B1126 on the 2021 Mazda Mazda3
The bulletins listed name this code in NHTSA's summary, or are about the same components. A bulletin or a recall listed here may apply to the model year. None of it is a diagnosis.
This code is specific to a manufacturer and is not described here. Its meaning is in the manufacturer's service information.
| 08-003-23a | 2023-08-03. Service bulletin. Some vehicles may exhibit that the air bag warning light turns on or repeats cycles of turning on and off with DTC B1126:13 and/or B1127:13 stored in memory. B1126:13 - Driver-side side air bag module circuit open circuit or resistance high B1127:13 - Passenger-side side air bag module circuit open circuit or resistance high This issue is caused by any of the following: When the driver or passenger moves, a load is applied to the seat back and the load may cause displacement of the mating terminals in the side air bag module connector, resulting in insufficient contact and higher resistance. The DTC detection level is too sensitive. The form of the female terminals in the side air bag module connector may cause insufficient contact and higher resistance. To eliminate these concerns, (1) the DTC detection level of the SAS control module has been optimized, (2) the design of the side air bag module connector has been modified, and (3) the layout of the side air bag module connector has been modified. |
|---|---|
| 08-003-23 | 2023-06-04. Service bulletin. Some vehicles may exhibit that the air bag warning light turns on or repeats cycles of turning on and off with DTC B1126:13 and/or B1127:13 stored in memory. |
| 08-001-22c | 2022-09-06. Service bulletin. Some vehicles may exhibit that the air bag warning light turns on or repeats cycles of turning on and off with DTC B1126:13 and/or B1127:13 stored in memory. - B1126:13 - Driver-side side air bag module circuit open circuit or resistance high - B1127:13 - Passenger-side side air bag module circuit open circuit or resistance high This issue is caused by any of the following: - When the driver or passenger moves, a load is applied to the seat back and the load may cause displacement of the mating terminals in the side air bag module connector, resulting in insufficient contact and higher resistance. - The DTC detection level is too sensitive. - The form of the female terminals in the side air bag module connector may cause insufficient contact and higher resistance. To eliminate these concerns, the DTC detection level of the SAS control module has been optimized. |
| 08-001-22b | 2022-06-04. Service bulletin. Some vehicles may exhibit that the air bag warning light turns on or repeats cycles of turning on and off with DTC B1126:13 and/or B1127:13 stored in memory. * B1126:13 - Driver-side side air bag module circuit open circuit or resistance high * B1127:13 - Passenger-side side air bag module circuit open circuit or resistance high This issue is caused by one or both of the following: * When the driver or passenger moves, a load is applied to the seat back and the load may cause displacement of the mating terminals in the side air bag module connector, resulting in insufficient contact and higher resistance. * The DTC detection level is too sensitive. To eliminate these concerns: * A modification of the harness is being developed. * The DTC detection level of the SAS control module has been optimized. |
| 08-001/22 | 2022-04-05. Service bulletin. Some vehicles may exhibit that the air bag warning light turns on or repeats cycles of turning on and off with DTC B1126:13 and/or B1127:13 stored in memory. *B1126:13 - Driver-side side air bag module circuit open circuit or resistance high *B1127:13 - Passenger-side side air bag module circuit open circuit or resistance high This issue is caused by one or both of the following: *When the driver or passenger moves, a load is applied to the seat back and the load may cause displacement of the mating terminals in the side air bag module connector, resulting in insufficient contact and higher resistance. *The DTC detection level is too sensitive. To eliminate these concerns: *A modification of the harness is being developed. *The DTC detection level of the SAS control module has been optimized. |
5 on file from NHTSA, as of 2026-10-19. See them in the bulletin list. A bulletin lists model years: read the document for which vehicles it concerns.