WenmarOpen by Wenmar Pro

Service bulletins for the 2022 Mazda CX-30

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

419 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Bulletins, newest first
SA-021-23a2023-09-05. Service bulletin. ELECTRICAL SYSTEM. Qi Wireless Charger Symptom Troubleshooting
SA-009-23h2023-09-05. Service bulletin. EXTERIOR LIGHTING; ENGINE AND ENGINE COOLING; EQUIPMENT:ELECTRICAL:INFOTAINMENT. Some customers may complain about any of the following: 1. Infotainment Center Display does not provide the Authorization Code (OTP) during the MyMazda App Connected Vehicle enrollment. 2. Remote function(s) inoperative. Engine Start / Stop, Door Lock / Unlock, Lights ON / OFF
SA-009-23g2023-09-05. Service bulletin. EXTERIOR LIGHTING; EQUIPMENT:ELECTRICAL:INFOTAINMENT; ENGINE AND ENGINE COOLING. Some customers may complain about any of the following: 1. Infotainment Center Display does not provide the Authorization Code (OTP) during the MyMazda App Connected Vehicle enrollment. 2. Remote function(s) inoperative. Engine Start / Stop, Door Lock / Unlock, Lights ON / OFF
SA-037-23a2023-09-03. Service bulletin. ENGINE AND ENGINE COOLING. A new cylinder head assembly for service parts has been newly established for SKYACTIV-G 2.5 with cylinder deactivation when replacement is needed. Valves, valve springs, valve spring seats, and cotters (IN/EX) are included in the new assembly. Dealers can now utilize the Limited Parts Ordering (LPO) page on eMDCS to order the repair parts for 2.5L (with cylinder deactivation) and 2.5L turbo cylinder head repairs. Hotline and MASH authorization is not required to order parts for performing this repair. If there are any questions on part ordering or part status, contact the DAG group for assistance.
09-015-23b2023-09-03. Service bulletin. EXTERIOR LIGHTING. Some customers may notice an abnormal noise (i.e. whine, groan, rattle or squeak) coming from the front combination lights when turning them on, or a few minutes after turning them off. The noise may be due to contamination by foreign matter during the manufacturing process. The fan motor bearing may become worn out during use. To eliminate the noise, the production process at the supplier and the material has been modified. NOTE: It is normal for some noise to occur within the first few seconds after starting the engine, when the front combination lights perform a self check (sweep).
01-010-232023-09-03. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM); ENGINE AND ENGINE COOLING. Some customers may complain about engine surging 100-200 rpm when accelerating up a hill at altitudes around 6,700 feet or higher. This concern may be caused by improper PCM control software in particular situations.
SA-039-232023-08-05. Service bulletin. STRUCTURE. Some vehicles may experience exterior trim heat damage when parked near a glass building or Low-E windows. This may be caused by the sun's reflection.
SA-027-23b2023-08-05. Service bulletin. ELECTRICAL SYSTEM. Some customers may experience the following: In-Vehicle Network Malfunction error message, Master Warning light ON, Connected Vehicle Reception Icon shows "X".
SA-042-232023-08-05. Service bulletin. EQUIPMENT:ELECTRICAL:NAVIGATIONAL SYSTEM(GLOBAL POSITIONING SYSTEM). Some customers may complain about the Active Driving Display not displaying turn by turn (TBT) travel direction or navigation information.
SA-009-23F2023-08-05. Service bulletin. LATCHES/LOCKS/LINKAGES; EXTERIOR LIGHTING; EQUIPMENT:ELECTRICAL:INFOTAINMENT; ENGINE AND ENGINE COOLING. Some customers may complain about any of the following: 1. Infotainment Center Display does not provide the Authorization Code (OTP) during the MyMazda App Connected Vehicle enrollment. 2. Remote function(s) inoperative. Engine Start / Stop Door Lock / Unlock Lights ON / OFF 3. MAZDA CONNECT connected vehicle reception strength icon shows "X" or " ".
16-008-232023-08-04. Service bulletin. EQUIPMENT:ELECTRICAL:INFOTAINMENT; EQUIPMENT:ELECTRICAL:INFOTAINMENT:SOFTWARE; ELECTRICAL SYSTEM. Updated software release for concerns with MAZDA CONNECT infotainment system. Some vehicles may experience the symptoms mentioned below, which can be fixed with the latest software update (Ver. 7000C0A-NA01_12006 or later).
16-006-232023-08-03. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY; ELECTRICAL SYSTEM. Updated software release for concerns with MAZDA CONNECT infotainment system. Some vehicles may experience the symptoms mentioned below, which can be fixed with the latest software update (Ver. 7000C0A-NA06_12018 or later).
09-029-232023-08-03. Service bulletin. ELECTRICAL SYSTEM; LATCHES/LOCKS/LINKAGES:DOORS:LOCK. Some customers may experience one or both of the following symptoms while locking and unlocking the doors works fine using the remote transmitter. Symptom 1: The touch sensor of the front door outer handle does not lock the doors after rain and/or car washing, even though unlocking is possible. Symptom 2: The touch sensor of the front door outer handle does not unlock the doors.
09-015-23a2023-08-03. Service bulletin. EXTERIOR LIGHTING. Some customers may notice an abnormal noise (i.e. whine, groan, rattle or squeak) coming from the front combination lights when turning them on, or a few minutes after turning them off. The noise may be due to contamination by foreign matter during the manufacturing process. The fan motor bearing may become worn out during use. To eliminate the noise, the production process at the supplier and the material has been modified. NOTE: It is normal for some noise to occur within the first few seconds after starting the engine, when the front combination lights perform a self check (sweep).
09-014-23a2023-08-03. Service bulletin. STRUCTURE; VISIBILITY:REARVIEW MIRRORS/DEVICES. Some vehicles may experience white-streak stains appearing on the front door that look like they seeped out from under the outer mirror base. This is caused by water intruding from gaps of the outer mirror body and/or the hinge of the outer mirror, and corrosion occurring on the aluminum die-cast inner base in the outer mirror. Water, including white-salty corrosion, may drip out from gaps under the outer mirror base resulting in white stains on the front door. To eliminate this concern, the front outer mirror inner base has been modified.
09-012-23b2023-08-03. Service bulletin. SEATS; ELECTRICAL SYSTEM. Some customers may complain that the seat warmer does not operate when turning the ignition on while the seat is warm but when turning the ignition off then on again, the seat warmer begins to operate appropriately. DTCs B1030:13 and/or B1032:13 are stored. This is caused by the seat warmers fail-safe mode which prevents it from working during the initial drive cycle. To correct this issue, the seat warmer has been modified to optimize the temperature control. B1030:13 Seat warmer unit (LH) circuit malfunction (Heater side) B1032:13 Seat warmer unit (RH) circuit malfunction (Heater side)
SA-037-232023-07-05. Service bulletin. ENGINE AND ENGINE COOLING. A new cylinder head assembly for service parts has been newly established for SKYACTIV-G 2.5 with cylinder deactivation when replacement is needed. Valves, valve springs, valve spring seats, and cotters (IN/EX) are included in the new assembly. Dealers can now utilize the Limited Parts Ordering (LPO) page on eMDCS to order the repair parts for 2.5L (with cylinder deactivation) and 2.5L turbo cylinder head repairs. Hotline and MASH authorization is not required to order parts for performing this repair. If there are any questions on part ordering or part status, contact the DAG group for assistance.
SA-036-232023-07-05. Service bulletin. STRUCTURE; EQUIPMENT. Interior parts made of resin have antistatic coating to prevent dust from sticking on the surfaces, and depending on the conditions of use, the antistatic components may crystallize slightly, giving an appearance of white stains on the surface. To remove the stains, wipe the stained surface with a towel soaked with water mixed with a small portion of a neutral detergent. If the white stains reappear again, simply wipe them again in the same way. NOTE: The antistatic effect does not deteriorate with this procedure.
SA-027-23a2023-07-05. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY; ELECTRICAL SYSTEM. IN-VEHICLE NETWORK MALFUNCTION AND MASTER WARNING LIGHT ON. DTC U3000:04 STORED (DOES NOT APPLY TO 09-001/23)
SA-015-23d2023-07-05. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY; ENGINE AND ENGINE COOLING. Connected Services, Frequently Asked Questions (FAQ)
SA-009-23e2023-07-05. Service bulletin. ENGINE AND ENGINE COOLING; EXTERIOR LIGHTING; LATCHES/LOCKS/LINKAGES; STRUCTURE. Some customers may complain about any of the following: 1. Infotainment Center Display does not provide the Authorization Code (OTP) during the MyMazda App Connected Vehicle enrollment. 2. Remote function(s) inoperative. Engine Start / Stop Door Lock / Unlock Lights ON / OFF 3. MAZDA CONNECT connected vehicle reception strength icon shows "X" or " ".
SA-008-23a2023-07-05. Service bulletin. TIRES; WHEELS. Some vehicles may exhibit a steering shimmy or body vibration during the PDI test drive or during the first few miles of driving after the vehicle has been delivered to the customer due to flat spots on the tires. Flat spots on tires may be caused by improper maintenance during dealer storage (e.g.: Vehicle was left stationary for a prolonged period of time in high ambient temperatures).
09-027-232023-07-05. Service bulletin. STRUCTURE. On some vehicles, the front door glass run channel may interfere with the rear door garnish. Since the front door glass run channel is not fixed strongly enough to the door, repetition of door operation may result in interference and damage to the rear door rubber seal.
09-024-232023-07-05. Service bulletin. ELECTRICAL SYSTEM; LATCHES/LOCKS/LINKAGES. Some customers may experience that the out-of-area (reception area) type auto lock function sometimes fails. When the front door is being closed with a hand touching one or both of the touch sensors on the front outer handle, the out-of-area (reception area) type auto lock function may fail. Control software of the LF control unit (LFU) has been modified.
09-007-23b2023-07-05. Service bulletin. SEATS. At PDI or when new vehicle is delivered, some customers may complain about wrinkles on the leather seat cushion and/or seat back surface.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.