Service bulletins for the 2019 Mazda CX-5
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
561 on file from NHTSA, as of 2026-10-19.
By type
By component
By trouble code
By topic
| SA-009-22 | 2022-03-04. Service bulletin. POWER TRAIN:DRIVELINE:DIFFERENTIAL UNIT; POWER TRAIN. The new AWD rear differential DOES NOT come with a breather cap on the rear of the differential, therefore a new one will need to be ordered and installed when replacing the differential. NOTE: The breather threads have a sealant and locking compound that prevents it from being reused. Refer to GEPC for the correct part number of the Differential Breather. The instructions on MGSS will be updated soon to include replacing the breather when replacing the differential with a new unit. |
|---|---|
| SA-008-22 | 2022-03-04. Service bulletin. STRUCTURE. Some vehicles may experience exterior trim heat damage when parked near a glass building or Low-E windows. This may be caused by the sun's reflection. |
| SA-006-22 | 2022-03-04. Service bulletin. SUSPENSION:FRONT:WHEEL BEARING; POWER TRAIN. There have been warranty claims submitted for growling or bearing whine noise in differentials, transfer units and transmissions where the source of the noise was a wheel bearing. This misdiagnosis can lead to multiple repair attempts, warranty debits, and additional inconvenience and/or cost to the customer. To reduce the chance of this occurring, please follow the steps outlined in the repair procedure. |
| SA-001-22 | 2022-03-04. Service bulletin. ELECTRICAL SYSTEM. Use the symptom troubleshooting tables below to diagnose MAZDA CONNECT concerns. |
| 00-001-22 | 2022-03-04. Service bulletin. POWER TRAIN; SERVICE BRAKES, HYDRAULIC; ENGINE AND ENGINE COOLING; STEERING. Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle-specific workshop manual or owner's manual. Services performed outside of Mazda's factory scheduled maintenance are not recommended. These services are unnecessary and create unneeded expenses for your customers. |
| MT-001-22 | 2022-03-04. Service bulletin. UNKNOWN OR OTHER; STRUCTURE. Some customers may report concerns with interior upholstery surface stains particularly on high contact areas (e.g.: steering wheel, door panels, shifter...etc.). This may be caused by skin oils or chemicals such as hand lotions. Use a clean towel damped in leather/vinyl cleaner or mild soap to clean the steering wheel. NOTE: Upholstery maintenance and care information can also be found in the Owner's Manual. |
| 15-002/22 | 2022-02-04. Service bulletin. ELECTRICAL SYSTEM:ADAS:PARKING ASSIST:SENSORS; ELECTRICAL SYSTEM; ELECTRICAL SYSTEM:ADAS:PARKING ASSIST:WARNING; FORWARD COLLISION AVOIDANCE: SENSING SYSTEM: CAMERA; EQUIPMENT; FORWARD COLLISION AVOIDANCE. Some vehicles may exhibit either or both of the following symptoms. 1. The SCBS warning light is illuminated with DTC U045A:68 [FORWARD SENSING CAMERA (FSC)]. U045A:68 Error signal received from parking assist unit 2. The parking sensor indicator is flashing with one or more of the following DTCs of PARKING ASSIST SYSTEM. B1B36:14 Front corner ultrasonic sensor (RH) circuit malfunction B1B36:2A Front corner ultrasonic sensor (RH) characteristic malfunction B1B38:14 Front ultrasonic sensor (RH) circuit malfunction B1B38:2A Front ultrasonic sensor (RH) characteristic malfunction B1B40:14 Front corner ultrasonic sensor (LH) circuit malfunction B1B40:2A Front corner ultrasonic sensor (LH) characteristic malfunction B1B42:14 Front ultrasonic sensor (LH) circuit malfunction B1B42:2A Front ultrasonic sensor (LH) characteristic malfunction Due to insufficient waterproof performance of the front harness short cords (1), water may enter in and accumulate in the C-11 (LH) or C-12 (RH) connectors (2) causing a short circuit between wires and an improper signal being sent from the parking (ultrasonic) sensor to the parking sensor unit. To eliminate this concern, the production process of the front harness short cord has been improved to increase waterproof performance. |
| 15-001/22 | 2022-02-04. Service bulletin. LANE DEPARTURE: BLIND SPOT DETECTION; LANE DEPARTURE; ELECTRICAL SYSTEM; EQUIPMENT. Some vehicles equipped with Blind Spot Monitoring (BSM) may experience a BSM indicator light on the outer door mirror, even if there is no vehicle in the alert (blind spot) area. NOTE: This concern occurs only after a cold start. As the BSM control module temperature rises, the BSM system returns to normal operation. Due to BSM control module production variances, a false detection may occur in some units when the BSM temperature in the control module has not yet reached normal operating temperature. To eliminate this concern, the control logic of the BSM control module has been modified. |
| 09-004/22 | 2022-02-04. Service bulletin. LATCHES/LOCKS/LINKAGES; ELECTRICAL SYSTEM. Some CX-5 and CX-30 customers may find that the liftgate does not close when pressing the power liftgate (PLG) rear switch (A) located on the interior liftgate trim. This may be caused by PLG switch corrosion. Water from a high pressure car washer and/or condensation may drip onto the switch connector and cause corrosion. To eliminate this concern, the PLG rear switch has been modified with a waterproof connector. Some Mazda3, CX-30 and MX-30 customers may complain that the vehicle door locking system does not work when the door lock switch on the liftgate interior trim is pressed. DTC B11C4:23 (BCM - liftgate lock switch circuit malfunction) may be stored. This may be caused during a high pressure car wash and/or condensation. Water may enter through the rear center brand emblem base component and drip onto the switch connector causing corrosion. The rusted connector may also cause a battery drain. To eliminate this concern, the rear center brand emblem base has been modified to prevent water entry (Mazda3) and the rear harness has been modified to prevent water infiltration (Mazda3, CX-30 and MX-30). |
| 09-003/22 | 2022-02-04. Service bulletin. EQUIPMENT; ELECTRICAL SYSTEM. Some vehicles may exhibit the following malfunctions: 1. The film on the center display is peeling off, as shown in the illustration below. This may be caused by cleaning the center display surface. Water and/or a cleaning solution may get into the scratches on the film and cause the film to start peeling. To eliminate this concern, the anti-reflective film has been modified to reduce scratches during cleaning. 2. The map on the center display may scroll by itself (without operating the map). The thermal expansion and contraction of the touch panel may cause a deformation. Loosening of the touch panel resulting in increased wire resistance may be causing the map malfunction. To eliminate this concern, a protection film has been added in the touch panel to prevent deformation. |
| SA-001/22 | 2022-02-04. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE; EQUIPMENT; ELECTRICAL SYSTEM; BACK OVER PREVENTION. Symptom troubleshooting tables to diagnose MAZDA CONNECT concerns. No. 1 Blank Screen No. 2. Rear View Camera is not displayed No. 3 Rebooting No. 4 Infotainment System Has No Sound No. 5 Commander Switch Does Not Work No. 6 Bluetooth device will not pair No. 7 Incorrect GPS position No. 8 Voice Recognition Does Not Work No. 9 Cannot Make a Hands-Free Call No. 10 Cannot Play Bluetooth Audio No. 11 Other Symptoms No. 12 How to update the Navigation SD Card Map No. 13 How to Check Navi SD Card VIN Lock |
| 09-028-21-3748a | 2022-01-06. Service bulletin. STRUCTURE. Whistling Noise From Front Door Window Glass or Windshield When Driving At Highway Speed: Some customers may complain about a whistling noise heard from the top of the A-pillar area and/or the top of windshield area when driving at highway speeds. When driving under the following conditions, a negative pressure is generated on the doors and the windshield pulling them outward and resulting in weatherstrip vibration. - The vehicle is exposed to a side wind while driving at highway speeds. - The vehicle is exposed to a strong side wind while driving at a speed slightly higher than highway speed. Customers having this concern should have their vehicle repaired using the following repair procedure. |
| 09-009-21-3759a | 2022-01-06. Service bulletin. STRUCTURE. Rusty Panel at Bottom (Inner Side) of Doors: Some customers may complain about rust at the bottom (inner side) of the doors where the seaming welt is located. It is caused by mud/sand adhering to the side sill, which scratches the paint surface when the door is opened/closed. The mud/sand is most likely brought in by the driver and/or passenger when stepping in and out of the vehicle. |
| 01-016-21-3853 | 2022-01-06. Service bulletin. ELECTRICAL SYSTEM; POWER TRAIN. Lack of Power When Accelerating in Cold Temperatures: Some customers may complain about lack of power when accelerating in cold temperatures (below 0 degrees F). To avoid slippage, engine power is restricted in cold temperatures, even when the road condition is not slippery. To eliminate this concern, the PCM and TCM control software has been modified to restrict engine power only when tire slippage is detected between the front and rear wheels in cold temperatures. Customers having this concern should have their vehicle repaired using the following repair procedure. |
| 01-013-21-3753a | 2022-01-06. Service bulletin. ENGINE AND ENGINE COOLING. Coolant Leaks At Cylinder Head: Some vehicles may have coolant leaks at the cylinder head around the exhaust manifold (as shown below). There may be cracks at the stud bolt hole (1) or at the outside of the exhaust manifold (2). |
| 01-006-21-3779b | 2022-01-06. Service bulletin. ELECTRICAL SYSTEM. Battery Maintenance: This service bulletin provides testing and charging procedures in order to promote proper battery maintenance, to deliver new vehicles with fully charged batteries, and to reduce unnecessary battery replacement cost. For new vehicles in stock at the dealer, inspect and maintain the battery periodically according to the repair procedure. |
| SA-031-21c | 2022-01-05. Service bulletin. ENGINE AND ENGINE COOLING; POWER TRAIN. New Cylinder Head Assembly Established: A new cylinder head assembly for service parts has been newly established for SKYACTIV-G 2.5 with cylinder deactivation when replacement is needed. Valves, valve springs, valve spring seats, and cotters (IN/EX) are included in the new assembly. |
| SA-019-21e | 2021-12-02. Service bulletin. EQUIPMENT; EQUIPMENT ADAPTIVE/MOBILITY. MAZDA CONNECT SYMPTOM TROUBLESHOOTING [6TH GENERATION VEHICLES]. Use the symptom troubleshooting tables below to diagnose MAZDA CONNECT concerns |
| SA-052-21 | 2021-12-02. Service bulletin. EQUIPMENT; ELECTRICAL SYSTEM. For improvement of electrical diagnosis, the SKYACTIV® Wiring Terminal Test Kits has been delivered all the dealers. The terminal test kit enables you: To check pin fit drag of all PCM terminals used in SKYACTIV® vehicles and compare suspect terminal drag with a good know terminal.To measure the voltage/resistance avoiding any terminal damage. |
| 15-004-21-3835 | 2021-12-02. Service bulletin. FORWARD COLLISION AVOIDANCE; EQUIPMENT ADAPTIVE/MOBILITY. NOTE: This Service Information is only applicable for vehicles equipped with a Forward Sensing Camera (FSC), KDD1-67-XCX and GSH7-67-XCX*. If B61L-67-XCX* appears in the GEPC search, the VIN is applicable for this repair only if the part has been previously replaced with KDD1-67-XCX. Some vehicles may exhibit the master warning light (and other warning lights) illuminated while driving, with DTC B115E:76 stored in memory. |
| 09-033-21-3847 | 2021-12-02. Service bulletin. STRUCTURE. Some customers may complain that the rear door seaming welt (1) comes off when stepping in and/or out of the vehicle. This is caused by the gripping force of the seaming welt being insufficient for frequent usage of the rear seat (vehicle used for ride sharing). No mass production change is planned. |
| 09-016-21-3797c | 2021-12-02. Service bulletin. EQUIPMENT; STRUCTURE. Some vehicles may exhibit rust or paint peeling at the inside edge of the front door(s). This may be caused by dust adhering between the front door edge and the rear door weatherstrip, which rubs/damages the paint during vehicle operation (door opening/closing and vibration while driving). NOTE: If the rust/paint peeling is seen on the outer side of the door, this service bulletin does not apply. |
| 08-003-21-3837 | 2021-12-02. Service bulletin. EQUIPMENT; SEAT BELTS:FRONT:WARNING LIGHT/DEVICES; SEATS. Some vehicles equipped with a seat ventilation system may have the passenger seat belt warning light on, even though there is no passenger in the seat. This concern may be caused by an overly sensitive detection of the occupancy sensor. The weight of the seat ventilation unit may be captured by the occupancy sensor, resulting in a false detection. |
| SA-012-21g | 2021-11-01. Service bulletin. EQUIPMENT; ELECTRICAL SYSTEM. MAZDA CONNECTED SERVICES - FREQUENTLY ASKED QUESTIONS (FAQ): Index: General Questions, Setup and Getting Started, Registration / Enrollment, WI-FI General Information, WI-FI How-To, WI-FI Trial Period, Interacting With The App, Service Issues, Troubleshooting, Reception Level Inspection, Dealer Processes, Conditions for Remote Engine Start Will Not Function, Conditions for Remote Engine Start Function Will turn engine OFF, Educational Videos, Resources |
| SA-031-21c | 2021-11-01. Service bulletin. ENGINE AND ENGINE COOLING; EQUIPMENT; EQUIPMENT ADAPTIVE/MOBILITY. A new cylinder head assembly for service parts has been newly established for SKYACTIV-G 2.5 with cylinder deactivation when replacement is needed. Valves, valve springs, valve spring seats, and cotters (IN/EX) are included in the new assembly. Dealers can now utilize the Limited Parts Ordering (LPO) page on eMDCS to order the repair parts for 2.5L (with cylinder deactivation) and 2.5L turbo cylinder head repairs. There is no longer a need to contact hotline for part ordering. If there are any questions on part ordering or part status, contact the DAG group for assistance. |
The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.