WenmarOpen by Wenmar Pro

Service bulletins for the 2020 Mazda CX-30

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

687 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Bulletins, newest first
SA-034-222022-06-04. Service bulletin. ELECTRICAL SYSTEM. When the Telematics Control Unit (TCU) replacement is necessary due to a failure, use MDARS to activate the new TCU after replacement. Use the information in this service alert to initialize the new TCU until the procedure on MGSS is updated.
SA-028-222022-06-04. Service bulletin. EQUIPMENT:ELECTRICAL:WIRELESS CHARGER/CRADLE; ELECTRICAL SYSTEM. Qi Wireless Charger Symptom Troubleshooting
SA-019-22a2022-06-04. Service bulletin. UNKNOWN OR OTHER. Mazda Connected Services Frequently Asked Questions (FAQs)
SA-017-22a2022-06-04. Service bulletin. EQUIPMENT:ELECTRICAL:INFOTAINMENT; EXTERIOR LIGHTING:HEADLIGHTS; LATCHES/LOCKS/LINKAGES:DOORS:LOCK; ELECTRICAL SYSTEM. Some customers may complain about any of the following: *Infotainment Center Display does not provide the Authorization Code during the MyMazda App Connected Vehicle enrollment. **Remote function(s) inoperative. **Engine Start / Stop **Door Lock / Unlock **Lights ON / OFF *MAZDA CONNECT connected vehicle reception strength icon shows "X" or " ". Confirm the customer's phone and vehicle have good to strong reception during the concern as shown in the table below. **If the reception is weak, move the vehicle to a location where the reception is good to strong as shown in the table, then try to get the Authorization Code and/or operate the remote functions before proceeding to the Repair Procedure if there is still an issue. **If the reception is good to strong, proceed to the Repair Procedure.
SA-004-22b2022-06-04. Service bulletin. UNKNOWN OR OTHER; ELECTRICAL SYSTEM:SOFTWARE; ELECTRICAL SYSTEM. Customers having MAZDA CONNECT concerns should have their vehicle repaired using the following repair procedure.
SA-001-22c2022-06-04. Service bulletin. COMMUNICATION:MANUFACTURER TELEMATICS; ELECTRICAL SYSTEM; EQUIPMENT:ELECTRICAL:INFOTAINMENT; UNKNOWN OR OTHER. Use the symptom troubleshooting tables to diagnose MAZDA CONNECT concerns.
09-016-222022-05-05. Service bulletin. STRUCTURE:FRAME AND MEMBERS; EQUIPMENT. Some customers may complain that the rear console lid does not slide smoothly. This may be caused by improperly positioned felt pads attached to the rear console lid lock, which may have moved out of position after repetitive use. The exposed adhesive residue may stick to the rail and disrupt smooth sliding operation. To eliminate this concern, the felt pad positions have been changed.
09-015-222022-05-05. Service bulletin. STRUCTURE:BODY:HATCHBACK/LIFTGATE; LATCHES/LOCKS/LINKAGES. Some vehicles may exhibit corrosion on the liftgate lock striker. This may be caused by water penetrating from micro cracks existing on the lock striker's coating surface that reacts with zinc contained in the undercoating and produces the corrosion. To eliminate this concern, a modified undercoating has been established for the liftgate lock striker.
09-012-222022-05-05. Service bulletin. EQUIPMENT; SEATS. At PDI or when new vehicle is delivered, some customers may complain about wrinkles on the leather seat cushion and/or seat back surface. Customers having this concern should have their vehicle repaired by a qualified upholstery repair specialist using the following repair procedure.
08-002-222022-05-05. Service bulletin. AIR BAGS. Some vehicles may exhibit that the air bag warning light turns on or repeats cycles of turning on and off with DTC B1126:13 and/or B1127:13 stored in memory. *B1126:13 - Driver-side side air bag module circuit open circuit or resistance high *B1127:13 - Passenger-side side air bag module circuit open circuit or resistance high This issue is caused by one or both of the following: *When the driver or passenger moves, a load is applied to the seat back and the load may cause displacement of the mating terminals in the side air bag module connector, resulting in insufficient contact and higher resistance. *The DTC detection level is too sensitive. To eliminate these concerns: *The design of the connector terminals in the side air bag module has been modified for firmer contact. *The DTC detection level of the SAS control module has been optimized.
06-001-222022-05-05. Service bulletin. STEERING. Some vehicles may exhibit a knocking noise from the steering column while driving. This may be caused by an improper manufacturing process where the worm wheel gear is not at a proper distance.
02-003-222022-05-05. Service bulletin. STEERING. Some customers may complain that the steering wheel is off center more than 3° even when driving straight on a flat road.
SA-026-222022-05-05. Service bulletin. EQUIPMENT; ELECTRICAL SYSTEM. Apple CarPlay / Android Auto Frequently Asked Questions (FAQs)
SA-020-222022-05-05. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY; ELECTRICAL SYSTEM. Some customers may complain about the following symptoms occurring when driving without anything ahead (no metallic object reflects the radar wave such as a vehicle ahead, an oncoming vehicle, a road sign or a guard rail). *While using Mazda Radar Cruise Control (MRCC), the MRCC cancels by itself. NOTE: The customer may misinterpret MRCC cancellation as unintended braking. MRCC cancellation feels the same as the steering wheel cancel button being pressed or the brake pedal being tapped. *When MRCC is not in use, "Safety and Driver Support Systems Temporarily Disabled. Front Radar Obscured." message appears in the instrument cluster / "Remove dirt on the front radar sensor" message appears in the center display and related i-ACTIVSENSE functions stop working. This is caused by the front radar (under specific road conditions) detecting a false error as if the radar sensor is dirty, resulting in cancellation of the MRCC. (no metallic object reflects the radar wave such as a vehicle ahead, an oncoming vehicle, a road sign or a guard rail).
SA-019-222022-05-05. Service bulletin. ELECTRICAL SYSTEM. Mazda Connected Services Frequently Asked Questions (FAQ).
SA-018-222022-05-05. Service bulletin. ENGINE AND ENGINE COOLING. The WSM shows 3 possible crankshaft sprocket and timing chain combinations (Type A, B and C), but some vehicles have been produced with a combination of Type A timing chain with 2 yellow-colored links with a Type B crankshaft sprocket.
SA-017-222022-05-05. Service bulletin. ELECTRICAL SYSTEM. Some customers may complain about any of the following: Infotainment Center Display does not provide the Authorization Code during the MyMazda App Connected Vehicle enrollment. *Remote function(s) inoperative. *Engine Start / Stop **Door Lock / Unlock **Lights ON / OFF *MAZDA CONNECT connected vehicle reception strength icon shows "X" or " ". Confirm the customer's phone and vehicle have good to strong reception during the concern as shown in the table below. *If the reception is weak, move the vehicle to a location where the reception is good to strong as shown in the table, then try to get the Authorization Code and/or operate the remote functions before proceeding to the Repair Procedure if there is still an issue. *If the reception is good to strong, proceed to the Repair Procedure.
SA-016-222022-05-05. Service bulletin. EQUIPMENT. There are currently 2 methods for cutting a new auxiliary key blank. A. Auxiliary Key Trace Cut Method B. Auxiliary Key Code Cut Method
SA-004-22a2022-05-05. Service bulletin. ELECTRICAL SYSTEM. Customers having MAZDA CONNECT concerns should have their vehicle repaired using the following repair procedure.
SA-014-222022-04-06. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. Accessory instructions can be found on OneMazda under Dealer Resources - Parts & Accessories.
SA-013-222022-04-06. Service bulletin. ENGINE. A new cylinder head assembly for service parts has been newly established for SKYACTIV-G 2.5 with cylinder deactivation when replacement is needed. Valves, valve springs, valve spring seats, and cotters (IN/EX) are included in the new assembly.
SA-012-222022-04-06. Service bulletin. ELECTRICAL SYSTEM; EQUIPMENT; TIRES; EQUIPMENT ADAPTIVE/MOBILITY. Some customers may complain about the infotainment system and/or the MyMazda App showing incorrect tire pressures and/or tire pressure missing. This may be caused by: Incorrect calendar entry (month/day/year) after a battery disconnect *Infotainment system software update. *BCM TPMS unlearn during vehicle storage or transport. *Wheel/Tire change
SA-006-22a2022-04-06. Service bulletin. EQUIPMENT:MECHANICAL; POWER TRAIN; WHEELS. There have been warranty claims submitted for growling or bearing whine noise in differentials, transfer units and transmissions where the source of the noise was a wheel bearing. This misdiagnosis can lead to multiple repair attempts, warranty debits, and additional inconvenience and/or cost to the customer. To reduce the chance of this occurring, please follow the steps outlined in the repair procedure.
SA-003-22d2022-04-06. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE. Mazda3 and CX-30: Prior to February 8, 2022, some vehicles may store DTC U0300:57 (Body control module (BCM) internal malfunction) and cannot be erased after a BCM replacement or MDARS BCM software update (NOT with BCM update for SSPC5 or 4621B using MDRT). This is caused by a BCM-VCM software error. MX-30: Some MX-30 vehicles may store DTC U0300:57 (Body control module (BCM) internal malfunction) and cannot be erased after a BCM replacement or MDARS BCM software update. This is caused by a BCM-VCM software error. Mazda is aware of the issue and is working on a resolution. If there is an issue with this concern, Mazda recommends putting customer in a loaner vehicle at this time. *DO NOT perform BCM software update with MDARS until further notice. *This SA will be updated with the newest repair information as it becomes available.
SA-003-22c2022-04-06. Service bulletin. ELECTRICAL SYSTEM:BODY CONTROL MODULE/BCM; ELECTRICAL SYSTEM:ADAS:HUD:SOFTWARE. Mazda3 and CX-30: Prior to February 8, 2022, some vehicles may store DTC U0300:57 (Body control module (BCM) internal malfunction) and cannot be erased after a BCM replacement or MDARS BCM software update (NOT with BCM update for SSPC5 or 4621B using MDRT). This is caused by a BCM-VCM software error. MX-30: Some MX-30 vehicles may store DTC U0300:57 (Body control module (BCM) internal malfunction) and cannot be erased after a BCM replacement or MDARS BCM software update. This is caused by a BCM-VCM software error. Mazda is aware of the issue and is working on a resolution. If there is an issue with this concern, Mazda recommends putting customer in a loaner vehicle at this time. •DO NOT perform BCM software update with MDARS until further notice. •This SA will be updated with the newest repair information as it becomes available.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.