Service bulletins for the 2025 Mazda CX-70
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
297 on file from NHTSA, as of 2026-10-19.
By type
By component
By trouble code
By topic
Only bulletins with component: Glass, wipers and mirrors are shown. Show all
| SA-025-25 | 2025-06-05. Service bulletin. VISIBILITY/WIPER. Some vehicles may exhibit wiper blade contact with the A-pillar trim, with or without a chattering noise. This condition may be caused by worn or contaminated wiper blades. It can also be caused by bent wiper arms, or loose wiper arm retaining nuts due to improper handling. Improper handling occurs when pulling on or forcing the wiper arms. Technicians should be aware that while replacement of the wiper blade may resolve some cases, correction of bent components or repositioning of the wiper arms, particularly when the retaining nut is loose, requires additional steps to ensure proper alignment and function. |
|---|---|
| SA-061-24a | 2024-10-04. Service bulletin. VISIBILITY/WIPER. Some customers may complain about a low washer fluid level warning message even though a visual inspection of the washer fluid tank looks like it still has a fair amount of fluid in it. With the CX-90 and CX-70 introduction of the front-engine and rear-wheel-drive layout, the washer tank shape was changed from a vertical to a horizontal type. This makes it look like there is still enough liquid left if viewed from the spout when the warning light comes on. |
The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.