WenmarOpen by Wenmar Pro

Service bulletins for the 2024 Mercedes-Benz CLE

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

157 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

Only bulletins with type: Service campaign are shown. Show all

Bulletins, newest first
NCU - 20260400052026-04-25. Service campaign. WHEELS; STRUCTURE:BODY. Mercedes-Benz AG (“MBAG”), the manufacturer of Mercedes-Benz vehicles, has determined that on certain Model Year (“MY”) 2025 CLE (236 platform) vehicles, the seam seal in the front left wheel arch does not meet current production specifications which could result in leaks and subsequent corrosion in that area. MBUSA will conduct a service campaign. An authorized Mercedes-Benz dealer will rework the front left wheel arch seam seal on the affected vehicles.
NCU - 20250400132026-01-31. Service campaign. ELECTRICAL SYSTEM. Mercedes-Benz AG, the manufacturer of Mercedes-Benz vehicles, has determined that on certain subject vehicles, the ME-SFI control unit software does not meet current production specifications. As a result, a check engine malfunction indicator lamp might erroneously be triggered. MBUSA will conduct a service campaign. An authorized Mercedes-Benz dealer will update the ME-SFI control unit software.
NCU-20250400132025-05-29. Service campaign. ENGINE. Mercedes-Benz AG, the manufacturer of Mercedes-Benz vehicles, has determined that on certain subject vehicles, the ME-SFI control unit software does not meet current production specifications. As a result, a check engine malfunction indicator lamp might erroneously be triggered.
20240900082024-09-23. Service campaign. VISIBILITY/WIPER. 1. Replace left door window lifter. For basic data, see AR67.39-P-0013WEC. 2. Assemble in reverse order.
NCU - 20240800032024-08-30. Service campaign. STRUCTURE:BODY. 1. Replace reinforcement sheet metal for radiator crossmember (8). For basic information, see AR62.30-P-2300WEB.
NCU - 20240700152024-08-29. Service campaign. STRUCTURE:BODY. 1. Rework paint damage using a touch-up paint pen and ensure anticorrosion protection. Observe MB specifications and manufacturer specifications. 2. Mask off transition from retaining tab to roof trim bar by means of an intermediate layer (3M protective film) prior to installation to prevent further damage when reinstalling the trim bar (B, Figure 2). 3. Assemble in reverse order.
20240600082024-06-30. Service campaign. STRUCTURE:BODY. Check/Test Procedure 1. Remove left rear inner lamp unit (E3/17, Figure 1) and right rear inner lamp unit (E4/17, Figure 1). For basic information, see AR82.10-P-4927WEC. 2. Remove the trim element (1, Figure 1) from the trunk lid (2, Figure 1). Installation: The trim element (1, Figure 1) is destroyed when you remove it and a new one has to be installed in its place. 3. Check the laser solder seam (area A, Figure 1) on the trunk lid (2, Figure 1) for cracks. Use a flashlight here to inspect for cracks. Work Procedure 1. Clean the affected area of the laser solder seam (area A, Figure 1) on the trunk lid (2, Figure 1) over a wide area. For example with silicone remover. 2. Apply activator to the affected area of the laser solder seam (area A, Figure 1) on the trunk lid (2, Figure 1). Observe manufacturer's specifications for product! 3. Seal the affected area of the laser solder seam (area A, Figure 1) on the trunk lid (2, Figure 1) with transparent seam seal. Seal approx. 2 cm over the entire crack length of the laser solder seam (area A, Figure 1). Observe manufacturer's specifications for product! 4. Install in the reverse order.
NCU - 20240400012024-05-29. Service campaign. WHEELS. Mercedes-Benz AG, the manufacturer of Mercedes-Benz vehicles, has determined that on certain MY 2023-2024 C-Class, CLE, E-Class, EQE, EQS, GLC, GLE, GLS, GT, S-Class, and SL vehicles (205, 206, 236, 213, 214, 238, 294, 295, 296, 297, 253, 167, 290, 223, 232 platform), the tire sealant bottle may not meet specifications. The possibility exists that the tire sealant bottle may leak within the installation location. MBUSA will conduct a service campaign. An authorized Mercedes-Benz dealer will replace the TIREFIT bottle in the trunk.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.