WenmarOpen by Wenmar Pro

Service bulletins for the 2021 Mazda CX-30

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

616 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Only bulletins with component: Equipment and accessories are shown. Show all

Bulletins, newest first
SA-028-222022-06-04. Service bulletin. EQUIPMENT:ELECTRICAL:WIRELESS CHARGER/CRADLE; ELECTRICAL SYSTEM. Qi Wireless Charger Symptom Troubleshooting
SA-017-22a2022-06-04. Service bulletin. EQUIPMENT:ELECTRICAL:INFOTAINMENT; EXTERIOR LIGHTING:HEADLIGHTS; LATCHES/LOCKS/LINKAGES:DOORS:LOCK; ELECTRICAL SYSTEM. Some customers may complain about any of the following: *Infotainment Center Display does not provide the Authorization Code during the MyMazda App Connected Vehicle enrollment. **Remote function(s) inoperative. **Engine Start / Stop **Door Lock / Unlock **Lights ON / OFF *MAZDA CONNECT connected vehicle reception strength icon shows "X" or " ". Confirm the customer's phone and vehicle have good to strong reception during the concern as shown in the table below. **If the reception is weak, move the vehicle to a location where the reception is good to strong as shown in the table, then try to get the Authorization Code and/or operate the remote functions before proceeding to the Repair Procedure if there is still an issue. **If the reception is good to strong, proceed to the Repair Procedure.
SA-001-22c2022-06-04. Service bulletin. COMMUNICATION:MANUFACTURER TELEMATICS; ELECTRICAL SYSTEM; EQUIPMENT:ELECTRICAL:INFOTAINMENT; UNKNOWN OR OTHER. Use the symptom troubleshooting tables to diagnose MAZDA CONNECT concerns.
09-012-222022-05-05. Service bulletin. EQUIPMENT; SEATS. At PDI or when new vehicle is delivered, some customers may complain about wrinkles on the leather seat cushion and/or seat back surface. Customers having this concern should have their vehicle repaired by a qualified upholstery repair specialist using the following repair procedure.
SA-026-222022-05-05. Service bulletin. EQUIPMENT; ELECTRICAL SYSTEM. Apple CarPlay / Android Auto Frequently Asked Questions (FAQs)
SA-020-222022-05-05. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY; ELECTRICAL SYSTEM. Some customers may complain about the following symptoms occurring when driving without anything ahead (no metallic object reflects the radar wave such as a vehicle ahead, an oncoming vehicle, a road sign or a guard rail). *While using Mazda Radar Cruise Control (MRCC), the MRCC cancels by itself. NOTE: The customer may misinterpret MRCC cancellation as unintended braking. MRCC cancellation feels the same as the steering wheel cancel button being pressed or the brake pedal being tapped. *When MRCC is not in use, "Safety and Driver Support Systems Temporarily Disabled. Front Radar Obscured." message appears in the instrument cluster / "Remove dirt on the front radar sensor" message appears in the center display and related i-ACTIVSENSE functions stop working. This is caused by the front radar (under specific road conditions) detecting a false error as if the radar sensor is dirty, resulting in cancellation of the MRCC. (no metallic object reflects the radar wave such as a vehicle ahead, an oncoming vehicle, a road sign or a guard rail).
SA-016-222022-05-05. Service bulletin. EQUIPMENT. There are currently 2 methods for cutting a new auxiliary key blank. A. Auxiliary Key Trace Cut Method B. Auxiliary Key Code Cut Method
SA-014-222022-04-06. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. Accessory instructions can be found on OneMazda under Dealer Resources - Parts & Accessories.
SA-012-222022-04-06. Service bulletin. ELECTRICAL SYSTEM; EQUIPMENT; TIRES; EQUIPMENT ADAPTIVE/MOBILITY. Some customers may complain about the infotainment system and/or the MyMazda App showing incorrect tire pressures and/or tire pressure missing. This may be caused by: Incorrect calendar entry (month/day/year) after a battery disconnect *Infotainment system software update. *BCM TPMS unlearn during vehicle storage or transport. *Wheel/Tire change
SA-006-22a2022-04-06. Service bulletin. EQUIPMENT:MECHANICAL; POWER TRAIN; WHEELS. There have been warranty claims submitted for growling or bearing whine noise in differentials, transfer units and transmissions where the source of the noise was a wheel bearing. This misdiagnosis can lead to multiple repair attempts, warranty debits, and additional inconvenience and/or cost to the customer. To reduce the chance of this occurring, please follow the steps outlined in the repair procedure.
09-008/222022-04-05. Service bulletin. EQUIPMENT; STRUCTURE. Some vehicles may exhibit water leaking into the passenger compartment from the rear door through the bottom of the service hole behind the rear door trim during rain or when washing the vehicle. This is caused by one of the following: *Since the material of the seal rubber is not resistant to surfactants, the rubber deteriorates when the vehicle is washed and allows water to penetrate into the seal rubber of the service hole cover. *The lower tabs of the service hole cover may not have been completely engaged at the factory. To eliminate this concern, the seal material of the service-hole cover has been changed (Japan built Mazda3) and a mass production change will be implemented in the future (Mexico built Mazda3 and CX-30).
09-006/222022-04-05. Service bulletin. LATCHES/LOCKS/LINKAGES; EQUIPMENT; FUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY:FILLER PIPE AND CAP. Some customers may experience that after the doors are locked and the Fuel Door Lock Delay with MAZDA CONNECT has passed (default setting is 90 seconds), the fuel-filler lid does not lock and can be opened when pressing it. NOTE: *The fuel-filler lid does not lock immediately after the doors are locked, but after the time set in the Fuel Door Lock Delay (0, 30, 60, 90, and 120 seconds). *Although the root cause has not been identified, the vehicle should be repaired by adjusting the fuel-filler lid opener cable position when there is a customer complaint.
01-003/222022-04-05. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL; ELECTRICAL SYSTEM. The Mazda DCA-8000 is required for all warranty battery testing. If the Mazda DCA-8000 is not used, incorrect battery testing may result in unnecessary battery replacement. Use the following test procedures in this Service Bulletin to test Mazda vehicle batteries and to generate a Warranty Code.
01-001/22a2022-04-05. Service bulletin. EQUIPMENT; ENGINE AND ENGINE COOLING. Some vehicles may exhibit an excessive body vibration when idling or driving after being left in extremely cold weather (-20°C/-4°F or below) for a long time. This is caused by the No.1, No. 3 and No. 4 rubber hardening due to material characteristics. NOTE: This concern only happens in extremely cold weather, therefore this TSB is only applicable for extremely cold regions. To eliminate this concern, the cold environment performance of the engine mount rubber has been increased by changing the rubber material.
SA-007-22a2022-03-04. Service bulletin. ELECTRICAL SYSTEM; EQUIPMENT:ELECTRICAL:INFOTAINMENT. Some vehicles equipped with SiriusXM Travel Link and a Navigation SD Card added by dealer/customer may experience a SiriusXM Travel Link error when selecting Parking Information.
SA-007-222022-03-04. Service bulletin. EQUIPMENT:ELECTRICAL:INFOTAINMENT; ELECTRICAL SYSTEM. Some customers may experience a SiriusXM Travel Link error when selecting Parking Information.
SA-004-222022-03-04. Service bulletin. EQUIPMENT:ELECTRICAL:INFOTAINMENT:SOFTWARE; ELECTRICAL SYSTEM. Customers having MAZDA CONNECT concerns should have their vehicle repaired using the following repair procedure.
15-003/222022-02-04. Service bulletin. FORWARD COLLISION AVOIDANCE: SENSING SYSTEM: CAMERA; EQUIPMENT; ELECTRICAL SYSTEM; FORWARD COLLISION AVOIDANCE. Some vehicle may experience the i-ACTIVSENSE/ALH warning lights on and a system error messages may be found in the center display as well. DTC U3000:04 (FSC) is stored in memory DTC U3000:04 (FSC) - Forward sensing camera (FSC) internal malfunction This may be caused by a hardware failure in an internal device of the FSC that results in the malfunction detection. To eliminate this concern, the production process of the FSC has been modified.
SA-002/222022-02-04. Service bulletin. ELECTRICAL SYSTEM; EQUIPMENT. Some vehicles may have a "Low Battery Risk. Start Vehicle to Charge 12V Battery" warning message in the instrument cluster and a 30 second alarm sound. This is caused by the vehicle's electrical control area network (CAN) entering "Sleep Mode" when the network awake time reaches 30 cumulative minutes without the engine running. The vehicle network starts to wake-up at the moment any side door is opened in order to increase the start-up speed of electrical components and the network awake cumulative time count begins by the customer doing any one of the following wake-up triggers: Open any door(s), Unlock doors, Open liftgate, Depress brake pedal, Push start/stop button, Other operations that wake-up the network. No dealer visit is required. The warning message can be cleared by starting the engine and idling or driving for 5 minutes or longer.
SA-027-21c2022-01-06. Service bulletin. ELECTRICAL SYSTEM; EQUIPMENT. Mazda Connect Symptom Troubleshooting (7th Generation Vehicles): Customers having MAZDA CONNECT concerns should have their vehicle repaired using the following repair procedure. No. 1 Blank Screen No. 2. Rear View Camera is not displayed No. 3 Rebooting No. 4 Infotainment System Has No Sound No. 5 Commander Switch Does Not Work No. 6 Bluetooth device will not pair No. 7 Incorrect GPS position No. 8 Voice Recognition Does Not Work No. 9 Cannot Make a Hands-Free Call No. 10 Cannot Play Bluetooth Audio No. 11 How to update the Navigation SD Card Map No. 12 How to Check Navi SD Card VIN Lock
SA-013-21h2022-01-06. Service bulletin. ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL; EQUIPMENT; ELECTRICAL SYSTEM. Connected Vehicle Symptom Troubleshooting: Some customers may complain about any of the following: - Infotainment Center Display does not provide the Authorization Code during the MyMazda App Connected Vehicle enrollment. - Remote function(s) inoperative. o Engine Start / Stop o Door Lock / Unlock o Lights ON / OFF MAZDA CONNECT connected vehicle reception strength icon shows "X" or " ". Confirm the customer's phone and vehicle have good to strong reception during the concern as shown in the table below. - If the reception is weak, move the vehicle to a location where the reception is good to strong as shown in the table, then try to get the Authorization Code and/or operate the remote functions before proceeding to the Repair Procedure if there is still an issue. - If the reception is good to strong, proceed to the Repair Procedure.
16-002-21-38582022-01-06. Service bulletin. ELECTRICAL SYSTEM; EQUIPMENT. Audio, Navigation, And Phone Concerns With Mazda Connect Infotainment System (7th Generation Models): Some vehicles may experience the symptoms mentioned below, which can be fixed with the latest software update (Version 7000C0A-NA01_11012 or later). --> See document for full list. Customers having this concern(s) should have their vehicle repaired using the following repair procedure.
09-039-21-38072022-01-06. Service bulletin. STRUCTURE; EQUIPMENT; ELECTRICAL SYSTEM. Door Outer Handle Touch Sensor Does Not Lock And/Or Unlock: Some customers may experience one or both of the following symptoms while locking and unlocking the doors works fine using the remote transmitter. Symptom 1: The touch sensor of the front door outer handle does not lock the doors after rain and/or car washing, even though unlocking is possible. Symptom 2: The touch sensor of the front door outer handle does not unlock the doors. Cause 1 (for Symptom 1): Water may accumulate around the touch sensor in the outer handle, resulting in temporary lower sensitivity of the capacitive sensor. Also, if car wash foam gets inside the outer handle while washing the vehicle, the foam may disturb the touch sensor detection. Mazda is still working on a mass production change for this concern. Cause 2 (for Symptom 2): Improper soldering in the production process may disturb the touch sensor detection. To eliminate this concern, the production process has been modified. Customers having this concern should have their vehicle repaired using the following repair procedure.
09-019-21-3813a2022-01-06. Service bulletin. FUEL/PROPULSION SYSTEM; STRUCTURE; EQUIPMENT. Fuel Filler Lid Panel Is Deformed: Some vehicles may exhibit a deformed fuel-filler lid panel (1) attached to the fuel-filler lid box, resulting in a poor appearance. This concern is caused by the lid box not having enough water drainage capability which leads to the accumulation of water inside it. The water then freezes in cold weather and expands or the inner side of the lid panel absorbs the water and swells from long exposure, deforming the lid panel. To eliminate this concern, the shape of the fuel-filler lid box has been modified to have better drainage capability and a modified fuel-filler lid panel service part has been established for less water absorbance. Customers having this concern should have their vehicle repaired using the following repair procedure.
09-012-21-3801b2022-01-06. Service bulletin. ELECTRICAL SYSTEM; EQUIPMENT. Door Lock Will Not Work Using Remote Transmitter and Engine Will Not Start: Some customers may experience all of following symptoms: 1. The door lock/unlock operation will not work using the remote transmitter button. 2. The door lock/unlock operation will not work using the door lock/release touch sensor. 3. The engine will not start using the ignition switch. 4. The transmitter operates by itself. 5. The key battery drains faster than usual. Symptoms 1-3: This may be caused when excess load is applied to the remote transmitter, deforming the electrical terminals and creating poor contact with the battery. To eliminate this concern, the structure in the remote transmitter has been modified to reduce the deformation of the electrical terminals. Symptom 4-5: This may be caused when excessive load is applied to the remote transmitter, creating a gap around the gasket where moisture enters and corrodes the circuit board which in turn drains the key battery faster than usual. To eliminate this concern, the thickness of the case wall on the gasket mounting surface has been increased and the bonding strength of the components has been improved to prevent deformation. Customers having this concern should have their vehicle repaired using the following repair procedure.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.