WenmarOpen by Wenmar Pro

Service bulletins for the 2025 Ram 1500

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

589 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Only bulletins with component: Driver assistance are shown. Show all

Bulletins, newest first
1117852026-06-16. Service bulletin. LANE DEPARTURE: ASSIST; LANE DEPARTURE: WARNING. MODULE - CENTRAL ADAS DECISION and DRIVER MONITORING
08-166-262026-04-22. Service bulletin. LANE DEPARTURE: ASSIST. Rear Mid Range Radar (MRR) Bracket Revision Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must SYMPTOM: exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● C00C4-76 - Rear Radar Module "A" - Wrong Mounting Position. ● C00C5-76 - Rear Radar Module "B" - Wrong Mounting Position. Customers may also comment on the following: ● Blind Spot Warning indicator displayed on the Instrument Panel Cluster (IPC). This bulletin involves replacing the right and left side rear MRR brackets.
S26230000242026-04-15. Service bulletin. LANE DEPARTURE: ASSIST. U0422-00 Implausible Data From BCM Set In Central ADAS Decision Module (CADM).
1032882025-03-04. Service bulletin. LANE DEPARTURE: BLIND SPOT DETECTION. CAMERA - REAR VIEW
91004802025-01-16. Service bulletin. BACK OVER PREVENTION: WARNINGS. Park Sensor Vehicles can have a warning in the cluster indicating that the park sensors are inoperative and to wipe the park sensors. If the sensors are clean and the message is still present there are 2 items that need to be checked - 1. Verify that the decoupling ring, the thin rubber ring directly around each park sensor, is not rolled or pinched. If an edge is rolled it can put excessive pressure on the sensor and cause the module to think that the sensor is blocked. 2. Verify the PAM PN. If the PN is 56029962AH, then the s/w is old and requires an update to at least 56029962AI level to fix the issue. If the PAM PN is 56029962AH please update it to the latest available PN.
91004792025-01-15. Service bulletin. BACK OVER PREVENTION: WARNINGS. Park Sensor Vehicles can have a warning in the cluster indicating that the park sensors are inoperative and to wipe the park sensors. If the sensors are clean and the message is still present there are 2 items that need to be checked - 1. Verify that the decoupling ring, the thin rubber ring directly around each park sensor, is not rolled or pinched. If an edge is rolled it can put excessive pressure on the sensor and cause the module to think that the sensor is blocked. 2. Verify the PAM PN. If the PN is 56029962AH, then the s/w is old and requires an update to at least 56029962AI level to fix the issue. If the PAM PN is 56029962AH please update it to the latest available PN
S25230000012025-01-09. Service bulletin. BACK OVER PREVENTION: REARVIEW SYSTEM BRAKING; LANE DEPARTURE: BLIND SPOT DETECTION; BACK OVER PREVENTION: WARNINGS. C00C4-97 And Or C00C5-97 - Rear Radar Module Component Or System Operation Obstructed Or Blocked.
S24230000492024-11-18. Service bulletin. BACK OVER PREVENTION: WARNINGS; BACK OVER PREVENTION: REARVIEW SYSTEM BRAKING; LANE DEPARTURE: BLIND SPOT DETECTION; UNKNOWN OR OTHER. Blind Spot Warning Displayed On Instrument Cluster. Mid Range Radar Left And Or Right Setting C00C4-76 C00C5-76 Rear Radar Module Wrong Mounting Position.
91004142024-09-26. Service bulletin. BACK OVER PREVENTION: WARNINGS. Parking assist Vehicles can have a warning in the cluster indicating that the park sensors are inoperative and to wipe the park sensors. If the sensors are clean and the message is still present there are 2 items that need to be checked - 1. Verify that the decoupling ring, the thin rubber ring directly around each park sensor, is not rolled or pinched. If an edge is rolled it can put excessive pressure on the sensor and cause the module to think that the sensor is blocked. 2. Verify the PAM PN. If the PN is 56029962AH, then the s/w is old and requires an update to at least 56029962AI level to fix the issue. If the PAM PN is 56029962AH please update it to the latest available PN.
S24080000692024-07-08. Service bulletin. FORWARD COLLISION AVOIDANCE: WARNINGS; UNKNOWN OR OTHER; ELECTRICAL SYSTEM. When Selecting Front Camera View Option, No Display Appears
S24080000642024-07-02. Service bulletin. LANE DEPARTURE: BLIND SPOT DETECTION; ELECTRICAL SYSTEM. Blind Spot Warning Message Displayed on the Cluster
08-123-242024-06-07. Service bulletin. ELECTRICAL SYSTEM; BACK OVER PREVENTION: WARNINGS. "Flash: Park Assist Module (PAM) Updates Customers may experience the following: ● A pop-up on the Instrument Panel Cluster (IPC) telling customer to wipe off the Park Assist Sensors (PAS), even though nothing is actually on the sensors. When this IPC pop-up is present, the front Parksense feature is disabled Fig. 1. This bulletin involves reprogramming the PAM with the latest software available."

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.