WenmarOpen by Wenmar Pro

Service bulletins for the 2025 Mazda CX-70

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

297 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Bulletins, newest first
ONP10 Dlr Ltr2025-09-04. Service campaign. UNKNOWN OR OTHER. Subject: Puerto Rico specification vehicles do not have Connected Vehicle Services (CV) Owner Notification Program ONP10 – 2025MY Mazda CX-5, Mazda3, CX-70, CX-90 Dear Mazda Dealer Colleagues, Mazda Motor Corporation has decided to conduct an Owner Notification Program (ONP) on certain 2025 Mazda Corporate and Retail Fleet vehicles. There are 199 vehicles in this campaign and no Mazda Retail vehicles in dealer stock or sold new, used or CPO are affected. Subject VIN and Production date ranges: Model and Quantity affected Subject VIN range Various non-sequential VIN’s for these models * Only specific vehicles with ONP10 listed in Warranty Vehicle Inquiry are affected Concern Outline: 199 Puerto Rico specification vehicles were sold and registered in the United States as both Corporate vehicles (75) and Rental Fleet vehicles (124). These vehicles do not have Connected Vehicle Services (CV) available, which also means these vehicles cannot be connected to the MyMazda App to use various features like remote start.
09-033-252025-09-04. Service bulletin. STRUCTURE:BODY. Some vehicles may exhibit the following behavior: If the power liftgate (PLG) encounters an obstruction during opening or closing, the jam-safe function is designed to stop the liftgate and reverse it slightly. Normally, pressing the liftgate button (dash, liftgate, or remote) after this happens should cause the liftgate to continue in the reverse direction. Due to a software issue, if the liftgate button is pressed after the jam-safe function is activated, the liftgate may instead continue moving in the direction of the obstruction. This occurs randomly and cannot be predicted. To correct this concern, the control software of the power liftgate control module has been modified to ensure the liftgate always continues in the reverse direction when the opener switch is operated immediately after the jam-safe function is activated.
09-031-252025-09-04. Service bulletin. STRUCTURE:BODY. While driving on gravel or dusty roads, dust accumulates at the lower inner edge of the door garnish. When the rear door is opened, the dust may be blown up and enter the cabin, adhering to the seats and the floor. This is caused by a large gap at the lower part of the boundary between the rear door and the front door, and air containing dust and/or sand is sucked up into the gap, accumulating at the lower edge of the rear door garnish while driving. To eliminate this concern, a mass production change is under study.
09-014-25a2025-09-04. Service bulletin. UNKNOWN OR OTHER. Some vehicles may exhibit sagging (1) at the front side of the rear sunshade(s) (2) or a difference in tension between the front and rear of the sunshade(s). When the rear sunshade is fully pulled up and then hooked up, the front hook's position may be lower, causing sagging on the front side of the rear sunshade.
SA-023-25a2025-08-05. Service bulletin. EXTERIOR LIGHTING; ENGINE; UNKNOWN OR OTHER. Some customers may complain about any of the following: 1. Infotainment Center Display does not provide the Authorization Code (OTP) during the MyMazda App Connected Vehicle enrollment. 2. Remote function(s) inoperative. Engine Start / Stop Door Lock / Unlock Lights ON / OFF Climate Control 3. MAZDA CONNECT connected vehicle reception strength icon shows "X" or " ".
SA-017-25b2025-08-05. Service bulletin. UNKNOWN OR OTHER. Mazda Connected Services - Frequently Asked Questions (FAQ)
09-029-252025-08-05. Service bulletin. EXTERIOR LIGHTING. Some customers may notice an abnormal noise (i.e. whine, groan, rattle or squeak) coming from the front combination lights when turning them on, or a few minutes after turning them off. The noise may be due to contamination by foreign matter during the manufacturing process and the fan motor bearing may become worn out during use. To eliminate this concern, the fan motor has been modified. NOTE: It is normal for some noise to occur within the first few seconds after starting the engine, when the front combination lights perform a self check (sweep).
02-002-252025-08-05. Service bulletin. SUSPENSION. Some vehicles may experience a knocking noise from the front suspension when driving on a rough road or traveling over bumps. This noise is caused by a gap between the front strut bump stopper and the mounting rubber that is pushed up when roads are bumpy. To eliminate this concern, the outer diameter of the bump stopper has been modified to prevent the knocking sound during driving on a rough road or traveling over bumps.
SA-032-252025-07-02. Service bulletin. UNKNOWN OR OTHER. Some customers may complain about a noisy HVAC blower motor or odor after a cabin air filter replacement. Foreign debris on the blower motor after servicing the cabin air filter may be the cause. During the removal of the cabin air filter, foreign debris (leaves, dust, dirt....ect.) may fall on the blower motor causing a fluttering type noise or odor.
SA-031-252025-07-02. Service bulletin. UNKNOWN OR OTHER. Some customers may report an odor or water in the HVAC system and upon inspection, the cabin air filter may be found to be wet.
SA-029-252025-07-02. Service bulletin. ELECTRICAL SYSTEM. This service information provides testing and charging procedures in order to promote proper battery maintenance, to deliver new vehicles with fully charged batteries, and to reduce unnecessary battery replacement cost. For new vehicles in stock at the dealer, inspect and maintain the batteries periodically according to the repair procedure.
SA-007-25a2025-07-02. Service bulletin. ELECTRICAL SYSTEM. The Mazda DCA-8000 is required for all warranty battery testing. If the Mazda DCA-8000 is not used, incorrect battery testing may result in unnecessary battery replacement. Use the following test procedures in this Service Bulletin to test Mazda vehicle batteries and to generate a Warranty Code. NOTE: A Warranty Code is required for warranty claim submission Battery Identification (Mazda batteries have 2 rating types) 1. JIS (Japanese Industrial Standard): JIS codes are six-digit alpha-numeric markings molded into the top of the battery to identify a battery by the capacity (amps), dimensions, and battery terminal type. Vehicles manufactured in Japan come from the factory with a JIS rated battery. NOTE: Replacement batteries may use a CCA rating. If so, use the CCA rating listed on the battery. 2. CCA (Cold Cranking Amps): CCA ratings are normally located on a sticker affixed to the top of the battery to indicate a battery’s Cold Cranking Amps. CCA rated batteries are supplied with domestically produced vehicles. NOTE: If an incorrect CCA rating is entered into the Mazda DCA-8000, it will result
SA-033-252025-07-01. Service bulletin. ENGINE. Some vehicles may experience a CHECK ENGINE light ON with DTC P0012, P0011, and possibly P0010. This may be caused by a malfunction in the intake EVVT motor that prevents it from accurately regulating the intake camshaft timing.
09-025-252025-07-01. Service bulletin. STRUCTURE:BODY; UNKNOWN OR OTHER. Some customers may complain that the rear outer handle is difficult to operate or that it gets stuck when released after being pulled once. This is caused when the rear outer handle and the rear handle bracket swell up from absorbing water and the space between them is reduced, resulting in friction and resistance when returning to the rest position after the handle has been pulled. To eliminate this concern, the rear outer handle and the rear outer handle bracket have been further modified to secure space between them even if the parts absorb water.
SA-024-252025-06-05. Service bulletin. UNKNOWN OR OTHER. Mazda Navigation Live Traffic information is available on the following 2 systems. SiriusXM® 3 Yr Traffic and Travel Link* Mazda Online Navigation* The table below provides Setting information for both systems. See APPLICABLE MODEL(S)/VINS above to determine how vehicles are equipped. NOTE: When selecting Navigation, data upload may take a few seconds. This is a normal function.
SA-023-252025-06-05. Service bulletin. UNKNOWN OR OTHER; ELECTRICAL SYSTEM; ENGINE; EXTERIOR LIGHTING. Some customers may complain about any of the following: 1. Infotainment Center Display does not provide the Authorization Code (OTP) during the MyMazda App Connected Vehicle enrollment. 2. Remote function(s) inoperative. Engine Start / Stop Door Lock / Unlock Lights ON / OFF Climate Control 3. MAZDA CONNECT connected vehicle reception strength icon shows "X" or " ".
SA-017-25a2025-06-05. Service bulletin. UNKNOWN OR OTHER. Frequently Asked Questions (FAQ) for Mazda Connected Services.
SA-012-25a2025-06-05. Service bulletin. UNKNOWN OR OTHER. Customers having MAZDA CONNECT concerns should have their vehicle repaired using the following repair procedure.
7325C Repair2025-06-05. Service campaign. ENGINE; ELECTRICAL SYSTEM. 7325C - EMISSION RECALL - 2024-2025 CX-90 AND 2025 CX-70 PHEV ONLY - HYBRID SYSTEM WARNING LIGHT MAY TURN ON. Mazda Motor Corporation has decided to conduct an Emission Recall on certain 2024-2025 CX-90 and 2025 CX-70 PHEV vehicles. Please see the description, model, year, and VIN range below for all vehicles in this campaign. There are 38,812 vehicles affected by this concern in the U.S. and U.S. Territories. Vehicles produced and sold by Mazda Canada Inc. are also included in this campaign and should be repaired if presented to your dealership following Mazda Warranty policy 3.30.STOP DELIVERY OF AFFECTED VEHICLES: MAZDA SALES AND SERVICE TEAMS - ACTION ITEM: There are approximately 5,197 vehicles in stock at U.S. Mazda dealers which must be repaired prior to delivery. All Mazda dealers must quarantine any affected new, used or CPO in-stock vehicles until the repair is completed. The affected dealer inventory list was provided to each District Service Manager with the notification of this dealer email. Once completed, the car can be delivered, and the Warranty claim can be submitted later without penalty since the car has been repaired. To All Mazda Dealers: Failure to properly perform any recall repair is a direct violation of Paragraph 14(F) of the Dealer Agreement and can cause one or more of the following: Mechanical breakdown or failure, crash or injury, Dealership penalties/fines by Mazda and CARB/EPA, increased liability risk for the dealership, Missed Recall penalties, loss of customer trust and a poor Customer Experience. Concern Outline: All vehicles can be repaired immediately upon receipt of this Mazda Dealer announcement by following the repair and warranty claiming procedures housed in Mazda Global Service Support (MGSS). On certain subject vehicles, during normal driving, a temporary decrease in insulation resistance may be detected, which could be mistakenly judged as an electric leakage, causing the hybrid system warning light to turn on and the leakage detection message to be displayed. The DTC P0AA6:00 may be stored in memory. In such a condition, once the vehicle power is switched off, it may become impossible to restart the vehicle due to fail-safe mode activation. Repair Outline: Reprogram the PCM with the Mazda Modular Diagnostic System (M-MDS), using Mazda Diagnostic and Repair Software (MDARS). The DTC code that may appear is P0AA6:00 - High voltage insulation malfunction: Decrease in vehicle insulation resistance. The software update will re-calibrate electrical leakage detection criteria and allow vehicle re-start. Legitimate electrical leakage faults can still be detected and store DTC P0AA6:00. If DTC P0AA6:00 - High voltage insulation malfunction: Decrease in vehicle insulation resistance is still present after repair of the 7325C Recall, please diagnose the issue using the Workshop Manual or search for a current Technical Service Bulletin.
SA-028-252025-06-05. Service bulletin. UNKNOWN OR OTHER. Some vehicles may have recall notifications remain on the center display even after a recall is performed. NOTE: When the warranty claim for the recall campaign is accepted at Mazda Japan, the recall notification will be automatically deleted via the Connected Service on the next day or later. This situation occurs if the Connected Service subscription has been cancelled while the recall notifications remain.
SA-027-252025-06-05. Service bulletin. EXTERIOR LIGHTING; LANE DEPARTURE: ASSIST; ELECTRICAL SYSTEM; ENGINE; LANE DEPARTURE: WARNING. The CX-70 and CX-90 have new and revised features that are different from previous models and may be difficult to understand. This Service Alert provides valuable information to support potential dealer and customer concerns.
SA-025-252025-06-05. Service bulletin. VISIBILITY/WIPER. Some vehicles may exhibit wiper blade contact with the A-pillar trim, with or without a chattering noise. This condition may be caused by worn or contaminated wiper blades. It can also be caused by bent wiper arms, or loose wiper arm retaining nuts due to improper handling. Improper handling occurs when pulling on or forcing the wiper arms. Technicians should be aware that while replacement of the wiper blade may resolve some cases, correction of bent components or repositioning of the wiper arms, particularly when the retaining nut is loose, requires additional steps to ensure proper alignment and function.
SA-022-252025-06-05. Service bulletin. POWER TRAIN. Due to a manufacturing change, the CX-70/CX-90 transmission has undergone a transmission part design change when replacing the transmission assembly. Old design originally required a coolant line running to the top of the bell housing, the new design has omitted the hole and need for the coolant line. The new/superseded design can be used in place of the old/original design, and the coolant hose with fitting is no longer needed.
09-023-252025-06-04. Service bulletin. STRUCTURE:BODY; ELECTRICAL SYSTEM. Some vehicles may exhibit that the power liftgate cannot be opened while stuck in an partially latched or fully opened/closed position, or it may reverse and open just before fully closing. with the following DTCs possibly stored in memory. B1451:02 BCM - Motor return switch circuit malfunction B1456:62 BCM - Latch condition malfunction U2646:16 BCM - Power liftgate (PLG) control module low power supply voltage input This may be caused by improper control software of the power liftgate control module. To eliminate this concern, the control software of the power liftgate control module has been modified. Customers having this concern should have their vehicle repaired using the following repair procedure.
09-022-252025-06-04. Service bulletin. SEATS. This may be caused by the door-side surface of the cushion trim being folded and compressed when exiting the vehicle and by the surface of the cushion bolster being rubbed and stretched when entering the vehicle. Repeated occurrences of these conditions may result in a crack forming in the surface of the seat cushion trim. To eliminate this concern, the material of the door-side surface of the front seat cushion trim has been modified to improve tear strength and scratch resistance. Customers having this concern should have their vehicle repaired using the following repair procedure.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.