WenmarOpen by Wenmar Pro

Service bulletins for the 2024 Toyota Tacoma

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

94 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

Only bulletins with component: Electrical system are shown. Show all

Bulletins, newest first
T-SB-0016-262026-03-07. Service bulletin. ELECTRICAL SYSTEM. Some 2024 – 2026 model year Tacoma vehicles may exhibit a “chirp” noise from the HVAC magnetic clutch upon engagement.
T-SB-0058-23 Rev12025-07-10. Service campaign. ELECTRICAL SYSTEM. The air conditioning dye injection tool kit has been developed to aid in identifying the location of air conditioning refrigerant leaks. The procedures outlined in this Service Bulletin aid in locating, inspecting, and repairing refrigerant leaks.
T-SB-0084-24 Rev12025-06-06. Service bulletin. ELECTRICAL SYSTEM. Some 2024 Tacoma and Tacoma Hybrid vehicles equipped with a Blind Spot Monitor (BSM) may exhibit a condition where the Trailer Driving Assist Active message is displayed without a trailer connected. The BSM software has been updated.
T-TT-0779-252025-06-06. Service bulletin. ELECTRICAL SYSTEM. To assist with the early detection and early resolution of audio related concerns you may be asked to recover MMR data from the head unit. The following steps are instructions on how to retrieve the data from the system and are only to be used when requested by FTS and/or FPE.
T-SB-0084-24 Rev12025-05-15. Service bulletin. ELECTRICAL SYSTEM. Some 2024 Tacoma and Tacoma Hybrid vehicles equipped with a Blind Spot Monitor (BSM) may exhibit a condition where the Trailer Driving Assist Active message is displayed without a trailer connected. The BSM software has been updated.
T-TT-0779-252025-05-15. Service bulletin. ELECTRICAL SYSTEM. To assist with the early detection and early resolution of audio related concerns you may be asked to recover MMR data from the head unit. The following steps are instructions on how to retrieve the data from the system and are only to be used when requested by FTS and/or FPE.
T-SB-0013-24 Rev12025-04-08. Service bulletin. ELECTRICAL SYSTEM. The Immobilizer and Smart Key Reset is a feature that allows the registration of new keys when all master keys are lost. Once the system is reset, all previously registered keys will be erased and can never be reused. Another feature, Add/Remove Key, is also available. Once a key is removed, it can never be reused.
T-SB-0013-24 Rev12025-03-11. Service bulletin. ELECTRICAL SYSTEM. The Immobilizer and Smart Key Reset is a feature that allows the registration of new keys when all master keys are lost. Once the system is reset, all previously registered keys will be erased and can never be reused. Another feature, Add/Remove Key, is also available. Once a key is removed, it can never be reused.
T-SB-0120-20 Rev22025-02-12. Service bulletin. ELECTRICAL SYSTEM. OBSOLETE NOTICE January 30, 2025: This bulletin is now obsolete. Please see T-SB-0015-25.
T-SB-0015-252025-02-12. Service bulletin. ELECTRICAL SYSTEM. Some 2021 – 2025 model year Toyota vehicles may require the download and installation of vehicle specific software or configuration software when the Electronic Control Unit (ECU) is replaced. GTS+ software has been modified to indicate when configuration software is required. A new Configure column has been added to the GTS+ Health Check Results screen to show when configuration software is available for a specific ECU.
T-SB-0011-252025-02-12. Service bulletin. ELECTRICAL SYSTEM. When certain vehicle ECUs are replaced, the ECU Security Key must be written in order for that ECU to communicate on the vehicle network. The GTS+ Software Health Check Results screen has been enhanced to help identify if a replacement ECU requires an ECU Security Key.
24TC062025-01-09. Service bulletin. ELECTRICAL SYSTEM; STRUCTURE:BODY. TECHNICAL INSTRUCTIONS FOR SPECIAL SERVICE CAMPAIGN 24TC06 Active Grille Shutter Engine Warning Light May Illuminate CERTAIN 2024 TACOMA
24TC062025-01-09. Service campaign. ELECTRICAL SYSTEM; STRUCTURE:BODY. An incorrectly sized seal can allow water or moisture to enter a connector on the Active Grille Shutter. This can cause the engine warning light to illuminate and/or the Active Grille Shutter to no longer open or close as designed.
24TC062024-12-07. Service campaign. ELECTRICAL SYSTEM; STRUCTURE:BODY. Frequently Asked Questions Certain 2024 Model Year Tacoma Active Grille Shutter Engine Warning Light May Illuminate
24TC062024-12-07. Service bulletin. ELECTRICAL SYSTEM; STRUCTURE:BODY. TECHNICAL INSTRUCTIONS FOR SPECIAL SERVICE CAMPAIGN 24TC06 Active Grille Shutter Engine Warning Light May Illuminate CERTAIN 2024 TACOMA
24TC062024-12-07. Service campaign. STRUCTURE:BODY; ELECTRICAL SYSTEM. An incorrectly sized seal can allow water or moisture to enter a connector on the Active Grille Shutter. This can cause the engine warning light to illuminate and/or the Active Grille Shutter to no longer open or close as designed.
24TC062024-12-07. Service campaign. ELECTRICAL SYSTEM; STRUCTURE:BODY. An incorrectly sized seal can allow water or moisture to enter a connector on the Active Grille Shutter. This can cause the engine warning light to illuminate and/or the Active Grille Shutter to no longer open or close as designed.
T-SB-0100-242024-11-08. Service bulletin. ELECTRICAL SYSTEM. Some 2022 – 2024 model year Tundra and Tundra Hybrid, 2023 – 2024 model year Sequoia Hybrid, and 2024 model year Tacoma and Tacoma Hybrid vehicles equipped with a premium 14-inch audio multimedia display may exhibit a condition where the radio receiver power/volume knob becomes detached. An updated radio receiver power/volume knob is available to reduce the possibility of this condition.
T-SB-0083-242024-11-06. Service bulletin. ELECTRICAL SYSTEM. Some 2024 Tacoma and Tacoma Hybrid vehicles equipped with an adaptive variable suspension may exhibit a condition where the custom drive mode is missing from the Vehicle Customize – Settings menu. The air conditioner supply amplifier software has been updated.
T-SB-0120-20 Rev22024-07-06. Service bulletin. ENGINE; ELECTRICAL SYSTEM. Some 2021 – 2024 model year Toyota vehicles may require the download and installation of vehicle specific software or configuration software when the Electronic Control Unit (ECU) is replaced. GTS+ software has been modified to indicate when configuration software is required. A new Configure column has been added to the GTS+ Health Check Results screen to show when configuration software is available for a specific ECU. REVISION NOTICE April 18, 2024 Rev2: •Applicability has been updated to include 2024 model year Tundra, Tundra Hybrid, Venza Hybrid, bZ4X, Corolla, Corolla Cross, Corolla Cross Hybrid, Corolla Hybrid, Crown, GR Corolla, Corolla Hatchback, Prius, Prius Prime, Sequoia Hybrid, Highlander, Grand Highlander, Grand Highlander Hybrid, Land Cruiser, Tacoma, Tacoma Hybrid, and Mirai vehicles and 2023 model year Corolla Hatchback and Prius Prime vehicles. •The Introduction section has been updated. •The Operation Procedure section has been removed. •The Standard ECU Configuration Procedure and ECU Configuration Value Writing Procedure sections have been added.
T-TT-0755-242024-07-06. Service bulletin. ELECTRICAL SYSTEM. The condition above is design intent for vehicles equipped with an accessory Power Port or Tire Inflator. During the installation process of the Power Port or Tire Inflator, the pre-wire connector is removed from the dummy cap (which is attached to the harness) and is left attached when power is connected. The purpose for the dummy cap is to prevent connector water intrusion/corrosion when the accessory is not installed.
T-TT-0754-242024-07-06. Service bulletin. ELECTRICAL SYSTEM. Customers have expressed concerns about the performance of Qi Wireless Chargers. Wireless chargers on applicable vehicles are designed to work with Qi Certified devices only. MagSafe devices, that are not Qi Certified, may not charge as expected with Qi Wireless Chargers.
T-TT-0751-242024-07-06. Service bulletin. ELECTRICAL SYSTEM. Some customers have complained that the wireless functions of their Key Fob stop working. Key Fob LEDs will not turn ON, but engine starts with key held up against start button. Key battery voltage is confirmed OK and no DTC/RoB is found. This condition may occur if customer places Key Fob near wireless charger while phone is charging. When the key battery is removed and reinstalled, the Key Fob begins to operate normally.
T-SB-0120-20 Rev22024-07-06. Service bulletin. ENGINE; ELECTRICAL SYSTEM. Some 2021 – 2024 model year Toyota vehicles may require the download and installation of vehicle specific software or configuration software when the Electronic Control Unit (ECU) is replaced. GTS+ software has been modified to indicate when configuration software is required. A new Configure column has been added to the GTS+ Health Check Results screen to show when configuration software is available for a specific ECU. REVISION NOTICE April 18, 2024 Rev2: •Applicability has been updated to include 2024 model year Tundra, Tundra Hybrid, Venza Hybrid, bZ4X, Corolla, Corolla Cross, Corolla Cross Hybrid, Corolla Hybrid, Crown, GR Corolla, Corolla Hatchback, Prius, Prius Prime, Sequoia Hybrid, Highlander, Grand Highlander, Grand Highlander Hybrid, Land Cruiser, Tacoma, Tacoma Hybrid, and Mirai vehicles and 2023 model year Corolla Hatchback and Prius Prime vehicles. •The Introduction section has been updated. •The Operation Procedure section has been removed. •The Standard ECU Configuration Procedure and ECU Configuration Value Writing Procedure sections have been added.
T-TT-0755-242024-07-06. Service bulletin. ELECTRICAL SYSTEM. The condition above is design intent for vehicles equipped with an accessory Power Port or Tire Inflator. During the installation process of the Power Port or Tire Inflator, the pre-wire connector is removed from the dummy cap (which is attached to the harness) and is left attached when power is connected. The purpose for the dummy cap is to prevent connector water intrusion/corrosion when the accessory is not installed.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.