WenmarOpen by Wenmar Pro

Service bulletin 07-128-18R

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

The communication, as NHTSA indexes it (as of 2026-10-19)
TypeService bulletin
NHTSA id10146480
Published by NHTSA2018-11-05
Manufacturer's number07-128-18R
Manufacturer's date2018-09-18
NHTSA componentEXTERIOR LIGHTING:BRAKE LIGHTS:SWITCH

NHTSA's summary

This Service Information bulletin provides a measurement and adjustment procedure for the stop lamp switch. An improperly adjusted (or faulty) stop lamp switch can cause any of the DTCs listed above to set and result in the related system?s warning lamp to illuminate.

The document

The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.

Components

Lighting, Brake lights

Vehicles listed
SUBARU BRZ2013, 2014, 2015, 2016, 2017
SUBARU CROSSTREK2013 to 2015
SUBARU CROSSTREK2016, 2017
SUBARU FORESTER2014, 2015, 2016
SUBARU IMPREZA2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
SUBARU WRX2015, 2016, 2017

Listing a model year does not mean every vehicle of it is concerned: the document says which.

Recalls for the same vehicles and component
19V1490002019-02-28. EXTERIOR LIGHTING:BRAKE LIGHTS:SWITCH
15V3660002015-06-12. FORWARD COLLISION AVOIDANCE: CRASH IMMINENT BRAKING; EXTERIOR LIGHTING:BRAKE LIGHTS:SWITCH

A recall listed here may apply to some of the same vehicles. Only the manufacturer can say whether it applies to one vehicle.

Other bulletins for the same vehicles and component
TechTIPS2023-05-08. Service bulletin. Subaru Service and Technical Support Line Newsletter
WUE-90 tool2019-08-06. Service bulletin. SOA has received multiple requests for additional 83399Fj000rt BRAKE LIGHT SWITCH tools and now has sufficient stock to allow retailers to place orders for single tools.
WUE-902019-05-28. Service bulletin. Subaru of America, Inc. (Subaru) is recalling certain Crosstrek, Forester, Impreza, and WRX vehicles to replace the brake lamp switch. A total of 1,303,530 U.S. vehicles will be affected by this recall.
WUE-90R2019-05-20. Service bulletin. Subaru of America, Inc. (Subaru) is recalling certain Crosstrek, Forester, Impreza, and WRX vehicles to replace the brake lamp switch. A total of 1,303,530 U.S. vehicles will be affected by this recall.
06-55-16R2018-04-02. Service bulletin. EXCLUDES HYBRID MODELS. This bulletin announces a design change to the brake light switch (BLS) to reduce the possibility of improper illumination of the ABS and/or VDC warning lamp. In the event a product containing silicone is used to lubricate the BLS or for other purposes in the area around the switch, a non-conductive coating may develop over time on the internal electrical contacts and affect operation of the switch. On / Off signal output from the BLS is critical for proper operation of various systems on the vehicle. When the switch does not operate properly, warning lamps illuminate and DTCs are stored. A table with BLS-related DTCs and additional information is provided in the Service Procedure information. A photo of the switch changes is shown below. This bulletin also provides a diagnostic and adjustment procedure to be used when diagnosing brake light switch-related DTCs.
06-55-16R2017-09-14. Service bulletin. This bulletin announces a design change to the brake light switch (BLS) to reduce the possibility of improper illumination of the ABS and/or VDC warning lamp. In the event a product containing silicone is used to lubricate the BLS or for other purposes in the area around the switch, a non-conductive coating may develop over time on the internal electrical contacts and affect operation of the switch. On / Off signal output from the BLS is critical for proper operation of various systems on the vehicle. When the switch does not operate properly, warning lamps illuminate and DTCs are stored. A table with BLS-related DTCs and additional information is provided in the Service Procedure information. A photo of the switch changes is shown below. This bulletin also provides a diagnostic and adjustment procedure to be used when diagnosing brake light switch-related DTCs.
12-200-16R2017-08-14. Service bulletin. Rear Combination Lamp and Related Enhancements - Since the introduction of the BRZ, there have been a number of revisions to the rear combination lamps and their sealing gaskets (a.k.a. packing) to address varying customer concerns. Conditions ranging from the accumulation of water and condensation, to insect intrusion and lens / body cracking have all been addressed in previous bulletins. Recently, concerns about a cloudy appearance of the lens have created yet another bulletin. To help better organize these publications, all the related bulletins are being been condensed into this new release putting all the information in one place for easier reference.
12-162-14R2017-08-14. Service bulletin. Design Change to Rear Combination Lamps to Prevent Insect Intrusion - IMPORTANT NOTE: Due to the number of revisions made and to make the information contained in TSBs 12-131-12R, 12-145-13R, 12-160-13 and 12-162-14 easier to use, these TSBs have been combined into TSB 12-200-16R dated 3/6/2017.
12-160-13R2017-08-14. Service bulletin. Cracked Rear Combination Lamps - IMPORTANT NOTE: Due to the number of revisions made and to make the information contained in TSBs 12-131-12R, 12-145-13R, 12-160-13 and 12-162-14 easier to use, these TSBs have been combined into TSB 12-200-16R dated 3/6/2017.
12-145-13R2017-08-14. Service bulletin. Condensation in Rear Combination Lamps, Retaining Nut and Sealing Gasket Change - IMPORTANT NOTE: Due to the number of revisions made and to make the information contained in TSBs 12-131-12R, 12-145-13R, 12-160-13 and 12-162-14 easier to use, these TSBs have been combined into TSB 12-200-16R dated 3/6/2017.