WenmarOpen by Wenmar Pro

Service bulletins for the 2019 Hyundai Elantra

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

117 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Only bulletins with component: Driver assistance are shown. Show all

Bulletins, newest first
21-BE-006H2021-04-06. Service bulletin. FORWARD COLLISION AVOIDANCE. Certain 2019-2020MY Santa Fe and 2018-2020MY Elantra equipped with the front multifunction camera may exhibit one or more of the following warnings on the instrument cluster; Lane Keep Assist System (LKAS), Front Collision Avoidance Assist (FCA), High Beam Assist (HBA), Smart Cruise Control (SCC), and Autonomous Emergency Braking (AEB). This bulletin describes the procedure to replace the front camera/ multi-function camera.
20-BE-006H-12020-10-08. Service bulletin. FORWARD COLLISION AVOIDANCE; LANE DEPARTURE. Certain 2019-2020MY Santa Fe and 2018-2020MY Elantra equipped with the front multifunction camera may exhibit one or more of the following warnings on the instrument cluster; Lane Keep Assist System (LKAS), Front Collision Avoidance Assist (FCA), High Beam Assist (HBA), Smart Cruise Control (SCC), and Autonomous Emergency Braking (AEB). This bulletin describes the procedure to replace the front camera/ multi-function camera.
20-BE-006H2020-05-06. Service bulletin. VEHICLE SPEED CONTROL; FORWARD COLLISION AVOIDANCE; SERVICE BRAKES, HYDRAULIC; EXTERIOR LIGHTING; LANE DEPARTURE. Certain 2019-2020MY Santa Fe and 2018-2020MY Elantra equipped with front camera/multi-function camera may exhibit a series of Lane Keep Assist System (LKAS), Front Collision Avoidance Assist (FCA), High Beam Assist (HBA), Smart Cruise Control (SCC), and Autonomous Emergency Braking (AEB) warnings and function conditions on the instrument cluster. This bulletin describes the procedure to replace the front camera/ multi-function camera.
19-BE-011H-12019-12-16. Service bulletin. LANE DEPARTURE; BACK OVER PREVENTION. The Blind Spot Detection (BSD) or Blind-Spot Collision Warning (BCW) is a system that measures the speed of and distance from the following vehicles by using two magnetic wave radar sensors attached in the rear bumper. The BSD/BCW detects vehicles within the blind spot zone and gives off an alarm (visual and audible). The two magnetic radar sensors provide these functions for BSD/BCW: ? Senses other vehicles in the BSD/BCW zone and turns on the BSD/BCW warning lamp for the driver. The warning lamp starts blinking, along with an audible sound, when the driver turns on the turn signal lamp to enter the lane where another vehicle is driving.
19-BE-016H2019-11-18. Service bulletin. LANE DEPARTURE; EQUIPMENT; EQUIPMENT ADAPTIVE/MOBILITY; FORWARD COLLISION AVOIDANCE. Certain 2019 MY Elantra (ADa) vehicles may experience the Blind-Spot Collision Warning (BCW) light displayed on the instrument cluster. In some cases one and/or two of the following DTCs can be set: ? C2702 ? Control Module Missing Calibration ? C2703 ? Control Module Slave Missing Calibration This bulletin provides the service procedure to replace the left and right Blind-Spot radar modules.
19-BE-008H2019-07-01. Service bulletin. ELECTRICAL SYSTEM; LANE DEPARTURE; FORWARD COLLISION AVOIDANCE. This bulletin provides information for replacement of the Blind-Spot Collision Warning (BCW) module. Whenever the left or right side BCW module is being replaced, it is required to perform the variant coding procedure. If the variant coding procedure is not performed, a DTC C1743 (S/W mismatch) will be triggered.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.