Service bulletins for the 2019 Subaru Outback
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
430 on file from NHTSA, as of 2026-10-19.
By type
By component
By trouble code
Only bulletins with component: Body and frame are shown. Show all
| 13-108-25 | 2025-09-02. Service bulletin. STRUCTURE:BODY. This bulletin provides information on paint codes for vehicles in the 2026 line up. |
|---|---|
| 07-182-20R | 2021-02-01. Service bulletin. ELECTRICAL SYSTEM; LATCHES/LOCKS/LINKAGES; STRUCTURE:BODY:DOOR. This bulletin provides details regarding the cause of a whining-type sound customers may have concern about when operating their power door locks (lock and/or unlock). |
| 07-179-20 | 2020-11-05. Service bulletin. STRUCTURE:BODY:TAILGATE; EQUIPMENT; ELECTRICAL SYSTEM. This bulletin announces a design change made to the PRG control module. |
| 07-173-20 | 2020-04-02. Service bulletin. STRUCTURE:BODY:HATCHBACK/LIFTGATE; ELECTRICAL SYSTEM; LATCHES/LOCKS/LINKAGES. This Service Information Bulletin provides insight on how to address a customer concern of the rear hatch, Power Rear Gate (PRG) or trunk release operating (or finding the PRG/trunk open unexpectedly after parking) without a specific input (button press) from the operator. |
| WUH-93R | 2020-01-07. Service bulletin. STRUCTURE. Subaru of America, Inc. (Subaru) is recalling certain 2019 model year Legacy and Outback vehicles, due to a potential spot weld issue on the duct located below the cowl panel. A total of 2,107 U.S. vehicles will be affected by this recall, 81 of which are retailed units. |
| 10-91-19 | 2019-07-22. Service bulletin. STRUCTURE; EQUIPMENT. This bulletin announces availability of a new heater control assembly to address a small number of customer concerns about peeling of the surface finish / coating. Insufficient clearance between the heater control and the audio unit face above may cause a whitish or cloudy appearance and peeling to develop. |
| WUH-93 | 2019-07-22. Service bulletin. STRUCTURE. Subaru of America, Inc. (Subaru) is recalling certain 2019 model year Legacy and Outback vehicles, due to a potential spot weld issue on the duct located below the cowl panel. As a result, these vehicles may fail to conform to Federal Motor Vehicle Safety Standards. A total of 2,107 U.S. vehicles will be affected by this recall. |
| WUH-93R | 2019-07-18. Service bulletin. STRUCTURE. Subaru of America, Inc. (Subaru) is recalling certain 2019 model Legacy and Outback vehicles, due to a potential spot weld issue on the duct located below the cowl panel. A total of 2,107 U.S. vehicles will be affected by this recall, 81 of which are retailed units. |
| 12-252-18 | 2018-12-10. Service bulletin. STRUCTURE:FRAME AND MEMBERS; EQUIPMENT ADAPTIVE/MOBILITY; STRUCTURE:BODY. This Service Information bulletin announces a procedure change for installation of the under-body grommets used to seal the tie-down holes used during vehicle transport. Previously, the grommetswere supplied with the vehicle and placed in the glove box to be installed as part of the pre-delivery inspection (PDI) procedure. Recently, all carriers transporting vehicles from SIA began using individual wheel tie-downs instead of the chain-type tie-downs. As a result, these under-body grommets are now installed during vehicle assembly. |
| 12-252-18 | 2018-12-10. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY; STRUCTURE:FRAME AND MEMBERS. This Service Information bulletin announces a procedure change for installation of the under-body grommets used to seal the tie-down holes used during vehicle transport. Previously, the grommetswere supplied with the vehicle and placed in the glove box to be installed as part of the pre-delivery inspection (PDI) procedure. Recently, all carriers transporting vehicles from SIA began using individual wheel tie-downs instead of the chain-type tie-downs. As a result, these under-body grommets are now installed during vehicle assembly. |
| 13-101-18 | 2018-08-20. Service bulletin. STRUCTURE. Various paint manufacturers designate their own stock numbers and coding information although many of the major suppliers are now using the SOA paint codes to help eliminate possible confusion. Their color formulations are updated on a continual basis. Some vendors may have different color names than those provided to them by SOA. Be sure to double-check the codes and formulas beforehand to help insure an accurate color match. Should discrepancies arise, please refer your Body Shop contact inquiries to the specific paint vendor or their jobber / supplier for the most updated formula information. |
The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.