Service bulletins for the 2015 Subaru Impreza
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
421 on file from NHTSA, as of 2026-10-19.
By type
By component
By trouble code
| 07-119-17 | 2017-09-14. Service bulletin. EXTERIOR LIGHTING. This Service Information bulletin announces a production method change to the rear combination lamp assembly. The application procedure of the anti-fog coating was changed to prevent a customer concern of visible drip marks (or streaks) appearing on the inside of the lamp lens. |
|---|---|
| 06-55-16R | 2017-09-14. Service bulletin. EXTERIOR LIGHTING:BRAKE LIGHTS. This bulletin announces a design change to the brake light switch (BLS) to reduce the possibility of improper illumination of the ABS and/or VDC warning lamp. In the event a product containing silicone is used to lubricate the BLS or for other purposes in the area around the switch, a non-conductive coating may develop over time on the internal electrical contacts and affect operation of the switch. On / Off signal output from the BLS is critical for proper operation of various systems on the vehicle. When the switch does not operate properly, warning lamps illuminate and DTCs are stored. A table with BLS-related DTCs and additional information is provided in the Service Procedure information. A photo of the switch changes is shown below. This bulletin also provides a diagnostic and adjustment procedure to be used when diagnosing brake light switch-related DTCs. |
| 02-168-17 | 2017-09-14. Service bulletin. ENGINE AND ENGINE COOLING:ENGINE:GASOLINE:BELTS AND ASSOCIATED PULLEYS; ENGINE. This Service Information bulletin announces a material change to the engine accessory drive / v-belt made to address customer concerns of a slipping belt (squeal or chirping) sound. |
| 02-166-17R | 2017-09-14. Service bulletin. ENGINE AND ENGINE COOLING. This bulletin outlines design changes made to the upper oil pan assembly on FA and FB engines used on the models listed above. There have been isolated cases where the sealer used between the upper oil pan and the crankcase has become displaced resulting in engine oil seepage. Revisions made to the upper oil pan casting: * The mating flange thickness of the casting in the area identified as the cause for the seepage has been increased by 5.5mm. (See images provided in the Parts Information section below.) This thickness increase creates the need for a longer bolt to provide proper tightening and retention. * An additional mounting point has been added to the ribbing inside the casting to increase retention of the steel baffle plate and eliminate vibration. |
| 15-198-16R | 2017-08-14. Service bulletin. EQUIPMENT:ELECTRICAL:NAVIGATIONAL SYSTEM(GLOBAL POSITIONING SYSTEM); EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC.; ELECTRICAL SYSTEM:SOFTWARE. This bulletin announces reprogramming file availability and the software installation procedure to address a group of operational concerns received from the field listed below involving "Gen 2" F10 Navigation and Display Audio units with 7" display. The procedure will involve downloading the applicable software update files from Subarunet then loading them onto a flash drive for audio unit installation. It is important to read through and understand this information completely before proceeding. |
| 12-206-16 | 2017-08-14. Service bulletin. SEATS. All Models Listed with Seat Lifter Feature. This bulletin provides a procedure to address a customer reported cosmetic condition of surface rust appearing on the inner seat cushion frame of the front seat assemblies. |
| 12-189-15R | 2017-08-14. Service bulletin. STRUCTURE. This bulletin provides information about changes made to the rear shelf trim to address customer concerns of a rattling sound heard while driving over bumpy / rough roads. The sources of the rattle have been identified as: * the mounting points for the center stop lamp where it fits into the package shelf * the package shelf itself rattling against the inside of the rear glass * the rib and/or stand portions located on the underside of the package shelf contacting the shelf portion of the vehicle body. |
| 12-203-16 | 2017-08-14. Service bulletin. SEAT BELTS. This bulletin provides a procedure to address customer concerns of a squeaking sound originating from where the front seat belt buckle assembly attaches to the seat frame. A design change was made to the wave washer used at the attachment point to eliminate the sound. The sound can be heard when moving the buckle assembly side to side. |
| 16-102-16 | 2017-08-14. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION. TSB: All Models Equipped with CVT Transmissions. This Service Information bulletin provides a new flow chart and additional diagnostic tools to assist Technicians with troubleshooting DTC P0841- SECONDARY OIL PRESSURE SENSOR PERFORMANCE. |
| 15-205-16R | 2017-08-14. Service bulletin. EQUIPMENT:ELECTRICAL:NAVIGATIONAL SYSTEM(GLOBAL POSITIONING SYSTEM); ELECTRICAL SYSTEM:SOFTWARE. This bulletin announces new reprogramming file availability and the software installation procedure to address additional operational concerns received from the field and listed below involving "Gen 2" F10 Navigation and Display Audio units with 7" display. The procedure will involve downloading the applicable software update files from Subarunet then loading them onto a flash drive for audio unit installation. It is important to read through and understand this information completely before proceeding. These latest software updates contain new logic to address the following concerns: * Mirrorlink 1.1 updates * Enable Mute function for Navigation guidance * Incomplete display of intersection names in combination meter * Increased accuracy of the XM Traffic information displayed * Intermittent delay (approximately 1 minute) in display of map information after initial start-up of Navigation function (2015MY Legacy and Outback only). |
| 02-166-17 | 2017-08-14. Service bulletin. ENGINE AND ENGINE COOLING. This bulletin outlines design changes made to the upper oil pan assembly on FA and FB engines used on the models listed above. There have been isolated cases where the sealer used between the upper oil pan and the crankcase has become displaced resulting in engine oil seepage. |
| 02-164-16 | 2017-08-14. Service bulletin. ENGINE AND ENGINE COOLING. This Service Information bulletin announces a design change to the internal contact portion of the oil pressure switch to increase durability |
| 09-64-16 | 2017-08-14. Service bulletin. FUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY. This Service Information bulletin announces a change to the shape of the rubber cap used on the flange nuts securing the sub-level sending unit to the fuel tank. In addition, two of the caps are now used in production instead of only one. This change was made to enhance productivity during vehicle assembly. |
| 12-195-15 | 2017-03-08. Service bulletin. STRUCTURE:BODY:DOOR; VISIBILITY:REARVIEW MIRRORS/DEVICES:EXTERIOR. SHOULD YOU RECEIVE A CUSTOMER CONCERN OF VIBRATION OR LOOSENESS IN EITHER OF THE DOOR MIRRORS, A DESIGN CHANGE HAS BEEN MADE TO THE 3 MIRROR HEAD MOUNTING HOLES IN THE MOUNTING BASE. IN ADDITION, A NEW RETAINING BOLT AND TIGHTENING TORQUE SPECIFICATION ARE NOW USED TO SECURE THE MIRROR HEAD TO THE MOUNTING BASE. THIS BULLETIN PROVIDES A PROCEDURE FOR REPAIRING THE EXISTING MIRROR ASSEMBLY BY REPLACING THE THREE MOUNTING SCREWS WITH UPDATED FASTENERS. NOTE: REFER TO TSB 12-152-13 DATED 6/17/2013 FOR RELATED INFORMATION ON BRZ MODELS. |
| 02-157-14R | 2017-03-08. Service bulletin. EQUIPMENT; ENGINE. THIS BULLETIN ANNOUNCES INFORMATION REGARDING A MAJOR CHANGE TO THE REPAIR PROCEDURES PREVIOUSLY OUTLINED IN SERVICE BULLETINS 02-143-13R, 02-144-13R AND 02-145-13R. THESE BULLETINS PROVIDED A REPAIR PROCEDURE FOR THE REPLACEMENT OF THE PISTON RINGS TO ADDRESS VERIFIED CONCERNS OF UNUSUAL ENGINE OIL CONSUMPTION. VEHICLES CONFIRMED AS HAVING THIS CONDITION WHICH ARE WITHIN THE SUPPLIED VIN RANGES WILL NO LONGER BE REPAIRED WITH PISTON RING REPLACEMENT. THE REVISED REPAIR PROCEDURE TO ADDRESS VERIFIED UNUSUAL OIL CONSUMPTION CONCERNS ON THESE SPECIFIC VEHICLES WILL CONSIST OF REPLACING THE ENGINE SHORT BLOCK ASSEMBLY. |
| PM07 | 2017-03-08. Service bulletin. EQUIPMENT. 2015 IMPREZA ACCESSORY BROCHURE INCORRECT PART NUMBER |
| PM06 | 2017-03-07. Service bulletin. EQUIPMENT. ACCESSORY: ANTI-SLIP MAT - LIMITED AVAILABILITY |
| PM02 | 2017-03-07. Service bulletin. EQUIPMENT; STRUCTURE:BODY:HOOD. 2015 IMPREZA/CROSSTREK HOOD PROTECTOR APPLICABILITY |
| SM03 | 2017-03-07. Service bulletin. EQUIPMENT. SERVICE MEMO - 2015 IMPREZA AND XV CROSSTREK SPECIAL SERVICE TOOLS AND EQUIPMENT |
| 10-83-15 | 2017-03-06. Service bulletin. EQUIPMENT:APPLIANCE:AIR CONDITIONER. THIS SERVICE INFORMATION BULLETIN PROVIDES PRECAUTIONS TO USE WHEN REMOVING THE HVAC CONTROL PANEL TO PREVENT DAMAGING THE BLOWER FAN SPEED SWITCH. WHEN REMOVING THE CONTROL PANEL, IF THE FAN SPEED SWITCH WIRING HARNESS IS PULLED TAUGHT OR BECOMES STRESSED, THE SWITCH MAY BE DAMAGED. IF THE CONNECTOR (LOWER) PORTION OF THE SWITCH BECOMES SEPARATED FROM THE SWITCH BODY EVEN SLIGHTLY (SEE FIG. 1 ON PAGE 2), THE HVAC CONTROL PANEL ASSEMBLY MUST BE REPLACED. THE SWITCH ITSELF IS NOT SERVICEABLE. NOTE: FOR 2012MY IMPREZA, SEE TSB 10-78-12, DATED 4/18/2012. |
| 02-157-14R | 2017-03-06. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL; ENGINE. THIS BULLETIN ANNOUNCES INFORMATION REGARDING A MAJOR CHANGE TO THE REPAIR PROCEDURES PREVIOUSLY OUTLINED IN SERVICE BULLETINS 02-143-13R, 02-144-13R AND 02-145-13R. THESE BULLETINS PROVIDED A REPAIR PROCEDURE FOR THE REPLACEMENT OF THE PISTON RINGS TO ADDRESS VERIFIED CONCERNS OF UNUSUAL ENGINE OIL CONSUMPTION. VEHICLES CONFIRMED AS HAVING THIS CONDITION WHICH ARE WITHIN THE SUPPLIED VIN RANGES WILL NO LONGER BE REPAIRED WITH PISTON RING REPLACEMENT. THE REVISED REPAIR PROCEDURE TO ADDRESS VERIFIED UNUSUAL OIL CONSUMPTION CONCERNS ON THESE SPECIFIC VEHICLES WILL CONSIST OF REPLACING THE ENGINE SHORT BLOCK ASSEMBLY. |
| 02-157-14R | 2017-03-06. Service bulletin. ENGINE. THIS BULLETIN ANNOUNCES INFORMATION REGARDING A MAJOR CHANGE TO THE REPAIR PROCEDURES PREVIOUSLY OUTLINED IN SERVICE BULLETINS 02-143-13R, 02-144-13R AND 02-145-13R. THESE BULLETINS PROVIDED A REPAIR PROCEDURE FOR THE REPLACEMENT OF THE PISTON RINGS TO ADDRESS VERIFIED CONCERNS OF UNUSUAL ENGINE OIL CONSUMPTION. VEHICLES CONFIRMED AS HAVING THIS CONDITION WHICH ARE WITHIN THE SUPPLIED VIN RANGES WILL NO LONGER BE REPAIRED WITH PISTON RING REPLACEMENT. THE REVISED REPAIR PROCEDURE TO ADDRESS VERIFIED UNUSUAL OIL CONSUMPTION CONCERNS ON THESE SPECIFIC VEHICLES WILL CONSIST OF REPLACING THE ENGINE SHORT BLOCK ASSEMBLY. |
| 06-51-15R | 2017-03-06. Service bulletin. SERVICE BRAKES. THIS BULLETIN ANNOUNCES AVAILABILITY OF A NEW FRONT DISC BRAKE PAD, SHIM, GREASE AND CLIP KIT DESIGNED TO REDUCE CUSTOMER CONCERNS OF EXCESSIVE BRAKE SQUEAL. THIS NEW KIT ELIMINATES THE “SLOTTED” SHIM WHICH PREVIOUSLY WAS INSTALLED BETWEEN THE RUBBER-COATED OUTER SHIM AND THE BRAKE PAD. |
| 12-194-15 | 2017-03-06. Service bulletin. EQUIPMENT. THIS BULLETIN ANNOUNCES A DESIGN CHANGE TO THE FRONT BUMPER CORNER MOUNTING BRACKET TO ADDRESS CONCERNS OF A GAP BETWEEN THE TOP EDGE OF THE COVER AND THE HEADLAMP ASSEMBLY AS SHOWN BELOW. |
| 16-97-15 | 2017-03-06. Service bulletin. POWER TRAIN:CLUTCH ASSEMBLY. THIS BULLETIN PROVIDES A PROCEDURE FOR DIAGNOSING A CUSTOMER CONCERN OF A DELAYED AND / OR HARSH ENGAGEMENT OF THE CVT (MODEL TR580) WHEN SHIFTING INTO REVERSE OR DRIVE FROM NEUTRAL. ALL 2013-16MY, 4-CYLINDER, N/A MODELS WITH CVT |
The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.