WenmarOpen by Wenmar Pro

Service bulletins for the 2015 Subaru Forester

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

502 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

Only bulletins with component: Lighting are shown. Show all

Bulletins, newest first
07-59-07R2025-01-03. Service bulletin. EXTERIOR LIGHTING; ELECTRICAL SYSTEM. This bulletin is for information purposes only.The bulletin adresses design changes of the headlamps and rear combination lamps, where moisture and or condensation may develop on the inside of the lamp lenses.
15173142023-04-24. Service bulletin. EXTERIOR LIGHTING. Exterior Auto Dim Mirrors with Approach Lighting
WUE-90 tool2019-08-06. Service bulletin. EXTERIOR LIGHTING:BRAKE LIGHTS; ELECTRICAL SYSTEM; EXTERIOR LIGHTING; EXTERIOR LIGHTING:BRAKE LIGHTS:SWITCH. SOA has received multiple requests for additional 83399Fj000rt BRAKE LIGHT SWITCH tools and now has sufficient stock to allow retailers to place orders for single tools.
WUE-902019-05-28. Service bulletin. EXTERIOR LIGHTING:BRAKE LIGHTS:SWITCH. Subaru of America, Inc. (Subaru) is recalling certain Crosstrek, Forester, Impreza, and WRX vehicles to replace the brake lamp switch. A total of 1,303,530 U.S. vehicles will be affected by this recall.
WUE-90R2019-05-20. Service bulletin. EXTERIOR LIGHTING:BRAKE LIGHTS. Subaru of America, Inc. (Subaru) is recalling certain Crosstrek, Forester, Impreza, and WRX vehicles to replace the brake lamp switch. A total of 1,303,530 U.S. vehicles will be affected by this recall.
07-128-18R2018-11-05. Service bulletin. EXTERIOR LIGHTING:BRAKE LIGHTS:SWITCH. This Service Information bulletin provides a measurement and adjustment procedure for the stop lamp switch. An improperly adjusted (or faulty) stop lamp switch can cause any of the DTCs listed above to set and result in the related system?s warning lamp to illuminate.
07-92-15R2018-04-02. Service bulletin. EXTERIOR LIGHTING:TAIL LIGHTS. This Service Information bulletin announces a design change to the rear combination lamps to address customer concerns of fogging or condensation accumulating on the inside surface of the lens. Six additional breathing holes have been added to the body of the lamp assembly. The additional holes are intended to provide additional ventilation and prevent fogging which may result when severe ambient temperature changes occur. NOTE: Fogging is a natural phenomenon and not a defect or malfunction.
06-55-16R2018-04-02. Service bulletin. EXTERIOR LIGHTING:BRAKE LIGHTS. EXCLUDES HYBRID MODELS. This bulletin announces a design change to the brake light switch (BLS) to reduce the possibility of improper illumination of the ABS and/or VDC warning lamp. In the event a product containing silicone is used to lubricate the BLS or for other purposes in the area around the switch, a non-conductive coating may develop over time on the internal electrical contacts and affect operation of the switch. On / Off signal output from the BLS is critical for proper operation of various systems on the vehicle. When the switch does not operate properly, warning lamps illuminate and DTCs are stored. A table with BLS-related DTCs and additional information is provided in the Service Procedure information. A photo of the switch changes is shown below. This bulletin also provides a diagnostic and adjustment procedure to be used when diagnosing brake light switch-related DTCs.
07-128-18R2018-03-13. Service bulletin. SERVICE BRAKES, HYDRAULIC:PEDALS AND LINKAGES; EXTERIOR LIGHTING:BACK UP LIGHTS. This Service Information bulletin provides a measurement and adjustment procedure for the stop lamp switch. An improperly adjusted (or faulty) stop lamp switch can cause any of the DTCs listed above to set and result in the related system?s warning lamp to illuminate.
06-55-16R2017-10-27. Service bulletin. EXTERIOR LIGHTING; SERVICE BRAKES. (ALL EXCEPT Hybrid Models) REVISED This bulletin announces a design change to the brake light switch (BLS) to reduce the possibility of improper illumination of the ABS and/or VDC warning lamp. In the event a product containing silicone is used to lubricate the BLS or for other purposes in the area around the switch, a non-conductive coating may develop over time on the internal electrical contacts and affect operation of the switch. On / Off signal output from the BLS is critical for proper operation of various systems on the vehicle. When the switch does not operate properly, warning lamps illuminate and DTCs are stored. A table with BLS-related DTCs and additional information is provided in the Service Procedure information. A photo of the switch changes is shown below. This bulletin also provides a diagnostic and adjustment procedure to be used when diagnosing brake light switch-related DTCs.
06-55-16R2017-09-14. Service bulletin. EXTERIOR LIGHTING:BRAKE LIGHTS. This bulletin announces a design change to the brake light switch (BLS) to reduce the possibility of improper illumination of the ABS and/or VDC warning lamp. In the event a product containing silicone is used to lubricate the BLS or for other purposes in the area around the switch, a non-conductive coating may develop over time on the internal electrical contacts and affect operation of the switch. On / Off signal output from the BLS is critical for proper operation of various systems on the vehicle. When the switch does not operate properly, warning lamps illuminate and DTCs are stored. A table with BLS-related DTCs and additional information is provided in the Service Procedure information. A photo of the switch changes is shown below. This bulletin also provides a diagnostic and adjustment procedure to be used when diagnosing brake light switch-related DTCs.
06-46-14R2017-03-03. Service bulletin. EXTERIOR LIGHTING:BRAKE LIGHTS. THIS BULLETIN PROVIDES A REVISED ADJUSTMENT PROCEDURE TO BE USED WHEN DIAGNOSING BRAKE LIGHT SWITCH (BLS) -RELATED DTCS C1531 AND/OR C0054. IF THE BLS IS OUT OF ADJUSTMENT, THE ABS AND/OR VDC WARNING LAMP MAY ILLUMINATE.
07-92-152017-02-16. Service bulletin. EXTERIOR LIGHTING:TAIL LIGHTS. THIS SERVICE INFORMATION BULLETIN ANNOUNCES A DESIGN CHANGE TO THE REAR COMBINATION LAMPS TO ADDRESS CUSTOMER CONCERNS OF FOGGING OR CONDENSATION ACCUMULATING ON THE INSIDE SURFACE OF THE LENS. SIX ADDITIONAL BREATHING HOLES HAVE BEEN ADDED TO THE BODY OF THE LAMP ASSEMBLY. THE ADDITIONAL HOLES ARE INTENDED TO PROVIDE ADDITIONAL VENTILATION AND PREVENT FOGGING WHICH MAY RESULT WHEN SEVERE AMBIENT TEMPERATURE CHANGES OCCUR. NOTE: FOGGING IS A NATURAL PHENOMENON AND NOT A DEFECT OR MALFUNCTION.
06-46-142016-11-21. Service bulletin. EXTERIOR LIGHTING:BRAKE LIGHTS:SWITCH. REVISED BRAKE LIGHT SWITCH ADJUSTMENT PROCEDURE FOR DTCS C1531 AND C0054

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.