Service bulletins for the 2021 Mazda Mazda3
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
634 on file from NHTSA, as of 2026-10-19.
About B1126 on the 2021 Mazda Mazda3: what the code means, and the bulletins and recalls about the same components.
By type
By component
By trouble code
By topic
Only bulletins with trouble code: B1126 are shown. Show all
| 08-003-23a | 2023-08-03. Service bulletin. AIR BAGS. Some vehicles may exhibit that the air bag warning light turns on or repeats cycles of turning on and off with DTC B1126:13 and/or B1127:13 stored in memory. B1126:13 - Driver-side side air bag module circuit open circuit or resistance high B1127:13 - Passenger-side side air bag module circuit open circuit or resistance high This issue is caused by any of the following: When the driver or passenger moves, a load is applied to the seat back and the load may cause displacement of the mating terminals in the side air bag module connector, resulting in insufficient contact and higher resistance. The DTC detection level is too sensitive. The form of the female terminals in the side air bag module connector may cause insufficient contact and higher resistance. To eliminate these concerns, (1) the DTC detection level of the SAS control module has been optimized, (2) the design of the side air bag module connector has been modified, and (3) the layout of the side air bag module connector has been modified. |
|---|---|
| 08-003-23 | 2023-06-04. Service bulletin. AIR BAGS. Some vehicles may exhibit that the air bag warning light turns on or repeats cycles of turning on and off with DTC B1126:13 and/or B1127:13 stored in memory. |
| 08-001-22c | 2022-09-06. Service bulletin. AIR BAGS. Some vehicles may exhibit that the air bag warning light turns on or repeats cycles of turning on and off with DTC B1126:13 and/or B1127:13 stored in memory. - B1126:13 - Driver-side side air bag module circuit open circuit or resistance high - B1127:13 - Passenger-side side air bag module circuit open circuit or resistance high This issue is caused by any of the following: - When the driver or passenger moves, a load is applied to the seat back and the load may cause displacement of the mating terminals in the side air bag module connector, resulting in insufficient contact and higher resistance. - The DTC detection level is too sensitive. - The form of the female terminals in the side air bag module connector may cause insufficient contact and higher resistance. To eliminate these concerns, the DTC detection level of the SAS control module has been optimized. |
| 08-001-22b | 2022-06-04. Service bulletin. AIR BAGS. Some vehicles may exhibit that the air bag warning light turns on or repeats cycles of turning on and off with DTC B1126:13 and/or B1127:13 stored in memory. * B1126:13 - Driver-side side air bag module circuit open circuit or resistance high * B1127:13 - Passenger-side side air bag module circuit open circuit or resistance high This issue is caused by one or both of the following: * When the driver or passenger moves, a load is applied to the seat back and the load may cause displacement of the mating terminals in the side air bag module connector, resulting in insufficient contact and higher resistance. * The DTC detection level is too sensitive. To eliminate these concerns: * A modification of the harness is being developed. * The DTC detection level of the SAS control module has been optimized. |
| 08-001/22 | 2022-04-05. Service bulletin. AIR BAGS; EQUIPMENT. Some vehicles may exhibit that the air bag warning light turns on or repeats cycles of turning on and off with DTC B1126:13 and/or B1127:13 stored in memory. *B1126:13 - Driver-side side air bag module circuit open circuit or resistance high *B1127:13 - Passenger-side side air bag module circuit open circuit or resistance high This issue is caused by one or both of the following: *When the driver or passenger moves, a load is applied to the seat back and the load may cause displacement of the mating terminals in the side air bag module connector, resulting in insufficient contact and higher resistance. *The DTC detection level is too sensitive. To eliminate these concerns: *A modification of the harness is being developed. *The DTC detection level of the SAS control module has been optimized. |
The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.