Service bulletin 19-BE-016H
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
| Type | Service bulletin |
|---|---|
| NHTSA id | 10167758 |
| Published by NHTSA | 2019-11-18 |
| Manufacturer's number | 19-BE-016H |
| Manufacturer's date | 2019-10-11 |
| NHTSA component | LANE DEPARTURE; EQUIPMENT; EQUIPMENT ADAPTIVE/MOBILITY; FORWARD COLLISION AVOIDANCE |
NHTSA's summary
Certain 2019 MY Elantra (ADa) vehicles may experience the Blind-Spot Collision Warning (BCW) light displayed on the instrument cluster. In some cases one and/or two of the following DTCs can be set: ? C2702 ? Control Module Missing Calibration ? C2703 ? Control Module Slave Missing Calibration This bulletin provides the service procedure to replace the left and right Blind-Spot radar modules.
The document
The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.
Components
Driver assistance, Equipment and accessories
Trouble codes named
C2702, C2703
| HYUNDAI ELANTRA | 2019 |
|---|
Listing a model year does not mean every vehicle of it is concerned: the document says which.
| 24-01-009H | 2024-03-05. Service bulletin. This bulletin provides the service procedure to: 1) Upgrade the IBU/BCM (Integrated Body Control Unit/Body Control Module) to revise the OEM Hyundai burglar alarm system operation and ignition start logic and 2) Install two anti-theft decals for the front windows. Additional decals may also be installed in the rear windows at customer’s discretion. |
|---|---|
| 24-01-009H | 2024-03-05. Service bulletin. Hyundai has launched an anti-theft software upgrade and window decal campaign (Campaign 993), combined with an anti-theft steering wheel lock campaign (Campaign P32), and anti-theft ignition cylinder protector campaign (Campaign 9A5) in response to an increase in thefts of certain 2011-2022MY Hyundai vehicles not equipped with engine immobilizers targeted through social media. For certain vehicles that cannot be upgraded with the software (Campaign 993), Hyundai is offering customers an anti-theft ignition cylinder protector to be installed on their vehicle. This Dealer Best Practices Guide provides information to assist dealership personnel with customer questions relating to the immobilizer software upgrade, window decals and steering wheel lock anti-theft solutions available from HMA through Hyundai dealers. |
| 23-01-014H-5 | 2023-08-02. Service bulletin. Hyundai has launched an anti-theft software upgrade and window decal campaign (Campaign 993), combined with an anti-theft steering wheel lock campaign (Campaign P32), in response to an increase in thefts of certain 2011-2022MY Hyundai vehicles not equipped with engine immobilizers targeted through social media. For certain vehicles that cannot be updated with the software (Campaign 993), Hyundai is offering customers steering wheel locks at the dealer (Campaign P32). |
| 22-01-043H | 2022-06-10. Service bulletin. Hyundai is conducting a service campaign to enhance the knock sensor logic with the Cylinder Noise Diagnostic System (CNDS) software update. CNDS is to detect abnormal cylinder wall scuffing or noise of the engine block before potentially severe engine damage occurs. If abnormal noise is detected, the Malfunction Indicator Lamp (MIL) will blink continuously. In addition, DTC P1327 will be recorded in the ECM. |
| 21-EM-004H | 2021-04-07. Service bulletin. This bulletin provides the service procedure for engine connecting rod bearing clearance testing. Perform the procedure outlined in this bulletin to fulfill the Bearing Clearance Test inspection requirements to determine next required steps. |
| 21-BR-002H | 2021-04-07. Service bulletin. This bulletin provides best practice recommendations when performing brake service procedures. |
| 21-EM-003H | 2021-04-06. Service bulletin. This bulletin provides the inspection procedure and repair guidelines for certain vehicles listed below. |
| 21-BE-006H | 2021-04-06. Service bulletin. Certain 2019-2020MY Santa Fe and 2018-2020MY Elantra equipped with the front multifunction camera may exhibit one or more of the following warnings on the instrument cluster; Lane Keep Assist System (LKAS), Front Collision Avoidance Assist (FCA), High Beam Assist (HBA), Smart Cruise Control (SCC), and Autonomous Emergency Braking (AEB). This bulletin describes the procedure to replace the front camera/ multi-function camera. |
| 20-01-039H | 2020-11-06. Service bulletin. This bulletin provides information and procedures for collecting OBD “In Use Monitor Performance Ratio” (IUMPR) data on certain 2019-2021MY vehicles at California dealers. This reporting is mandated by CARB (California Air Resources Board). |
| 20-BE-006H-1 | 2020-10-08. Service bulletin. Certain 2019-2020MY Santa Fe and 2018-2020MY Elantra equipped with the front multifunction camera may exhibit one or more of the following warnings on the instrument cluster; Lane Keep Assist System (LKAS), Front Collision Avoidance Assist (FCA), High Beam Assist (HBA), Smart Cruise Control (SCC), and Autonomous Emergency Braking (AEB). This bulletin describes the procedure to replace the front camera/ multi-function camera. |