WenmarOpen by Wenmar Pro

Service bulletins for the 2021 Jeep Wrangler

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

1062 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

Only bulletins with component: Lighting are shown. Show all

Bulletins, newest first
03002242024-03-18. Service bulletin. EXTERIOR LIGHTING; BACK OVER PREVENTION. Front and Rear Axle Sensor Kit **Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that the following Diagnostic Trouble Code (DTC) has been set: ? C1451-11 - Service Axle Locker System** Customers may also comment on a Service Axle Locker message displayed in the Electronic Vehicle Information Center (EVIC) for this condition.
23004242024-03-18. Service bulletin. EXTERIOR LIGHTING:HEADLIGHTS. Headlamp Condensation Clearing Procedure Some customers may report that on occasion, vehicle exterior head lamp assemblies are fogged with a light layer of condensation on the inside of the lenses.
08249232024-01-16. Service bulletin. EXTERIOR LIGHTING. Flash: Battery Pack Control Module (BPCM) Diagnostic and System Update Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more of the following Diagnostic Trouble Codes (DTCs) have been set: ? P0607-00 - ECU Internal Performance. ? P0C78-00 - Hybrid/EV Battery System Precharge Time Too Long. This bulletin involves updating the BPCM with the latest available software.
23029232024-01-02. Service bulletin. EXTERIOR LIGHTING:HEADLIGHTS. Headlamp Condensation Clearing Procedure Some customers may report that on occasion, vehicle exterior head lamp assemblies are fogged with a light layer of condensation on the inside of the lenses (Fig. 1) . This bulletin is to communicate the procedure for head lamp condensation clearing.
08048232024-01-02. Service bulletin. ELECTRICAL SYSTEM; POWER TRAIN; BACK OVER PREVENTION; EXTERIOR LIGHTING. Flash: Battery Pack Control Module (BPCM) Diagnostic and System Updates Customers may experience a false Malfunction Indicator Lamp (MIL) illumination related to PHEV battery: ? P1A21-00 - HV Battery Contactor Control Sequence Incorrect. ? P0B3E-00 - Hybrid/EV Battery Voltage Sense 1 Circuit High. ? P0607-00 - ECU Internal Performance. ? P1E1B-00 - Hybrid/EV Battery Side Voltage System Isolation. ? P0AA4-00 - Hybrid Battery Negative Contactor Circuit Stuck Closed. ? P1C00-00 - Hybrid/EV Battery Voltage Sense 1 Out Of Range Low. ? P1C01-00 - Hybrid/EV Battery Voltage Sense 1 Out Of Range High. ? P1A9B-00 - Hybrid/EV Battery Temperature Sensor 1 Out Of Range High. ? P0BBD-00 - Hybrid Battery Pack Voltage Variation Exceeded Limit. ? P167B-00 - Controlled System Shutdown. ? U1885-00 - Battery Energy Control Module Lost Communication With HCP. ? P0EDD-00 - Hybrid/EV Battery Pack B Deterioration. ? U0111 - Lost Communication With Hybrid Battery Pack Sensor Module. ? P0CA7-00 - Hybrid/EV Battery Discharging Current High. ? P1A0C-00 - Battery Energy Control Module System Voltage Low. This bulletin involves updating the BPCM with the latest available software. NOTE: Additional module flashes are required for this update to be effective, the following modules are all to be updated along with this BPCM update: ? Powertrain Control Module (PCM). ? Integrated Dual Charging Module (IDCM). ? Transmission Control Module (TCM). ? Battery Pack Control Module (BPCM). ? Hybrid Control Processor (HCP), Auxiliary Hybrid Control Processor (AHCP) also known as the Power Inverter Module (PIM).
08047232024-01-02. Service bulletin. POWER TRAIN; ELECTRICAL SYSTEM; EXTERIOR LIGHTING. Flash: Integrated Dual Charging Module (IDCM) Enhancements Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find the following DTCs have been set: ? **B22A9-16 - ECU Internal Performance-Circuit Voltage Below Threshold. ? B22A9-17 - ECU Internal Performance-Circuit Voltage Above Threshold. ? B22A9-19 - ECU Internal Performance-Overcurrent.** ? B22A9-64 - ECU Internal Performance-Signal Plausibility Failure. ? P0D27-00 - Battery Charger 1 Input Voltage Too Low. Customer may also experience the following: ? **Unable to charge the vehicle with level 2 charger.** ? Vehicle would not charge and the charge station circuit breaker in the house / receptacle trips when its plugged into the vehicle. This bulletin involves reprogramming the IDCM with the latest software available. NOTE: Additional module flashes are required for this update to be effective, the following modules are all to be updated along with this IDCM update: ? Powertrain Control Module (PCM). ? Integrated Dual Charging Module (IDCM). ? Transmission Control Module (TCM). ? Battery Pack Control Module (BPCM). ? Hybrid Control Processor (HCP), Auxiliary Hybrid Control Processor (AHCP) also known as the Power Inverter Module (PIM).
S20250000012024-01-02. Service bulletin. EXTERIOR LIGHTING; BACK OVER PREVENTION. Malfunction Indicator Lamp Illumination (MIL). Diagnostic Trouble Code (DTC) P203E ? Reductant Level Sensor 1 Circuit Intermittent-Erratic Set.
23029232023-04-17. Service bulletin. EXTERIOR LIGHTING:HEADLIGHTS. Headlamp Condensation Clearing Procedure Some customers may report that on occasion, vehicle exterior head lamp assemblies are fogged with a light layer of condensation on the inside of the lenses (Fig. 1) . This bulletin is to communicate the procedure for head lamp condensation clearing.
08048232023-04-17. Service bulletin. ELECTRICAL SYSTEM; POWER TRAIN; EXTERIOR LIGHTING; BACK OVER PREVENTION. Flash: Battery Pack Control Module (BPCM) Diagnostic and System Updates Customers may experience a false Malfunction Indicator Lamp (MIL) illumination related to PHEV battery: ? P1A21-00 - HV Battery Contactor Control Sequence Incorrect. ? P0B3E-00 - Hybrid/EV Battery Voltage Sense 1 Circuit High. ? P0607-00 - ECU Internal Performance. ? P1E1B-00 - Hybrid/EV Battery Side Voltage System Isolation. ? P0AA4-00 - Hybrid Battery Negative Contactor Circuit Stuck Closed. ? P1C00-00 - Hybrid/EV Battery Voltage Sense 1 Out Of Range Low. ? P1C01-00 - Hybrid/EV Battery Voltage Sense 1 Out Of Range High. ? P1A9B-00 - Hybrid/EV Battery Temperature Sensor 1 Out Of Range High. ? P0BBD-00 - Hybrid Battery Pack Voltage Variation Exceeded Limit. ? P167B-00 - Controlled System Shutdown. ? U1885-00 - Battery Energy Control Module Lost Communication With HCP. ? P0EDD-00 - Hybrid/EV Battery Pack B Deterioration. ? U0111 - Lost Communication With Hybrid Battery Pack Sensor Module. ? P0CA7-00 - Hybrid/EV Battery Discharging Current High. ? P1A0C-00 - Battery Energy Control Module System Voltage Low. This bulletin involves updating the BPCM with the latest available software. NOTE: Additional module flashes are required for this update to be effective, the following modules are all to be updated along with this BPCM update: ? Powertrain Control Module (PCM). ? Integrated Dual Charging Module (IDCM). ? Transmission Control Module (TCM). ? Battery Pack Control Module (BPCM). ? Hybrid Control Processor (HCP), Auxiliary Hybrid Control Processor (AHCP) also known as the Power Inverter Module (PIM).
08047232023-04-17. Service bulletin. EXTERIOR LIGHTING; POWER TRAIN; ELECTRICAL SYSTEM. Flash: Integrated Dual Charging Module (IDCM) Enhancements Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find the following DTCs have been set: ? **B22A9-16 - ECU Internal Performance-Circuit Voltage Below Threshold. ? B22A9-17 - ECU Internal Performance-Circuit Voltage Above Threshold. ? B22A9-19 - ECU Internal Performance-Overcurrent.** ? B22A9-64 - ECU Internal Performance-Signal Plausibility Failure. ? P0D27-00 - Battery Charger 1 Input Voltage Too Low. Customer may also experience the following: ? **Unable to charge the vehicle with level 2 charger.** ? Vehicle would not charge and the charge station circuit breaker in the house / receptacle trips when its plugged into the vehicle. This bulletin involves reprogramming the IDCM with the latest software available. NOTE: Additional module flashes are required for this update to be effective, the following modules are all to be updated along with this IDCM update: ? Powertrain Control Module (PCM). ? Integrated Dual Charging Module (IDCM). ? Transmission Control Module (TCM). ? Battery Pack Control Module (BPCM). ? Hybrid Control Processor (HCP), Auxiliary Hybrid Control Processor (AHCP) also known as the Power Inverter Module (PIM).
S20250000012023-04-17. Service bulletin. BACK OVER PREVENTION; EXTERIOR LIGHTING. Malfunction Indicator Lamp Illumination (MIL). Diagnostic Trouble Code (DTC) P203E ? Reductant Level Sensor 1 Circuit Intermittent-Erratic Set.
18-012-232023-02-13. Service bulletin. EXTERIOR LIGHTING; ELECTRICAL SYSTEM; POWER TRAIN. Flash: Powertrain Control Module (PCM) Updates Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more of the following Diagnostic Trouble Code (DTC). U0402-00 - Implausible Data Received From TCM. U145D - Implausible Data Received From TCM On D-PT. Customers may experience one or more of the following: Vehicle may not be able to enter electric mode driving while Fuel Oil Refresh Mode (FORM) is active. FORM staying on too long. Other software enhancement included with this update: On Board Fuel Consumption Monitoring Updates (China Only) This bulletin involves reprogramming the PCM with the latest available software. NOTE: Additional module flashes are required for this update to be effective, the following modules are all to be updated along with this PCM update: Hybrid Control Processor (HCP), Auxiliary Hybrid Control Processor (AHCP) also known as the Power Inverter Module (PIM). Transmission Control Module (TCM). Battery Pack Control Module (BPCM). Integrated Dual Charging Module (IDCM).
08-029-232023-02-13. Service bulletin. EXTERIOR LIGHTING; BACK OVER PREVENTION; POWER TRAIN; ELECTRICAL SYSTEM. Flash: Hybrid Control Processor (HCP) and Auxiliary Hybrid Control Processor (AHCP) Updates Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more of the following Diagnostic Trouble Codes (DTCs). P061B-00 - Internal Control Module Torque Calculation Performance. NOTE: P061B-00 DTC may set after driving on snow/ice in 2WD and Traction Control System (TCS) turned off. P06A3-00 - Sensor Reference Voltage 9D9 Circuit/Open. P0697-00 - Sensor Reference Voltage 3 Circuit. Other software enhancement included with this update: On Board Fuel Consumption Monitoring Updates (China Only). **Customers may experience one or more of the following: Vehicle may not be able to enter electric mode driving while Fuel Oil Refresh Mode (FORM) is active. FORM staying on too long.** This bulletin involves reprogramming the HCP and AHCP or also known as Power Inverter Module (PIM) with the latest available software. NOTE: Additional module flashes are required for this update to be effective, the following modules are all to be updated along with this HCP and AHCP update: Powertrain Control Module (PCM). Transmission Control Module (TCM). Battery Pack Control Module (BPCM). Integrated Dual Charging Module (IDCM)
S23180000022023-02-13. Service bulletin. EXTERIOR LIGHTING. Malfunction Indicator Lamp (MIL) Illumination. Intake Manifold Runner Valve Diagnostic Trouble Codes (DTCs) Setting In Extreme Cold Ambient Temperatures.
91000962023-01-17. Service bulletin. EXTERIOR LIGHTING:HEADLIGHTS; EXTERIOR LIGHTING. Base Headlamp Bright, Base Headlamp Black
S2208000054RevA2023-01-17. Service bulletin. EXTERIOR LIGHTING; ELECTRICAL SYSTEM. Left Headlight, Park Lamp Flickers Or Is Inoperative. B162A, B163A, B1632, B16CF
S19250000082023-01-17. Service bulletin. EXTERIOR LIGHTING; FUEL SYSTEM, GASOLINE; SERVICE BRAKES, HYDRAULIC. Malfunction Indicator Lamp (MIL) Illumination. Diagnostic Trouble Codes (DTCs) P208B ? Reductant Pump 1 Control Performance, and/or P20E8 ? Reductant Pressure Too Low, Set.
14002212023-01-17. Service bulletin. EXTERIOR LIGHTING; FUEL SYSTEM, GASOLINE. Incorrect Fuel Delivery Module This bulletin involves replacing the fuel pump module. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that the following Diagnostic Trouble Codes (DTCs) have been set: P062A - Fuel Pump Control Performance. DTC is set due to the fuel tank was assembled with the incorrect fuel pump. The customer may also experience the following:A reduced level of performance or performance issues when requesting Wide Open Throttle (WOT).
18-051-22 REV. B2023-01-17. Service bulletin. ELECTRICAL SYSTEM; EXTERIOR LIGHTING; POWER TRAIN. Flash: Powertrain Control Module (PCM) Updates Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more of the following Diagnostic Trouble Code (DTC). ? U0402-00 - Implausible Data Received From TCM. ? U145D - Implausible Data Received From TCM On D-PT. **Customers may experience one or more of the following: ? Vehicle may not be able to enter electric mode driving while Fuel Oil Refresh Mode (FORM) is active. ? FORM staying on too long.** Other software enhancement included with this update: ? On Board Fuel Consumption Monitoring Updates (China Only). This bulletin involves reprogramming the PCM with the latest available software. NOTE: Additional module flashes are required for this update to be effective, the following modules are all to be updated along with this PCM update: ? Hybrid Control Processor (HCP), Auxiliary Hybrid Control Processor (AHCP) also known as the Power Inverter Module (PIM). ? Transmission Control Module (TCM). ? Battery Pack Control Module (BPCM). ? Integrated Dual Charging Module (IDCM)
S20250000062023-01-09. Service bulletin. BACK OVER PREVENTION; EXTERIOR LIGHTING. Malfunction Indicator Lamp (MIL) Illumination. Diagnostic Trouble Code (DTC) P206D ? Reductant Quality Sensor Circuit High Set.
08032222023-01-09. Service bulletin. ELECTRICAL SYSTEM; EXTERIOR LIGHTING. Flash: Anti-Lock Brake System (ABS) Module Updates This bulletin involves reprogramming the ABS module with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that one of the following Diagnostic Trouble Code (DTC) has been set: C055F-00 - ABS Hydraulic Unit Performance.The software update will correct C055F-00 if it is a stored fault. If the fault is active, follow normal DTC diagnostics in Service Library.
14004222023-01-09. Service bulletin. EXTERIOR LIGHTING; FUEL SYSTEM, GASOLINE. Updated Fuel Filler Cap and Fuel Filler Tube This bulletin involves updating the upper fuel filler tube and cap with improved versions. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that one or more of the following Diagnostic Trouble Codes (DTCs) have been set: P04EC - EVAP System Large Leak Detected - Fuel Tank Side. P04EE - EVAP System Very Small Leak Detected - Fuel Tank Side. Customers may also comment the following:There is a "Check Gas Cap" message in the Instrument Panel Cluster (IPC).The above condition is caused from an air leak through the fuel filler cap and fuel filler neck seal.
18041222023-01-09. Service bulletin. EXTERIOR LIGHTING; ELECTRICAL SYSTEM. Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find the following DTC: P0300 - Multiple Cylinder Misfire. In addition, customers may experience the following concern: Spark knock/detonation sound from the engine at idle.
18051222023-01-09. Service bulletin. EXTERIOR LIGHTING; ELECTRICAL SYSTEM; POWER TRAIN. Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more of the following Diagnostic Trouble Code (DTC). U0402-00 - Implausible Data Received From TCM. U145D - Implausible Data Received From TCM On D-PT. Other software enhancement included with this update:On Board Fuel Consumption Monitoring Updates (China Only). Additional module flashes are required for this update to be effective, the following modules are all to be updated along with this PCM update:Hybrid Control Processor (HCP), Auxiliary Hybrid Control Processor (AHCP) also known as the Power Invertor Module (PIM). Transmission Control Module (TCM). Battery Pack Control Module (BPCM). Integrated Dual Charging Module (IDCM).
S22080001552022-11-07. Service bulletin. EXTERIOR LIGHTING; ELECTRICAL SYSTEM:12V/24V/48V BATTERY. Battery Charge Indicator (BCI) Does Not Illuminate

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.