WenmarOpen by Wenmar Pro

Service bulletins for the 2011 Volkswagen Jetta

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

1332 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Bulletins, newest first
TT2611012023-07-05. Service bulletin. FUEL SYSTEM, GASOLINE; ENGINE AND ENGINE COOLING. 2012-2013 Passat does not have measured value block numbers. Check values ?Particle filter, kilometers since last regeneration?, ?Particle filter, oil ash volume?, ?Particle filter, soot mass calculated?, and ?Particle filter, soot mass measured? instead.
TT2413062023-07-05. Service bulletin. FUEL SYSTEM, GASOLINE. Fuel injector seals are available separately for service repairs. It is not necessary to replace the complete fuel injector if a seal (upper or lower) is needed. Please see ETKA for the latest parts information.
TT2413032023-07-05. Service bulletin. ELECTRICAL SYSTEM; ENGINE AND ENGINE COOLING:ENGINE:ENGINE CONTROL MODULE (ECU/ECM). When diagnosing a vehicle concern, and fault P130A ?Hide Cylinder? is found in the Engine Control Module (ECM), be aware that Engine Control Module (ECM) fault P130A ?Hide Cylinder? indicates a cylinder shut down and does not require diagnosis.
TT2411022023-07-05. Service bulletin. ENGINE AND ENGINE COOLING; ENGINE AND ENGINE COOLING:ENGINE:ENGINE CONTROL MODULE (ECU/ECM). For concerns of Fault Code P117A ?Bank 1, correction Lambda middle reached adjustment limit? stored in the ECM, check that the O2 sensors have not been installed or connected improperly.
TT24071032023-07-05. Service bulletin. ENGINE AND ENGINE COOLING:ENGINE:ENGINE CONTROL MODULE (ECU/ECM). When diagnosing fault code P2279-Leaking Air in Intake System, be sure to check the cam timing first.
TT2314012023-07-05. Service bulletin. FUEL SYSTEM, GASOLINE. When replacing or adapting fuel injectors, if there is no Guided Functions Test Plan, utilize the following :UDS vehicles: Go to Guided Functions / Adapting Injector Quantity Adjustment correct values (IMA-IVA).
TT2310022023-07-05. Service bulletin. FUEL SYSTEM, GASOLINE. When replacing fuel system components on the Common Rail TDI engine (including the fuel filter), the fuel system must be primed.
TT2113012023-07-05. Service bulletin. PARKING BRAKE. If mechanical damage is found to the turbocharger (e.g. damaged compression wheel, loose or broken shaft), it is not enough to just replace the turbocharger.
TT2110012023-07-05. Service bulletin. ENGINE. When diagnosis on the above engine leads to the testing of the N75, please refer to the picture below. The diagram shows which vacuum ports on the N75 valve should hold vacuum and which ones should not.
TB4013012023-06-26. Service bulletin. STRUCTURE. Recommended procedure for removing damaged CV boot.
TB5014032023-06-26. Service bulletin. WHEELS; STRUCTURE. Surface corrosion or corrosion perforation can occur on various locations around the front wheel arch.
TB4813032023-06-26. Service bulletin. ELECTRICAL SYSTEM; STEERING. Poor Power Steering Assistance, DTCs 16344 014, 16353 014, 16355 014, 02614 014 Stored in Power Steering Control Module J500
TB4813022023-06-26. Service bulletin. ELECTRICAL SYSTEM; STEERING. Poor Power Steering Assistance, DTCs 16344 014, 16353 014, 16355 014, 02614 014 Stored in Power Steering Control Module J500
TB4613032023-06-26. Service bulletin. SERVICE BRAKES. Brake Disc, Pulsation, All Vehicles except Routan (U.S. Only)
TB4613022023-06-26. Service bulletin. SERVICE BRAKES. Brake Disc, Pulsation, All Vehicles except Routan (U.S. Only)
TB4413012023-06-26. Service bulletin. WHEELS. This Technical Bulletin provides an overview for performing vehicle four Wheel Alignment and information on improving vehicle pull/drift using selective tire placement. The information provided is based on the Hunter alignment equipment and the Hunter GSP9700 balancer with StraightTrak. The general information provided in the bulletin, such as alignment terminologies, warranty information and Vehicle drift/pull diagnosis is not dependent on the alignment equipment and still applies with the use of other alignment equipment.
TB4412032023-06-26. Service bulletin. WHEELS. This Technical Bulletin provides an overview for performing vehicle four Wheel Alignment and information on improving vehicle pull/drift using selective tire placement. The information provided is based on the Hunter alignment equipment and the Hunter GSP9700 balancer with StraightTrak. The general information provided in the bulletin, such as alignment terminologies, warranty information and Vehicle drift/pull diagnosis is not dependent on the alignment equipment and still applies with the use of other alignment equipment.
TB3713022023-06-26. Service bulletin. POWER TRAIN. This bulletin provides a procedure to determine ?repair? versus ?replacement? of an automatic transmission. This procedure is to be used ?After? the transmission has been removed from the vehicle.
TB3713012023-06-26. Service bulletin. POWER TRAIN. Automatic Transmission Fluid Requirements
TT9714022023-06-13. Service bulletin. ELECTRICAL SYSTEM. The DLC is intended for use with diagnostic scan tools and by emissions testing stations. However, aftermarket devices (i.e., drive data recorders) that connect to the DLC have now become available.
TT9714012023-06-13. Service bulletin. VISIBILITY; VISIBILITY:WINDSHIELD WIPER/WASHER. The indicator lamp in the I.P. for washer fluid remains illuminated and the washer reservoir is full. Validate the washer reservoir is full with the proper washer solvent (G-052-164). Refer to Elsa for proper fluid type and fluid quantities under repair manual, maintenance, fluid capacity table. If the fluid is not blue in color, drain the fluid, remove the sensor and clean with cleaner (D-009-401-04) or equivalent. Reinstall the sensor, top off washer reservoir with proper fluid and validate that the indicator lamp in the I.P. is no longer illuminated.
TT9614022023-06-13. Service bulletin. EQUIPMENT; ELECTRICAL SYSTEM. When replacing the complete vehicle lock set (all vehicle keys and lock cylinders) for any reason, be aware that the ?Adapt keys? test plan will not allow the new keys to adapt to the vehicle. Instead, perform the test plan for ?New identity?. During this test plan, make the appropriate selection to indicate only the lock set has been replaced, as shown below in figures 1 and 2.
TT9612072023-06-13. Service bulletin. EQUIPMENT; ELECTRICAL SYSTEM:IGNITION:ANTI-THEFT:IMMOBILIZER/PROXIMITY:KEY/SENDER; ELECTRICAL SYSTEM. All keys must be present during key adaptation. Immobilizer reader coil is ALWAYS located in the steering column. DO NOT remove Start/Stop button mounted in center console to access reader coil.
TT9413022023-06-13. Service bulletin. EXTERIOR LIGHTING:TAIL LIGHTS; EXTERIOR LIGHTING. The picture below shows an A6 Jetta Outer Tail Lamp Bulb Holder (Part Numbers 5C6945257 & 5C6947258). During the assembly process of this component, the manufacturer utilizes a plastic weld to complete the assembly. This plastic weld flux is completely normal and is not evidence of any malfunction. No repair or replacement attempt should be performed, as this is not indicative of any problem.
TT9214022023-06-13. Service bulletin. VISIBILITY; VISIBILITY:WINDSHIELD WIPER/WASHER. The indicator lamp in the I.P. for washer fluid remains illuminated and the washer reservoir is full. Validate the washer reservoir is full with the proper washer solvent (G-052-164). Refer to Elsa for proper fluid type and fluid quantities under repair manual, maintenance, fluid capacity table. If the fluid is not blue in color, drain the fluid, remove the sensor and clean with cleaner (D-009-401-04) or equivalent. Reinstall the sensor, top off washer reservoir with proper fluid and validate that the indicator lamp in the I.P. is no longer illuminated.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.