin lists the criteria and provides an application form for such replacements. · The “VIN Plate/Label” (metal plate or vinyl label) is attached to the instrument panel or body on the driver side at the base of the windshield (see Figure 1). · The “Certification Label” (vinyl adhesive label) is located on the lower area of the driver side B-Pillar (see Figure 1). |
| NTB13-028H | 2023-03-07. Service bulletin. REMOVING FOREIGN MATERIAL FROM THE WINDOW GLASS This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin. |
| NTB09-081J | 2023-03-07. Service bulletin. WINDSHIELD CRACKING This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin. |
| NTB16-028 | 2021-05-24. Service bulletin. Intelligent key buttons inoperative |
| NTB13109A | 2021-05-10. Service bulletin. SERVICE INFORMATION If one or both Intelligent Keys cannot be located prior to customer delivery of an Applied Vehicle, refer to the applicable section of this bulletin for Intelligent Key registration instructions. - One (1) Intelligent Key Is Lost ----- Page 2 - Two (2) Intelligent Keys Are Lost ----- Page 3 See this bulletin for further detail. |
| NTB14060A | 2021-05-10. Service bulletin. SERVICE INFORMATION A two-piece design front engine mount is currently being used for the applied vehicles listed. A single thunk noise may be heard on the first acceleration of the day from this type of mount and is considered normal operation. The mount has also been designed with built in free-play that is normal. Under normal driving conditions: * A "thunk" noise may be heard on the first acceleration of the day. And * Does not occur again, or at any other time. DO NOT REPLACE THE MOUNT: * If it has free play or a "single event" thunk sound on the first acceleration of the day. This is considered a normal characteristic of this type of engine mount. * If a shift shock condition is present when shifting from park into gear or between any combination of gears. This condition is due to transmissions line pressures and not movement of the mount. NOTE: Refer to the Electronic Service Manual section TM - Transaxle & Transmission for further diagnostic information on shift shock. See this bulletin for further details. |
| NTB12110A | 2021-05-10. Service bulletin. SERVICE INFORMATION The control motors for the power rear hatch (back door) are calibrated for smooth and even operation. Adjustments or position change of the back door hinges or striker require the back door to be re-calibrated. See this bulletin for further detail. |
| NTB13070 | 2021-05-10. Service bulletin. SERVICE INFORMATION While performing the Intelligent Key Registration procedure, additional steps may need to be performed if the following occurs: - the first registration attempt is unsuccessful, AND - during the next registration attempt, CONSULT-III plus becomes hung up / stuck (see Figure 1 in the bulletin) prior to the pre-PIN read step and will not allow you to proceed. Perform the additional steps, beginning on page 2, to restart the procedure. See this bulletin for more detail. |
A bulletin is the manufacturer's note to its dealers. It is not part of this recall.
Check one vehicle officially
Contains information licensed under the Open Government Licence – Canada.