WenmarOpen by Wenmar Pro

Service bulletins for the 2018 Toyota Camry

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

394 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Only bulletins with component: Transmission and driveline are shown. Show all

Bulletins, newest first
T-SB-0330-172021-06-14. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION. Shift shock on initial start-up or reaccelertation.
T-TT-0580-19_Rev2020-02-18. Service bulletin. POWER TRAIN. TT: Currently under investigation. Please contact TAS if you have a vehicle that exhibits a leak from the Transmission Side Cover with no signs of damage or other conditions unrelated to regardless of miles or months in service. If it?s a Sunday or holiday continue with diagnosis and repair, save all parts and details, contact TAS on the next available work day and review details with TAS engineer.
T-TT-0580-192019-12-16. Service bulletin. POWER TRAIN. TT: Some 2018-2020 model year UA80/UB80 transmission equipped models may experience a leak from the Transmission Side Cover. This issue is currently under investigation. Vehicles are being sought regardless of months in service or mileage. Only seeking vehicles with leaking transmissions with no other signs of damage to the side cover.
T-SB-0134-16-Rev2019-09-03. Service bulletin. POWER TRAIN; ELECTRICAL SYSTEM; ENGINE. TSB: REVISION NOTICE July 01, 2019 Rev2: ? Applicability has been updated to 2019 ? 2020 model year Toyota vehicles. ? The Techstream Preparation and Process Overview sections have been updated. October 30, 2017 Rev1: ? Applicability has been updated to include 2018 model year vehicles. Any previous printed versions of this bulletin should be discarded. SUPERSESSION NOTICE The information contained in this bulletin supersedes SB No. T-SB-0012-13. Service Bulletin No. T-SB-0012-13 is obsolete and any printed versions should be discarded. Be sure to review the entire content of this bulletin before proceeding. Flash reprogramming allows the Electronic Control Unit (ECU) software to be updated without replacing the ECU. Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service Bulletins. This bulletin details the Techstream ECU flash reprogramming process and outlines use of the Technical Information System (TIS) and the Calibration Update Wizard (CUW). Flash calibration updates can only be applied to the vehicle/ECU combination for which they are intended. ECUs have internal security that will not allow them to be programmed with another ECU?s information. NOTE ECU is a Toyota term used to describe integrated computerized devices responsible for managing the operation of a system or subsystem. For the purposes of this bulletin, the term ?ECU? is used as a generic label for the following SAE J1930 standard references: ? Powertrain Control Module (PCM) ? Engine Control Module (ECM) ? Transmission Control Module (TCM) ? Any other Toyota specific control unit
T-SB-0323-172018-11-05. Service bulletin. ENGINE; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM). TSB: Some 2018 model year Camry vehicles equipped with four-cylinder engines may exhibit a MIL ?ON? condition with Diagnostic Trouble Code (DTC) P26CB71 (Electric Water Pump Speed Stuck). The Engine Control Module (ECM) (SAE term: Powertrain Control Module [PCM]) logic has been modified to address this condition. Follow the Repair Procedure in this bulletin to address this condition.
T-SB-0330-172018-06-11. Service bulletin. ENGINE; ELECTRICAL SYSTEM; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM). TSB: Some 2018 model year Camry vehicles may exhibit a shift shock when shifting from Park to Reverse on initial startup or a delay/shock when reaccelerating quickly after slowing down to a stop or near stop. The Engine Control Module (ECM) (SAE term: Powertrain Module [PCM]) logic has been updated to address this condition. Follow the Repair Procedure below to address this condition.
T-SB-0323-172018-06-11. Service bulletin. ELECTRICAL SYSTEM; ENGINE; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM). TSB: Some 2018 model year Camry vehicles equipped with four-cylinder engines may exhibit a MIL ?ON? condition with Diagnostic Trouble Code (DTC) P26CB71 (Electric Water Pump Speed Stuck). The Engine Control Module (ECM) (SAE term: Powertrain Control Module [PCM]) logic has been modified to address this condition. Follow the Repair Procedure in this bulletin to address this condition.
T-SB-0018-182018-04-23. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION:TORQUE CONVERTER. TSB: Some 2018 model year Camry vehicles equipped with four-cylinder engines may exhibit a MIL ?ON? condition with Diagnostic Trouble Code (DTC) P07407E (Torque Converter Clutch Actuator Stuck On). The Engine Control Module (ECM) (SAE term: Powertrain Control Module [PCM]) logic has been modified to address this condition. Follow the Repair Procedure in this bulletin to address this condition.
T-TT-0474-182018-04-02. Service bulletin. POWER TRAIN. TT: For some repairs on 2017-2018 Sienna and Highlander and 2018 Camry vehicles equipped with the 8-speed transmission, it is necessary to determine transmission serial number and understand production date.
T-SB-0010-182018-03-12. Service bulletin. ELECTRICAL SYSTEM; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM); ELECTRICAL SYSTEM:SOFTWARE. TSB: When completing a transaxle assembly replacement, Engine Control Module (ECM) (SAE term: Powertrain Control Module [PCM]) replacement, or ECM (PCM) reprogram, ensure the correct ECM (PCM) software is matched with the transaxle assembly hardware. Some 2018 model year Camry vehicles require different ECM (PCM) software based on the transaxle assembly hardware installed in the vehicle. NOTICE Mismatched transaxle assembly hardware and ECM (PCM) software combinations may result in a harsh shift or shift flare. If this occurs after the original repair, additional ECM (PCM) replacement and reprogramming will be required. This additional ECM (PCM) replacement/reprogramming is NOT covered under warranty. Use the information in this Service Bulletin to confirm that the correct ECM (PCM) hardware and software are used based on the transaxle assembly part number and serial number.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.