Service bulletins for the 2017 Infiniti QX80
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
135 on file from NHTSA, as of 2026-10-19.
By type
By component
By trouble code
Only bulletins with component: Electrical system are shown. Show all
| ITB13-052C | 2021-05-08. Service bulletin. ELECTRICAL SYSTEM; EQUIPMENT. INTELLIGENT KEY NOT DETECTED / ENGINE WILL NOT START This bulletin has been amended to update the Applied Vehicles. No other changes were made. Please discard previous versions of this bulletin. |
|---|---|
| ITB17-015B | 2021-05-08. Service bulletin. EQUIPMENT; ELECTRICAL SYSTEM. NAVIGATION SYSTEM REBOOTS WHEN SXM TRAFFIC IS ENABLED This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin. |
| ITB19-024A | 2021-04-13. Service bulletin. ELECTRICAL SYSTEM. DTC B00A0-00 STORED This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin. |
| ITB17-056B | 2021-04-08. Service bulletin. EQUIPMENT; ELECTRICAL SYSTEM; EQUIPMENT ADAPTIVE/MOBILITY. INTELLIGENT KEY BATTERY DISCHARGED This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin. |
| ITB18-005B | 2021-04-08. Service bulletin. EQUIPMENT; ELECTRICAL SYSTEM. ADAS SYSTEM DTC C1A03, C1A04, AND/OR C1B01 SERVICE INFORMATION This bulletin has been amended. Please see AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin. |
| ITB17-005A | 2021-04-08. Service bulletin. ELECTRICAL SYSTEM. BLUETOOTH, USB, AND AUX FUNCTION DIAGNOSTIC TOOL This bulletin has been amended. See AMENDMENT HISTORY on page 3. Please discard previous versions of this bulletin. |
| ITB16-006A | 2021-04-08. Service bulletin. ELECTRICAL SYSTEM. INFINITI; FRONT SONAR PARKING SENSOR SERVICE INFORMATION This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin. |
| ITB12-011P | 2021-04-08. Service bulletin. EQUIPMENT; EQUIPMENT ADAPTIVE/MOBILITY; ELECTRICAL SYSTEM. TELEMATICS SERVICE INFORMATION This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin. |
| ITB20-023a | 2021-03-06. Service bulletin. ELECTRICAL SYSTEM; FORWARD COLLISION AVOIDANCE; EQUIPMENT. LANE CAMERA AIMING VEHICLE REFERENCE VALUES NOT IN ESM This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin. |
| ITB17-056a | 2021-02-06. Service bulletin. ENGINE AND ENGINE COOLING; ELECTRICAL SYSTEM. INTELLIGENT KEY BATTERY DISCHARGED This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin. |
| ITB20-023 | 2020-10-08. Service bulletin. ELECTRICAL SYSTEM; LANE DEPARTURE. LANE CAMERA AIMING VEHICLE REFERENCE VALUES NOT IN ESM SERVICE INFORMATION If the lane camera requires aiming, the values in Table A on page 4 must be used. • For all other models, consult the Electronic Service Manual (ESM). The following CONSULT-III plus (C-III plus) figures and steps are only provided to indicate where the VEHICLE REFERENCE VALUE from Table A is to be entered. The entire camera aiming procedure must be followed to complete the aiming procedure. • Refer to the Electronic ESM section: CRUISE CONTROL & DRIVER ASSISTANCE > DRIVER ASSISTANCE SYSTEM > DRIVER ASSISTANCE SYSTEM > BASIC INSPECTION > LANE CAMERA UNIT > CAMERA AIMING ADJUSTMENT. 1. Turn the ignition ON. 2. From the C-III plus home screen, select Diagnosis (One System). |
| ITB20-005 | 2020-03-06. Service bulletin. EQUIPMENT ADAPTIVE/MOBILITY; FUEL SYSTEM, GASOLINE; ELECTRICAL SYSTEM:SOFTWARE. 2016-2019 QX80; MIL ON WITH DTC P0174 IF YOU CONFIRM The MIL is ON and only DTC P0174 (FUEL SYS LEAN B2) is stored in the ECM. ACTION 1. Confirm the current ECM part number. 2. Reprogram the ECM, if applicable. |
| ITB19-024 | 2019-10-08. Service bulletin. SEATS; ELECTRICAL SYSTEM; AIR BAGS. DTC B00A0-00 STORED IF YOU CONFIRM DTC B00A0-00 (OCCUPANT DETECTION SENSOR UNIT) is stored And OCS zero point reset cannot be performed And The following screen will display: ACTION 1. Check the Occupant Classification System (OCS) control unit using the ODS Analysis tool software. • Refer to SERVICE PROCEDURE on the next page. HINT: “OCS” may also be referred to as “ODS”. 2. Perform “75-zero RESET”. |
| ITB19-006 | 2019-04-15. Service bulletin. ELECTRICAL SYSTEM; EQUIPMENT. INFINITI; MIL ON WITH DTC P219A AND/OR P219B STORED SERVICE INFORMATION If the MIL is ON and DTC P219A (AIR FUEL RATIO IMBALANCE B1) and/or P219B (AIR FUEL RATIO IMBALANCE B2) is stored: - DO NOT replace the Air Fuel Ratio (A/F) sensor. - Refer to the applicable Electronic Service Manual (ESM) and follow the diagnostic procedure for DTC P219A and/or P219B. |
| ITB12-011k | 2018-05-14. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE. TELEMATICS SERVICE INFORMATION This bulletin has been amended. Changes have been made throughout. It is necessary to read the revised procedure(s) in entirety to properly perform the action(s). Please discard previous versions of this bulletin. |
| ITB18-007a | 2018-03-26. Service bulletin. ELECTRICAL SYSTEM. 2017 QX80; DTC C1116 AND VDC WARNING LAMP ON This bulletin applies only to vehicles equipped with Distance Control Assist (DCA). This bulletin has been amended. The CLAIMS INFORMATION section has been corrected. No other change have been made. Please discard previous versions of this bulletin. |
| ITB18-007 | 2018-03-26. Service bulletin. ELECTRICAL SYSTEM. 2017 QX80; DTC C1116 AND VDC WARNING LAMP ON This bulletin applies only to vehicles equipped with Distance Control Assist (DCA). IF YOU CONFIRM DTC C1116 (STOP LAMP SW) is stored (Past or Current), AND Customer stated VDC warning lamp was illuminated. ACTION Reprogram the ABS control unit (ABS) per the Service Procedure in this bulletin. - Refer to step 20 on page 8 to confirm that reprogramming is needed. |
| ITB12-011j | 2018-02-21. Service bulletin. ELECTRICAL SYSTEM:SOFTWARE; ELECTRICAL SYSTEM; EQUIPMENT:ELECTRICAL:NAVIGATIONAL SYSTEM(GLOBAL POSITIONING SYSTEM). TELEMATICS SERVICE INFORMATION This bulletin has been amended. A correction was made to the Service Procedure on page 15. No other changes were made. Please discard previous versions of this bulletin. |
| ITB17-010 | 2017-10-25. Service bulletin. ELECTRICAL SYSTEM. 2016-2017 QX80; MIL ON WITH P0090 AND U1000 AND/OR U1001 STORED IF YOU CONFIRM MIL is ON with the following DTC stored: - P0090 (FRP CONTROL SYSTEM) And U1000 and/or U1001 DTCs are stored in one or more other control units. NOTE: If P0090 is set and U1000 and/or U1001 DTCs are not set, this Bulletin does not apply. Refer to the Electronic Service Manual (ESM) for further diagnostic information. ACTION Replace the IPDM with one listed in the Parts Information. |
| ITB09-015h | 2017-10-15. Service bulletin. ELECTRICAL SYSTEM:12V/24V/48V BATTERY. 12 VOLT BATTERY STORAGE AND MAINTENANCE FOR NEW VEHICLES IN RETAILER INVENTORY This bulletin has been amended throughout. Please discard all previous versions of this bulletin. |
| ITB17-015 | 2017-08-01. Service bulletin. EQUIPMENT:ELECTRICAL:NAVIGATIONAL SYSTEM(GLOBAL POSITIONING SYSTEM); ELECTRICAL SYSTEM:SOFTWARE. NAVIGATION SYSTEM REBOOTS WHEN SXM TRAFFIC IS ENABLED IF YOU CONFIRM The Navigation system in an Applied Vehicle reboots when SXM Traffic is enabled. NOTE: Perform the steps in this bulletin ONLY if the above condition occurs while the vehicle is in the state of Oregon. ACTION Update the Navigation system software using the DVD shown on page 2. |
| P6335 QX80 ECM R | 2017-08-01. Service bulletin. POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM); ELECTRICAL SYSTEM:SOFTWARE. ECM Reprogram Retailer Inventory ***** Retailer Announcement ***** Infiniti is conducting a retailer inventory service action to Update Electronic Control Module (ECM) software on 1,874 specific 2017 QX80 vehicles identified in Service Comm. On the affected vehicles, the ECM software is being updated to refine the MIL illumination logic for the exhaust gas temperature sensor. Affected vehicles are not subject to stop sale and are either currently in retailer inventory or assigned and in transit to the retailer. Infiniti requests retailers complete this software update prior to sale to ensure client satisfaction. ***** What Retailers Should Do ***** PLEASE FOLLOW THE ATTACHED REPAIR INSTRUCTIONS: 1. Verify if vehicles are affected by this client satisfaction initiative using Service Comm I.D. P6335 - New vehicles in retailer inventory can also be identified using DCS (Sales-> Vehicle Inventory, and filter by Open Campaign). - Refer to IPSB 15-286 for additional information - Please continue to check newly arriving inventory for campaign applicability. 2. Use the attached procedure to install the updated software. 3. The service department should submit the applicable warranty claim for the action performed so it can be closed on Service Comm and release the vehicle. ***** Retailer Responsibility ***** It is the retailer?s responsibility to check Service Comm using the appropriate campaign I.D for the inspection status on each affected vehicle currently in new vehicle inventory. Infiniti requests retailers to perform this repair on new vehicles in inventory prior to being retailed to ensure client satisfaction. |
The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.