WenmarOpen by Wenmar Pro

Service bulletins for the 2013 Jeep Grand Cherokee

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

291 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Bulletins, newest first
S20080001132022-09-26. Service bulletin. ELECTRICAL SYSTEM. No Start Intermittently, Vehicle Requires Multiple Keyless Push To Start Attempts To Start Vehicle, Intermittent Key Not Detected Message
S18210000012022-09-26. Service bulletin. POWER TRAIN. Gear Ratio DTC?s, Transmission Shift Concerns, Does Not Shift At Times, Shudders
90040092022-09-26. Service bulletin. POWER TRAIN. Transmission Kit with Torque Converter 1. All Promaster (VF) 3.6L/62TE equipped vehicles. If the transmission bracket to the transmission case fasteners are removed during servicing, the fasteners (Part Number 06511385A$) are one-time usage. Vehicles built prior to 10/23/2015 requires Service Kit PN 68461214AA; includes Transmission Isolator PN 68264483AA, and Adaptation Bracket 68264479AA and Fastener Service Kit PN 68329056AA Vehicles built after on or after 10/23/2015 will require only the Fastener Service Kit PN 68329056AA. 2. All 3.6L/62TE equipped vehicles. If the vehicle you are repairing has a crack in the flex plate or failed pump bushing inspect and confirm that both (2) dowel pins are present in the engine block, which align the transmission center line to the crank shaft centerline and visually inspect the dowel alignment holes in the transmission case. If the holes are damaged or elongated the transmission should be replaced to prevent further damage to the transmission/flexplate or pump bushing due to the inability to properly align the engine to the transmission during the repair. 3. All 62TE equipped vehicles. If pump bushing is scored or damaged and the dowel pin alignment holes are ok, replace the pump assembly as opposed to complete transmission. 4. All 62TE equipped vehicles. If vehicle is jerking/slipping with MIL code(s) P0740 or P2764, check TCC Solenoid operation. If TCC Solenoid is ok, the codes are indicative of a torque converter failure. Replace the torque converter.
08112142022-09-26. Service bulletin. ELECTRICAL SYSTEM. Hands Free Feature Inoperative This bulletin involves updating the Hands Free Module (HFM) software. The customer may notice that the hands free feature (Bluetooth) does not work. On further inspection Diagnostic Trouble Code (DTC), U0197 - Lost Communication With Hands Free Phone Module may be found.
0900214REVB2022-09-26. Service bulletin. EXTERIOR LIGHTING; FUEL SYSTEM, GASOLINE. MIL Illumination: P0300, P0302, P0304 or P0306 (X56 Warranty Extension) This bulletin involves checking for excessive cylinder leakage and replacing the cylinder head if necessary. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the Technician may find that any the following Diagnostic Trouble Codes have been set: P0300- Multiple Cylinder Misfire P0302- Cylinder 2 Misfire P0304- Cylinder 4 Misfire P0306- Cylinder 6 Misfire
S1723000007RevF2022-09-26. Service bulletin. SUSPENSION; ELECTRONIC STABILITY CONTROL:AUTOMATIC (ASC). Air Suspension Inoperative And Or Compressor Freeze Up Or Sticking In Cold Weather.
S1709000010RevB2022-09-26. Service bulletin. ENGINE AND ENGINE COOLING:ENGINE:CRANK/CAMSHAFT POSITION SENSOR; UNKNOWN OR OTHER. Customer complaints may include abnormal engine noise, rough idle, lack of power, misfire. Upon investigation, it may be found that there is excessive camshaft lobe wear/lifter wear (roller failure) on one or more cam lobes and that camshaft/lifter replacement is necessary.
90043512022-09-26. Service bulletin. SERVICE BRAKES. PLATE - CLUTCH PRESSURE For 68RFE trans use selective fit pressure plates between the overdrive and reverse clutch packs and hence use all three 52119929A$, 52119930A$, 04799116A$ maintain clearance For 65RFE & 66RFE no selectives for this pressure plate: 65RFE use 04799116A$ 66RFE use 52119929A$
P360701142022-09-26. Service bulletin. EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. Recall Advanced Communication.
08041152022-09-26. Service bulletin. SEATS. Front heated seats improvements.
05005132022-09-26. Service bulletin. BACK OVER PREVENTION. Squeal Noise From Front Of Vehicle When Braking This bulletin involves verifying the front vehicle noise and if necessary replace the front brake pads. Squeal noise from front of vehicle when braking.
31005192022-09-15. Service bulletin. STRUCTURE. Use of Aftermarket Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of aftermarket parts.
31003192022-09-15. Service bulletin. STRUCTURE. Use of Salvage/Recycled Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of recycled or salvage parts.
31004192022-09-15. Service bulletin. VISIBILITY. Authentic Mopar® Glass Replacement This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the recommended usage of Authentic Mopar® Glass.
31006192022-09-15. Service bulletin. STRUCTURE; EQUIPMENT. Repair Parts Used For Structural Repairs This bulletin involves discussing FCA US LLC position with regard to structural repair parts usage.
90031092022-09-15. Service bulletin. VISIBILITY:WINDSHIELD WIPER/WASHER. Washer Fluid Level Sensor Prior to replacing this part due to "Low Washer Fluid" tell tale light on the dash and the washer fluid bottle is full, please perform this inspection: Check if float sensor is rotated off location from the bottle anti-rotation features that surround the SENSOR. Check to determine if the issue has been resolved. Continue with repair if necessary. Please contact Chris Koch at cell (248) 248-622-6417 if you have questions or need additional information.
68206429A2022-09-15. Service bulletin. SEATS. Pad, Seat Cushion Before replacing the above part(s), please call the Micah Straub (engineer) at cell (248) 613-2478. Engineering is gathering information regarding this system. If no response in 15 minutes, proceed with repair.
23016162022-09-15. Service bulletin. SEATS:MID/REAR ASSEMBLY:HEAD RESTRAINT. Customers may describe a chirping or squeaking coming from the rear second row seat headrest(s) while driving.
02-003-142022-08-29. Service bulletin. SUSPENSION. Vehicle Leads or Drifts To The Right This bulletin involves an alignment specification change for camber. Customer may describe a lead or drift to the right condition at steady state speeds at 35 MPH and above.
21-014-142022-08-29. Service bulletin. ELECTRICAL SYSTEM; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE:SOFTWARE; TRAILER HITCHES; POWER TRAIN. Flash: Transmission Shift Enhancements This bulletin involves selectively erasing and reprogramming the Transmission Control Module (TCM) with new software. NOTE: This bulletin applies to the following vehicles: • Wrangler vehicles equipped with the WA580 Automatic Transmission (Sales Code DGJ) • Challenger vehicles equipped with either the 3.6L engine (Sales Code ERB) or the 6.4L Engine (Sales Code ESH or ESG) and the WA580 Automatic Transmission (.Sales Code DGJ) • Durango vehicles equipped with the 3.6L engine (Sales Code ERB) and the WA580 Automatic Transmission (Sales Code DGJ) • Grand Cherokee vehicles equipped with the 6.4L engine (Sales Code ESG) for all markets except Australia (Sales Code 8AL) or the 3.6L engine (Sales Code ERB) (All Markets) and the WA580 Automatic Transmission (Sales Code DGJ). Australian vehicles equipped with the 6.4L can refer to Service Bulletin 21-010-14
24-002-142022-08-29. Service bulletin. VISIBILITY:DEFROSTER/DEFOGGER/HVAC SYSTEM. Driver And Passenger HVAC Blower Air Temperatures Are Not The Same When ?Sync? Setting Mode Is Selected And Headlamps Always Stay On. This bulletin involves selectively replacing the solar sensor. Customers may experience the following condition: When using the Automatic Temperature Control ?SYNC? mode, left and right outlet temperatures do not match regardless of the desired temperature setting is the same. Occupants will experience being cold (winter time), on either passenger or driver side, even though the temperature setting is the same. Headlamps are always staying on, when they are set to Auto mode.
23-010-142022-08-29. Service bulletin. STRUCTURE. Click, Creak, Or Groaning Sound Near C-Pillar, Dual Pane Sunroof (Sales Code GWJ) This bulletin involves inspecting and if necessary replacing rear sunroof glass panel or adding structural adhesive at the right rear corner C-Pillar sunroof opening reinforcement. Click, creak, or groaning sound near C-pillar at rear corner of sunroof.
21-010-142022-08-29. Service bulletin. POWER TRAIN. Transmission Torque Management Enhancements While in Reverse This bulletin involves replacing the transmission control module with a revised part. Customers may indicate that the engine does not have enough power to back a trailer up a steep grade. In addition, they may also indicate that the transmission shifts too early during acceleration while turning.
18-026-142022-08-29. Service bulletin. POWER TRAIN. Flash: Powertrain System Improvements/Enhancements This bulletin involves selectively erasing and reprogramming the Powertrain Control Module (PCM) with new software. The following powertrain system improvements/enhancements are included in this software release: Automatic Oil Change Indicator(AOCI) system enhancements that force the use of the severe duty cycle algorithm anytime the PCM is replaced. The vehicle duty cycle information used in the AOCI calculation is stored in the PCM and cannot be recovered/transferred when the controller is replaced. As a result, the severe duty cycle is used in these scenarios to ensure the customer receives a timely oil change required message.
90030812022-08-29. Service bulletin. ELECTRICAL SYSTEM. Dielectric Grease This product is no longer approved for use on ignition coil and spark plug boots. Current plug boot material(silicone) is not compatible with this grease and can cause deterioration over time.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.