WenmarOpen by Wenmar Pro

Service bulletins for the 2026 Hyundai Ioniq 9

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

17 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

Only bulletins with type: Service campaign are shown. Show all

Bulletins, newest first
26-01-020H TSB2026-03-04. Service campaign. UNKNOWN OR OTHER. Certain IONIQ 9 (ME1A EV) vehicles may have a sliding center console (rear floor console) that makes a ratcheting noise while being moved forward or backward. This bulletin provides instructions to remove and replace the affected sliding center console.
26-01-001H DCS2026-01-13. Service campaign. EXTERIOR LIGHTING. Certain IONIQ 9 (ME1A EV) vehicles may exhibit adhesive residue on the high mounted stop lamp. This can occur when the clear protective film has had prolonged exposure to sun and heat, causing some of the adhesive to remain on the black plastic housing after removal. Technical Service Bulletin (TSB) 26-01-001H provides instructions to inspect and, if necessary, replace the high mounted stop lamp on affected vehicles.
26-01-001H TSB2026-01-13. Service campaign. EXTERIOR LIGHTING. Certain IONIQ 9 (ME1A EV) vehicles may exhibit adhesive residue on the high mounted stop lamp. This can occur when the clear protective film has had prolonged exposure to sun and heat, causing some of the adhesive to remain on the black plastic housing after removal. This bulletin provides instructions to inspect and, if necessary, replace the high mounted stop lamp on affected vehicles.
25-01-050H-1 DCS2025-10-29. Service campaign. SEATS. Certain IONIQ 9 (ME1A EV) vehicles may have walk-in switches that are not fully secured. Technical Service Bulletin (TSB) 25-01-050H-1 provides instructions to inspect and, if necessary, replace the walk-in switch.
25-01-050H-1 TSB2025-10-28. Service campaign. SEATS. Certain IONIQ 9 (ME1A EV) vehicles may have walk-in switches that are not fully secured. This bulletin provides instructions to inspect and, if necessary, replace the walk-in switch.
25-01-055H TSB2025-08-25. Service campaign. UNKNOWN OR OTHER. Certain IONIQ 9 (ME1A EV) vehicles may exhibit paint peeling from the left upper garnish on the rear bumper. This bulletin provides instructions to replace the left upper garnish on the rear bumper.
25-01-050H TSB2025-07-28. Service campaign. SEATS. Certain IONIQ 9 (ME1A EV) vehicles may have Walk-in switches (A) that are not fully secured. This bulletin provides instructions to inspect and, if necessary, replace the Walk-in switch (A).
25-01-035H TSB2025-06-03. Service campaign. ELECTRICAL SYSTEM. Certain 2026MY IONIQ 9 (ME1A EV) vehicles may have DTC C138201 (Lever Hall Sensor Fault) set in the Electronic Shift Control System which could prevent the vehicle from being shifted out of the “Park” position. This system is also known as Shift-by-Wire Shift Control Unit (SBWSCU). Follow the procedure in this TSB to update the Shift-by-Wire (SBW) software logic.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.