Service bulletins for the 2022 Infiniti QX60
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
119 on file from NHTSA, as of 2026-10-19.
By type
By component
By trouble code
Only bulletins with component: Electrical system are shown. Show all
| ITB13-006C | 2022-03-12. Service bulletin. ELECTRICAL SYSTEM. CAN COMMUNICATION – NETWORK DIAGNOSTIC FLOW CHART This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin. |
|---|---|
| ITB22-003 | 2022-02-10. Service bulletin. ELECTRICAL SYSTEM:BODY CONTROL MODULE/BCM; ELECTRICAL SYSTEM. REAR DOOR ALERT SERVICE INFORMATION SERVICE INFORMATION This bulletin contains supplementary information related to the rear door alert system on the APPLIED VEHICLES. Although the Electronic Service Manual (ESM) should be the primary source of information for inspection, diagnosis, and repair, the supplementary information in this bulletin will assist in these areas. The information in this bulletin includes: • Rear door alert description • How to turn the rear door alert system ON and OFF • Vehicle information display alert/message • Rear door alert operation NOTE: Do not replace the BCM for a rear door alert concern unless all information in this bulletin has been reviewed and the concern has been verified to be abnormal. |
| ITB22-002 | 2022-02-10. Service bulletin. ELECTRICAL SYSTEM; ELECTRICAL SYSTEM:BODY CONTROL MODULE/BCM. BCM SERVICE INFORMATION SERVICE INFORMATION • When replacing the BCM, ALWAYS replace it with a new one. • Module configuration MUST BE performed before pairing the BCM and Intelligent Key unit. Once the BCM and Intelligent Key unit have been paired, portions of the configuration are locked and can no longer be changed. • When replacing the BCM, it is critical to follow the work procedure as detailed in the ESM. o Refer to the ESM: ELECTRICAL & POWER CONTROL > BODY CONTROL SYSTEM > BASIC INSPECTION > ADDITIONAL SERVICE WHEN REPLACING BCM To prevent damage to the BCM, perform module configuration BEFORE pairing the BCM and Intelligent Key unit. |
| ITB22-001 | 2022-02-10. Service bulletin. EQUIPMENT:ELECTRICAL:ANTI-THEFT DEVICES; ELECTRICAL SYSTEM; LATCHES/LOCKS/LINKAGES:DOORS:LOCK. INTELLIGENT KEY SERVICE INFORMATION SERVICE INFORMATION • When replacing the Intelligent Key unit (hands free module), ALWAYS replace it with a new one. • Module configuration MUST BE performed before NATS initialization (key registration). Once NATS initialization has been performed, portions of the configuration are locked and can no longer be changed. • When replacing the Intelligent Key unit, it is critical to follow the work procedure in the ESM. o Refer to the ESM: BODY EXTERIOR, DOORS, ROOF & VEHICLE SECURITY > DOOR & LOCK > BASIC INSPECTION > ADDITIONAL SERVICE WHEN REPLACING INTELLIGENT KEY UNIT To prevent damage to the Intelligent Key unit, perform module configuration BEFORE NATS initialization. |
| ITB21-030A | 2022-02-10. Service bulletin. ELECTRICAL SYSTEM; SERVICE BRAKES. COMBINATION METER MODULES OR ABS CONTROL UNITS CANNOT BE SWAPPED This bulletin has been amended. See AMENDMENT HISTORY below. Please discard previous versions of this bulletin. |
| ITB19-013C | 2022-02-10. Service bulletin. LANE DEPARTURE: ASSIST; LANE DEPARTURE: BLIND SPOT DETECTION; ELECTRICAL SYSTEM. AEB WARNING LIGHT BLINKING This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin. |
| ITB10-029B | 2022-02-09. Service bulletin. ELECTRICAL SYSTEM. CAN COMMUNICATION CODES – DIAGNOSTIC TIPS AND GUIDELINES This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin. |
| ITB21-030 | 2022-01-08. Service bulletin. ELECTRICAL SYSTEM. COMBINATION METERS CANNOT BE SWAPPED SERVICE INFORMATION Do not swap combination meter modules between APPLIED VEHICLES vehicles for any reason. Due to a new electrical architecture, the vehicle mileage is now stored in multiple control modules. When a mileage difference is detected between modules, the module with the lower value will be immediately overwritten, replacing it with the higher mileage. If a new combination meter module is installed, it will automatically be overwritten to the correct vehicle mileage. |
The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.