Recalls that may apply to the 2021 Peterbilt 367
A recall listed here may apply to a vehicle of this year, make and model. Only the manufacturer can say whether it applies to one vehicle: check the VIN with the official lookups.
By component
| 24V190000 | 2024-03-20. POWER TRAIN:AUTOMATIC TRANSMISSION:LEVER AND LINKAGE:COLUMN SHIFT. PACCAR Incorporated (PACCAR) is recalling certain 2021-2024 Peterbilt 365, 367, 389, 535, 536, 537, 548, 567, 579, and 2021-2025 Kenworth T180, T280, T380, T480, T680, T880 and W990 trucks. The right-hand gear shifter stalk connectors may have been improperly crimped, resulting in a loss of communication. |
|---|---|
| 21V648000 | 2021-08-19. SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:HOSES, LINES/PIPING, AND FITTINGS. PACCAR, Inc. (PACCAR) is recalling certain 2021-2022 Peterbilt 367, 389, 567, and 579 vehicles. The cross member mounted Hill Start Assist valve assembly may have insufficient clearance to the rear axle, causing damage to the rear brake hose and loss of the rear brake signal. |
| 21V391000 | 2021-05-26. FUEL SYSTEM, DIESEL:FUEL INJECTION SYSTEM:FUEL RAIL. PACCAR Incorporated (PACCAR) is recalling certain 2018-2021 Peterbilt 337, 348, 365, 367, 520, 567, Kenworth T270, T370, T440, T470, T800 and T880 vehicles. The sealing washer may not seat correctly in the pilot bore holes, allowing the high pressure fuel rail assembly to leak. |
| 21V080000 | 2021-02-17. ENGINE. PACCAR Incorporated (PACCAR) is recalling certain 2021-2022 Kenworth T680, T880, W990, T800, W900 and Peterbilt 579, 567, 389, 367 vehicles equipped with a Cummins X15 engine. The capscrews that attach the flywheel to the crankshaft may have been improperly torqued, allowing the flywheel to detach. |
| 20V506000 | 2020-08-26. POWER TRAIN:AXLE ASSEMBLY. PACCAR Incorporated (PACCAR) is recalling certain 2020-2021 Peterbilt 348, 365, 367, 389, 520, 567 and Kenworth T800, T880, W900, W990 vehicles equipped with Watson and Chalin steerable lift axle suspension systems (model SL2065). The axles may have lower rear pivot bolts that are not long enough to sufficiently engage the locking feature of the corresponding nuts. |
| 2021521 | 2021-08-20. Brakes. Issue: On certain trucks, the Hill Start Assist valve assembly could be damaged by contact with the rear axle. If this happens, there could be reduced braking or a loss of rear brakes. Safety Risk: Reduced braking or a loss of rear brakes can cause extended stopping distances and increase the risk of a crash. Corrective Actions: PACCAR will notify owners by mail and instruct you to take your truck to a dealer to inspect the clearance between the Hill Start Assist valve assembly and the rear axle. The dealer will rework the assembly if more clearance is needed. |
|---|---|
| 2021323 | 2021-05-26. Fuel System. Issue: On certain trucks, the fuel rail assembly could develop a leak. Note: This recall only affects trucks equipped with a Cummins L9 or ISX12 diesel engine. Safety Risk: A fuel leak can create the risk of a fire. Corrective Actions: Cummins will notify owners by mail and instruct you to take your truck to a Cummins authorized service center to inspect the fuel rail. If damage is found, the fuel rail and fuel lines will be replaced. If no damage is found, the fuel rail will be reassembled with new crush washers using a special tool. |
| 2021069 | 2021-02-17. Powertrain. Issue: On certain vehicles, the cap screws that attach the flywheel to the crankshaft may not have been properly tightened. As a result, the flywheel could detach. If this happens, there could be a loss of power to the wheels and parts could be ejected from the engine compartment. Safety Risk: A loss of power to the wheels could increase the risk of a crash. Parts that are ejected from the engine compartment could create a risk of injury. Corrective Actions: Cummins will notify owners by mail and instruct you to take your truck to a Cummins authorized service center to tighten the flywheel cap screws. Cummins will repair damaged components, as necessary. |
| 2020399 | 2020-08-27. Suspension. Issue: On certain trucks, the lift axle pivot bolts may be too short and may not be properly tightened. As a result, the bolts could come loose or break. If this happens, parts could fall from the truck. Note: This recall only affects trucks built with Watson Chalin SL2065 lift axles. Safety Risk: Large fasteners that fall on the road could create a road hazard for others and increase the risk of a crash. Corrective Actions: PACCAR will notify owners by mail and instruct you to take your truck to a dealer to inspect and replace the lift axle pivot bolts, as necessary. |
A campaign lists a year, a make and a model, and often only some of the vehicles built. A list with nothing on it is not a clearance either. The lookups below check one VIN.
Check one vehicle officially
Contains information licensed under the Open Government Licence – Canada.