Service bulletins for the 2017 Subaru Crosstrek
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
338 on file from NHTSA, as of 2026-10-19.
By type
By component
By trouble code
By topic
Only bulletins with component: Body and frame are shown. Show all
| 13-108-25 | 2025-09-02. Service bulletin. STRUCTURE:BODY. This bulletin provides information on paint codes for vehicles in the 2026 line up. |
|---|---|
| 12-224-17R | 2021-02-18. Service bulletin. STRUCTURE. This bulletin provides a procedure for replacement of the black foam rubber insulating cushions for the roof rails. |
| 12-296-20R | 2020-12-05. Service bulletin. EQUIPMENT; SUSPENSION; STRUCTURE:FRAME AND MEMBERS; EQUIPMENT ADAPTIVE/MOBILITY. This Service Information Bulletin outlines design changes made to the rear frame section weld nuts and the mounting bolts used to secure the rear stabilizer bar brackets. |
| 12-284-20 | 2020-04-03. Service bulletin. EQUIPMENT; LATCHES/LOCKS/LINKAGES; STRUCTURE:BODY:DOOR. This bulletin announces availability of new interior door handles which will address isolated concerns of the chrome finish peeling. |
| 05-69-19 | 2019-08-06. Service bulletin. STRUCTURE; SUSPENSION. This Service Information Bulletin announces a change made to the rear subframe retaining bolts used on the models listed above. The design changes provide the bolt with an increased durability against rust. |
| 12-251-18 | 2018-12-10. Service bulletin. LATCHES/LOCKS/LINKAGES; STRUCTURE:BODY. This bulletin provides a service procedure to address a gap between the top edge of the door and the instrument panel on the models listed as shown in the photo below. The gap may also make the glove box door difficult to close fully.There is a latch to keep the glove box closed on both sides of the glove box door. If the door is closed without using enough force to engage both latches or by pushing it shut on just one side instead of in the middle, one may close and not the other. Over time, if the door is not fully closed with both latches, high cabin temperatures along with weight of the items inside the glove box may cause the assembly to deform slightly and a gap to develop. |
| 12-251-18 | 2018-12-10. Service bulletin. ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL; STRUCTURE:BODY; STRUCTURE:FRAME AND MEMBERS. This bulletin provides a service procedure to address a gap between the top edge of the door and the instrument panel on the models listed as shown in the photo below. The gap may also make the glove box door difficult to close fully.There is a latch to keep the glove box closed on both sides of the glove box door. If the door is closed without using enough force to engage both latches or by pushing it shut on just one side instead of in the middle, one may close and not the other. Over time, if the door is not fully closed with both latches, high cabin temperatures along with weight of the items inside the glove box may cause the assembly to deform slightly and a gap to develop. |
| 12-231-18R | 2018-06-11. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY; STRUCTURE. This bulletin announces a design change to the air vent grille located in the lower portion of the trunk (or cargo) area. The shutters of the vent grille are designed to open briefly and relieve cabin pressure when the doors are shut with the windows fully closed. The vent grilles have rubber ?shutters? which occasionally, may catch on the frame (case) portion and not close properly allowing outside air / odor to enter the cabin. |
| 12-231-18R | 2018-06-11. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY; STRUCTURE; STRUCTURE:FRAME AND MEMBERS. This bulletin announces a design change to the air vent grille located in the lower portion of the trunk (or cargo) area. The shutters of the vent grille are designed to open briefly and relieve cabin pressure when the doors are shut with the windows fully closed. The vent grilles have rubber ?shutters? which occasionally, may catch on the frame (case) portion and not close properly allowing outside air / odor to enter the cabin. |
| 12-231-18 | 2018-03-13. Service bulletin. STRUCTURE:BODY. ( 2017-2018MY Impreza - 5 Dr Only) |
| 12-224-17R | 2017-09-14. Service bulletin. STRUCTURE:BODY:ROOF AND PILLARS. This bulletin provides a procedure for replacement of the black foam rubber insulating cushions for the roof rails. In rare cases, the cushion(s) may come loose and begin to protrude from under the roof rails where they contact the body. |
The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.