WenmarOpen by Wenmar Pro

Service bulletins for the 2021 Peterbilt 367

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

52 on file from NHTSA, as of 2026-10-19.

By type

By component

By topic

Only bulletins with component: Body and frame are shown. Show all

Bulletins, newest first
02-1692022-07-01. Service bulletin. ELECTRICAL SYSTEM; STRUCTURE. Info Only - Chassis equipped with a flush mounted battery box between the frame rails, and containing 3 batteries, may experience battery movement on the side where the single battery resides. This bulletin contains a procedure to fabricate a bracket to hold this battery in place.
02-1682021-10-05. Service bulletin. STRUCTURE. Information Only - Rear axle Quarter Fenders with less than two inches of clearance between the top of the quarter fender and the bottom of the trailer/equipment are susceptible to damage. The lack of clearance could result in cracked/broken quarter fenders or complete separation if undetected or un-remedied.
02-1582020-09-03. Service bulletin. EQUIPMENT; STRUCTURE; EQUIPMENT ADAPTIVE/MOBILITY; ELECTRICAL SYSTEM:12V/24V/48V BATTERY. Fix as Fail: Peterbilt has determined that certain model 348, 365, 367, 382, 384, 386, 388, 389, 567, 579, and 587 trucks, built between 4/13/2010 and 3/16/2020 and equipped with a flush mounted battery box, utilized rubber washers that could rub through and cause the aluminum box mounting tabs to rub directly on the steel frame brackets. This could result in cracked battery box mounting angles. Resolution is to add the reinforcement bracket(s) to affected vehicles.
43-0672020-07-03. Service bulletin. STRUCTURE; ENGINE AND ENGINE COOLING:EXHAUST SYSTEM. Fix as Fail: For all conventional models, except 387/587, equipped with Side-of-Cab (“SOC”) exhaust and built from 03/6/2006 to 1/20/2020, the clamps that secure the SOC exhaust stacks may not be tightened properly. This may allow the exhaust stack to rotate and contact the cab or sleeper.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.