WenmarOpen by Wenmar Pro

NHTSA recall 13V261000

A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.

Campaign
Published byNHTSA (United States)
Campaign number13V261000
ManufacturerMobility Works (WMK Inc.)
Reported2013-06-21
ComponentEQUIPMENT
Units potentially affected37

What is wrong

Mobility Works is recalling certain model year 2006-2012 Ford E-150, E-250 and E-350 vehicles manufactured August 2006 through August 2012. The vehicles are equipped with certain Ricon S series and K Series wheelchair lifts with an optional armored pendant cable. The armored cable may be positioned such that it does not clear the wheelchair lift.

What can happen

If the cable does not clear the wheel chair lift it may contact the power lug and, if it does not have a nonconductive cover, or it has an improperly installed non-conductive cover, a short circuit may occur that could result in a fire.

The remedy

Mobility Works will notify owners and Ricon will provide a supplemental cover kit and instructions, free of charge. This recall campaign is expected to begin July 15, 2013. Owners may contact Mobility Works at 1-877-275-4912 and Ricon at 1-818-267-3000.

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

Vehicles this campaign lists
2006 FORD E-150Built 2006-08-01 to 2012-08-31.
2007 FORD E-150Built 2006-08-01 to 2012-08-31.
2008 FORD E-150Built 2006-08-01 to 2012-08-31.
2009 FORD E-150Built 2006-08-01 to 2012-08-31.
2010 FORD E-150Built 2006-08-01 to 2012-08-31.
2011 FORD E-150Built 2006-08-01 to 2012-08-31.
2012 FORD E-150Built 2006-08-01 to 2012-08-31.
2006 FORD E-250Built 2006-08-01 to 2012-08-31.
2007 FORD E-250Built 2006-08-01 to 2012-08-31.
2008 FORD E-250Built 2006-08-01 to 2012-08-31.
2009 FORD E-250Built 2006-08-01 to 2012-08-31.
2010 FORD E-250Built 2006-08-01 to 2012-08-31.
2011 FORD E-250Built 2006-08-01 to 2012-08-31.
2012 FORD E-250Built 2006-08-01 to 2012-08-31.
2006 FORD E-350Built 2006-08-01 to 2012-08-31.
2007 FORD E-350Built 2006-08-01 to 2012-08-31.
2008 FORD E-350Built 2006-08-01 to 2012-08-31.
2009 FORD E-350Built 2006-08-01 to 2012-08-31.
2010 FORD E-350Built 2006-08-01 to 2012-08-31.
2011 FORD E-350Built 2006-08-01 to 2012-08-31.
2012 FORD E-350Built 2006-08-01 to 2012-08-31.

A vehicle with no link is not in this site's catalog, which covers cars, multipurpose vehicles and trucks by model year. The campaign is from data as of 2026-10-19.

Investigated as EQ13003

This recall followed 1 NHTSA investigation. An investigation is NHTSA looking into a possible defect. It is not a finding that a defect exists, and it does not say that any one vehicle is affected.

NHTSA investigations that led to this recall
EQ13003Equipment query, opened 2013-06-13, closed 2014-05-20. Wheelchair Lift Cable May Short Circuit. EQUIPMENT:MECHANICAL:WRECKER AND WHEEL LIFT DEVICES.

From NHTSA's investigation file, as of 2026-10-19. The JSON has NHTSA's summary of each.

Bulletins for the same vehicles and component

Bulletins for the same vehicles and component
SSM 524762024-05-03. Service bulletin. All accessory stick-on keyless entry keypads come with a wallet card containing the master code. If the accessory keypad was factory installed, this card will be placed in the glove box and should be handed to the vehicles owner during initial delivery. Unlike the integrated (wired) factory keypad, the accessory keypad master code cannot be retrieved from the vehicle using a diagnostic scan tool. If the wallet card for an accessory keypad is lost, follow these steps to recover the code. Dealer Key Code access is granted through the Dealer Program Enrollment System (DPES); dealership management can authorize users. The authorized user must go to FMCDealer.com > Parts and Service > Parts Product Line Information > Keys/Entry Devices > Aftermarket Keyless Entry Keypad Code Access. Follow the instructions on the screen to obtain the master code for the accessory keypad.
SSM 470092018-05-29. Service bulletin. The Accessory (Wireless) Keyless Entry Keypad can only be used with vehicles that are factory built with Remote Keyless Entry (RKE). The master code for the Accessory (Wireless) Keyless Entry Keypad can be retrieved from FMCDealer - Parts and Service - Parts Product Line Information - Keys/Entry Devices - Aftermarket Keyless Entry Keypad Code Access. Access to this site is granted through Dealer Program Enrollment System (DPES) and Dealer Principal, General Manager or Parts and Service Director can authorize users. Once authorized the retrieval process for master code can be obtained. The master code for the Accessory Keyless Entry Keypad cannot be retrieved from the body control module(BCM) with a diagnostic tool.
SSM 472012018-05-21. Service bulletin. Replacing the original equipment SYNC/Navigation system with either an aftermarket SYNC/Navigation kit or modifying original SYNC/Navigation parts to provide additional features is not recommended nor supported on any Ford, Mercury or Lincoln vehicle. Only approved Genuine Ford accessories or originally installed systems are supported and certified to function correctly with other vehicle systems. If you suspect a system has been modified, the following resources can be used to verify original equipment: Monroney Label (Window Sticker), Professional Technician Society (PTS) OASIS tab select SYNC or HVBOM. For Genuine Ford accessories use: PTS Workshop Tab select Dealer Installed Accessory or Accessory Installation.
TSB-13-6-172013-10-31. Service bulletin. FORD:LINCOLN: ON SOME VEHICLES, THERE ARE VARIOUS RELATED CONCERNS ABOUT THE SYNC FEATURES, SUCH AS SYNC FEATURES INOPERATIVE, LACK OF OR SLOW RESPONSE TO PHONE AND VOICE BUTTON OPERATION. MODELS 2012-2013 FOCUS, E-SERIES, EDGE, EXPEDITION, FUSION, EXPLORER, F-150, F-250, NAVIGATOR, 2013-2014 FLEX, 2012-2014 FIESTA, MUSTANG, 2013 ESCAPE, C-MAX, TAURUS, 2012 MKZ. *PE
FSA-122292012-03-02. Service bulletin. ROUSH INDUSTRIES: SEE DOCUMENT SEARCH BUTTON FOR OWNER LETTER. SOME TRUCKS LABELS ARE INSTALLED WITH INCORRECT INFORMATION PERTAINING TO EMISSION CONTROL MANDATE OF CALIFORNIA AIR RESOURCES BOARD (CARB) EMISSION REGULATIONS. *PE
ER-11-20112012-03-02. Service bulletin. ROUSH INDUSTRIES: SEE DOCUMENT SEARCH BUTTON FOR OWNER LETTER. ON SOME TRUCKS, ROUSH DETERMINED AN INCORRECTLY INSTALLED LABEL WAS PLACED FOR VEHICLE EMISSION CONTROL MANDATED BY EPA. *PE
ER-122292012-03-02. Service bulletin. ROUSH INDUSTRIES: SEE DOCUMENT SEARCH BUTTON FOR OWNER LETTER. ON CERTAIN MODEL TRUCKS, IT HAS BEEN DETERMINED THAT THE LABEL FOR VEHICLE EMISSION CONTROL, HAS BEEN INCORRECTLY INSTALLED WITH INFORMATION MANDATED BY THE EPA. *PE
ER-2011-001P2011-09-13. Service bulletin. ROUSH INDUSTRIES SERVICE CAMPAIGN: SEE DOCUMENT SEARCH BUTTON FOR OWNER LETTER. THE EMISSION CONTROL LABELS DO NOT MEET STANDARDS. *RM
07032007-09-25. Service bulletin. CERTAIN 2007 E-SERIES STRIP CHASSIS VEHICLE EMISSION CONTROL INFORMATION (VECI) LABEL REPLACEMENT. *NJ

A bulletin is the manufacturer's note to its dealers. It is not part of this recall.

Check one vehicle officially