WenmarOpen by Wenmar Pro

Service bulletins for the 2011 Volkswagen Jetta

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

1332 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Only bulletins with component: Tire pressure monitoring are shown. Show all

Bulletins, newest first
TT4410012023-07-05. Service bulletin. TIRES; TIRES:PRESSURE MONITORING AND REGULATING SYSTEMS. The TPMS system on the MY vehicles listed above, is now an indirect type system. There are no sensors in the wheels as on previous models. There is no separate TPMS module, as all functions are part of the ABS module and monitored through the ABS sensors. For more information on the system, see the May edition of Tech Talk on VwWebsource
TT 44-10-012019-04-08. Service bulletin. TIRES:PRESSURE MONITORING AND REGULATING SYSTEMS; ELECTRICAL SYSTEM. Tech Tips (Tire Pressure Monitoring System): The TPMS system on the MY vehicles (2011-2013 Jetta, Tiguan, GTI, Golf and 2012-2013 Passat) is now an indirect type system. There are no sensors in the wheels as on previous models. There is no separate TPMS module, as all functions are part of the ABS module and monitored through the ABS sensors. This document informs where to find further detailed information on the system
TT 44-11-012017-12-14. Service bulletin. TIRES:PRESSURE MONITORING AND REGULATING SYSTEMS. Tech Tips (Brake Electronics (ABS) Fault Code 02757 Diagnosis Tip): This document informs if the battery has a low state of charge or is disconnected, fault code 02757 "adapting tire pressures" may set in address 03 - Brake Electronics. The GFF test plan for this fault may prove inconclusive and the fault may not clear, even after performing TPMS reset using the button in glove box or through the MFI. To resolve fault, use ODIS control module OBD or VAS PC Vehicle self-diagnosis to run basic settings 42 under address 03 - Brake Electronics. After selecting basic settings 42, an activate button may be present, but should not be used. The display will change to "reset" once the procedure is complete. After completing basic settings, back out of Brake Electronics and remove the scan tool. Reset TPMS by pressing the "set" button in the glove box or making appropriate selection through MFI, and then road test vehicle to ensure fault does not return.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.