WenmarOpen by Wenmar Pro

Service bulletins for the 2015 Subaru WRX

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

446 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

Only bulletins with component: Glass, wipers and mirrors are shown. Show all

Bulletins, newest first
07-152-19R2020-02-05. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY; VISIBILITY; ELECTRICAL SYSTEM; EQUIPMENT. This bulletin announces availability of new power window switch assemblies.
07-152-19R2019-08-06. Service bulletin. VISIBILITY:POWER WINDOW DEVICES AND CONTROLS; ELECTRICAL SYSTEM; VISIBILITY. "This bulletin announces availability of new power window switch assemblies developed to address the following customer concerns: • Power windows inoperative from the driver’s door master and / or passenger front door switch • Unable to remotely operate other door windows from the driver’s door master switch • One-Touch Auto Up / Down features inoperative from either / both front door switches"
07-152-192019-07-01. Service bulletin. ELECTRICAL SYSTEM; VISIBILITY. This bulletin announces availability of new power window switch assemblies developed to address the following customer concerns: ? Power windows inoperative from the driver?s door master and / or passenger front door switch ? Unable to remotely operate other door windows from the driver?s door master switch ? One-Touch Auto Up / Down features inoperative from either / both front door switches
12-234-182018-08-20. Service bulletin. VISIBILITY:WINDSHIELD. This bulletin provides a repair procedure for replacing the foam cushion installed between the top front edge of the IP and the windshield glass. Use the supplied Service Procedure to address a customer concern involving the foam cushion becoming visible above the IP near the defroster vent outlets.
12-234-182018-04-16. Service bulletin. VISIBILITY:WINDSHIELD. This bulletin provides a repair procedure for replacing the foam cushion installed between the top front edge of the IP and the windshield glass. Use the supplied Service Procedure to address a customer concern involving the foam cushion becoming visible above the IP near the defroster vent outlets
12-207-162018-04-02. Service bulletin. VISIBILITY:GLASS, SIDE/REAR. This bulletin announces a change to the procedure used in production of the rear door glass assembly. The bottom edge of the door glass is pressed into a metal channel lined with rubber. The channel attaches the door glass assembly to the window regulator. In below-freezing temperature conditions, water freezing in the channel combined with the door glass sticking to the door weatherstrip can increase chance of the glass separating from the channel when attempting to operate (lower) the window. A lubricant has been added to the rubber portion to insure the glass gets fully seated during assembly which maximizes the clamping force of the channel on the glass.
12-195-152017-03-08. Service bulletin. STRUCTURE:BODY:DOOR; VISIBILITY:REARVIEW MIRRORS/DEVICES:EXTERIOR. SHOULD YOU RECEIVE A CUSTOMER CONCERN OF VIBRATION OR LOOSENESS IN EITHER OF THE DOOR MIRRORS, A DESIGN CHANGE HAS BEEN MADE TO THE 3 MIRROR HEAD MOUNTING HOLES IN THE MOUNTING BASE. IN ADDITION, A NEW RETAINING BOLT AND TIGHTENING TORQUE SPECIFICATION ARE NOW USED TO SECURE THE MIRROR HEAD TO THE MOUNTING BASE. THIS BULLETIN PROVIDES A PROCEDURE FOR REPAIRING THE EXISTING MIRROR ASSEMBLY BY REPLACING THE THREE MOUNTING SCREWS WITH UPDATED FASTENERS. NOTE: REFER TO TSB 12-152-13 DATED 6/17/2013 FOR RELATED INFORMATION ON BRZ MODELS.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.